I have many parts for sale...
Please make an offer on any of the following.
Wheels - 14x6
*I started sanding one of the wheels because I was going to repaint them.
$400
http://i71.photobucket.com/albums/i134/hadriancox/perf1401.jpg

Wheels - Simmons V4 15 x 7.5 + 6.5 SOLD
$ - Offers


323i Swaybars with poly bushes, painted red. SOLD
*323i swaybars are thicker than other model E21 swaybars
$200


E21 323i Bilstein Sport shock absorbers SOLD
*the threads on the front shocks may need to be filed. Fits all E21 models.
$500


E21 King Springs (brand new in box) SOLD
Lower the car by 30mm. Work on all E21 models
$250

Whadya gonna do, buy an R32? You haven't even driven the thing yet! :P

oi hadrian will those sways fit on my 318i?

oi hadrian will those sways fit on my 318i?

yep. I think... someone confirm? I know the front will...

Whadya gonna do, buy an R32? You haven't even driven the thing yet! :P

I drove it 150km last year :D

I will go car less for a while, I can't afford cars at the moment, and need to move house soon.

I might be interested in the simmons wheels if they're a good offset. Have you got any other pics of the wheels? On an e21?

I might be interested in the simmons wheels if they're a good offset. Have you got any other pics of the wheels? On an e21?

Dunno the offset, and no, no pics of them on the car.
I'll check the offset tomorow, but they're meant to fit an E21 without spacers...

heres another question hadrian, are they just the stock 323i sways? or are they heavy duty ones.

Just normal ones I'm pretty sure... they were advertised as Whiteline when I bought them, but I don't think they are, have to double check.

Hey mate I'm In Melbourne...

Whats the condition of the Bilsteins?

How old are they? And why are you getting rid of them?

Hey mate I'm In Melbourne...

Whats the condition of the Bilsteins?

How old are they? And why are you getting rid of them?


I never had them in my car so can't say if the condition is good but if you want to come and see them thats fine.

Not sure how old they are either, sorry.

I'm selling all my E21 stuff and my E21 'coz I can't afford to have a car right now, I will get another E231 one day...

Hadrian, I PM'd you about the wheels. Still wanna sell them?

Hadrian, I PM'd you about the wheels. Still wanna sell them?

Yeah shit sorry, havne't measured the offset sorry. I know they fit without spacers though.

I'll measure and take moar pics.

No drama's. Look forward to hearing from you.

Offset:

Front: +37.5
Rear: +25

Does that sound right?

Offset:

Front: +37.5
Rear: +25

Does that sound right?

he would be looking for something around 12-15

Hmm that's strange, I think I fucked something up.

It's 120mm from muonting surface of the wheel to the inside of the wheel.

Hmm that's strange, I think I fucked something up.

It's 120mm from muonting surface of the wheel to the inside of the wheel.

Sounds about right. You take the centre line widths of 95 and 83mm from the 120mm backspace and get the offset of 25 and 37 don't you?

I'm not sure these are the wheels for me. I don't like the idea of flaring the fenders for that 7.5" wheel with spacers. Bummer.

Spacers?

Thats just it for me too. I assume they effectively create a mounting plate on top of the original to get the wheels to fit.

The reason I don't want to do it is because all that extra width (in the wheels and the spacers) will probably give me a tyre that will rub on my rear fender.

They fit without spacers.

"The stock wheel size is 13 x 5.5 et18, lug pattern 4x100, center bore 57.1mm, 185/70R13 tires. The most common upgrade wheel size is a 15x7 et12-15 with 205/50r15 tires. I’ve heard of 18mm offsets fitting on some wheels. On a 15” wheel a larger offset will not work because the inside lip of the wheel hits the tie rod ball joint. 16” and 17” wheels with higher offsets will fit because the diameter is large enough to clear the tie rods, but try to keep the offset as close to stock as possible.

Honda wheels and the like will fit with spacers, but keep them hub centric and try keep your offset at 15mm. For example, a 16x7 et40 wheel will require a 25mm spacer to fit. Also, a good idea with spacers is to upgrade to lug studs. You can buy them from BMP"

This is from jrcook's post on wheels in the FAQ thread.

a high-offset wheel on an e21 can hit the strut/shock and/or other suspension components.

This is from todor on another thread.

There just seems like there's a lot of opinion going around that wheels of this high an offset wont fit without spacers. I'm just not game enough to go for these Hadrian.

$450 on the simmons?

nah, sorry

Dr. Z,

These were my old wheels and I sold them to Hadrian. They are the correct offset and fit without spacers. The brand is Performance and they have Kelly Ritmo tyres with lots of tread.

http://i73.photobucket.com/albums/i235/slowe21/goldwheels.jpg
http://i73.photobucket.com/albums/i235/slowe21/goldwheels2.jpg

That could be a good trade off. They look really good on your car. How much work is it to repaint a wheel?

Me? No clue...

about this much work

http://forums.bimmerforums.com/forum/showthread.php?t=800627


i had mine done by wheel techniques they are amazing!

That could be a good trade off. They look really good on your car. How much work is it to repaint a wheel?

My bad also.... just re-read and saw that you were referring to the Simmons!

The Performance wheels are great. Light and 14x6

Yeah they're lighter than the steel wheels despite the size. Maybe lighter than the stock alloys too.

Bump! Everything Must Go!!!! Cheapp!!!!!!

Make An Offer On Anythingggggggggg

pm sent.

pm replied.

What have you sold so far?

Nothing :eek:

Except the car.

I found that my front sway bar is bent, so i'll need a new one anyway. i'll have a talk to my mechanic mate and i might go for those bars. I'll give ya a text when i'm sure.

cool

hey, can you send me a pm with approx dimensions for the struts? organising major freight today for work, so i can get a price to send your stuff up here too if you dont mind. :)

Hi, do you still have these parts for sale?

Yes, what are you interested in?

Also have some ACDelco rear shock absorbers for sale. Brand new, never used.

I might be interested in some of those parts mate depending on finances...

I'm coming down to melbourne in early march to pick up my new car...

Cool let me know.

Hmm that's strange, I think I fucked something up.

It's 120mm from muonting surface of the wheel to the inside of the wheel.

CALL TIRE RACK AND ASK WHAT THE OFFSET IS, DON'T QUOTE ME BUT I BELIEVE THAT THE E21 OFF SET SHOULD BE 0

Page one updated.

323i Swaybars with poly bushes, painted red. SOLD

Resurecting this one even though all parts are now sold...

Hadrian where did you get the poly bushes?

They came with the swaybars which I bought on ebay.

I think a company called superflex make them?