I have ZKW projectors that came out of my E36, however when they were pulled out at the shop, I never got my connectors back. It's been months and i was going to sell my lights now and noticed I don't have these. Is there any place I can buy them.

You're talking about the connectors that just screw on right? You're going to want to contact the stealership. Otherwise you can contact Vendor: Habbie for a set of PnP connectors.

You're talking about the connectors that just screw on right? You're going to want to contact the stealership. Otherwise you can contact Vendor: Habbie for a set of PnP connectors.

I guess i'll have to take a trip to the stealer, or at least know a part number so that who ever buys it can get it at the dealer.

My buddy has them on his ZKWs. I can get the part number off of them later today. Did a quick search of realoem.com and couldn't find them. I'm sure another member on here has them.

The molex connector is not available anywhere but through a dealer or possible Pelican Parts. I tried to order form electronics warehouses and the mfr has the part marked not available for request or only available to customer(meaning BMW)... something like that. You can get the PnP adapter from Habbie or ~U~
~Phil

The only part number I could find on it was on the inside on a lip of it:

962181-1

Thanks guys. I'll visit the stealership this week. hopefully they have them.

Hello - did you find the screw on connectors for your ZKW headlights? If so - do you have part numbers? Did you also need to buy pins?

FYI - It is the same connector used on the E36 AFM. Find some wrecked cars and cut them off :thumbup:
~Phil

What a great suggestion! I just checked my 94 325is - not the same.

But I remembered I had 2 extra OBD-II harnesses in the basement and yippie! the OBD II harness AFM fits!

What a great suggestion! I just checked my 94 325is - not the same.

But I remembered I had 2 extra OBD-II harnesses in the basement and yippie! the OBD II harness AFM fits!
I'm so the man :redspot
~Phi

Ok Phil - since you are the man - tell me...why the OBD I AFM connector does not fit. I checked the ETK in group 61 the 4 POL connector for a 1994 (OBDI) and a 1998 (OBDII)E36 show the same part number. 61.13.1.392.222

If I were to order this connector from BMW, would I get a OBD I connector (which does not fit) or would I receive a OBD II AFM connector (which to your credit does fit)?

Answer me that oh great one.

i may have a few pins at home

i have all the part#'s written down
i'll post them later when i get home from work

check out this page for info regarding making your own connector properly.

E36 European "Ellipsoid" Headlights (http://www.topquark.net/)

scroll down a bit.

nice find

all the info is there