I found this thread about how to wire your hazards to flash instead of the alarm chirping when you lock/unlock your car if you have the stock BMW alarm. Has anyone done this? I want to do this but I want the chirp to stay and have the hazards flash in addition to the chirp. What do I have to do differently than what is explained in that thread? And where is this wiring going on? They didn't even say where all those pins are. What size wire would be needed for this type of application? Any help is appreciated. Thanks.

http://forums.bimmerforums.com/forum/showthread.php?t=397877

Edit: Ok, I guess it says this will work w/ or w/o the siren but either way I'm not sure where this is located.

Yeah mine is set up this way. Mind you I didn't use a plug and play harness. I'll look into it in the morning and tell you whats up.

my angel eyes and tail lights flash when i arm/disable

oooohhh coool

haha

actually that is

what if the car has no alarm, is this not even possible?

oooohhh coool

haha

actually that is

what if the car has no alarm, is this not even possible?
you could wire them into the dome lights, so when you open the car with the key the angel eyes and taillights will fade on just like the domelights.;)

Yeah I know how to do that already.

Anyone else on the original question?

you could wire them into the dome lights, so when you open the car with the key the angel eyes and taillights will fade on just like the domelights.;)

my friend has that on his E46, it's hot!

you could wire them into the dome lights, so when you open the car with the key the angel eyes and taillights will fade on just like the domelights.;)


do you know where a DIY is for this?

ok, now back to the original topic, i dont want to crap on your thread

do you know where a DIY is for this?

ok, now back to the original topic, i dont want to crap on your thread
http://forums.bimmerforums.com/forum/showthread.php?t=820659
at the bottom

do you know where a DIY is for this?

ok, now back to the original topic, i dont want to crap on your thread

Try this.

http://forums.bimmerforums.com/forum/showthread.php?t=409748&highlight=DIY+Remote+Angel+Eye+Fade+On%2FOff+PICTU RES+VIDEO

And yes, could we please get back to my original question? :bash

hook the horn output wire on the alarm to a relay and then put the power out from the relay to the parking lamps.

I found this thread about how to wire your hazards to flash instead of the alarm chirping when you lock/unlock your car if you have the stock BMW alarm. Has anyone done this? I want to do this but I want the chirp to stay and have the hazards flash in addition to the chirp. What do I have to do differently than what is explained in that thread? And where is this wiring going on? They didn't even say where all those pins are. What size wire would be needed for this type of application? Any help is appreciated. Thanks.

http://forums.bimmerforums.com/forum/showthread.php?t=397877

Edit: Ok, I guess it says this will work w/ or w/o the siren but either way I'm not sure where this is located.

.

Is this in behind the glovebox?