I know I need to do motor and tranny mounts and front wheel bearings, and Brandon also needs to do motor mounts. So, here's the thread for the planning of the getting together to fix our ever-breaking, ever-lovely vehicles. Who else has stuff needing to be fixed before the long, cold winter ahead? Dan, is your garage still open for business?

ive got to do the waterpump on the 320 and also change the driveshaft on the 325i

I need to service and install a LSD....

do the LSD before we get snow. it helps... alot!

i need to do a parking brake rebuild and install my micro filter.

i had my own project day with ryan the other day
watre pump, thermo, thermo housing, idle pulley, ac pulley, tensionr pulley, fan switch, throttle sensor. it was fun

can this day be a sunday?

i have nothing but i like to help. bryan i didnt get the Bible back so i couldnt get it to you this weekend.

ok Dan can't post at his desk so he asked me to post this up for him.

Dan:

"Since I cannot post here at work, I’ll host a project day. This weekend, I will be out of town, so anytime after that will be fine."

I'm out of town this weekend as well, I figure most people will be busy with Thanksgiving festivities, so how about the Sunday of the weekend following? Which would be....December 2nd.

hmmm i can probably stop by after the BMWCCA Christmas party if it is on the 2nd.

I NEED to do the water pump, timing belt on the e30, also the oil filter housing o-ring and the oil cooler line rings. I need to get on my stuff ASAP.. how soon where you mofos looking at doing a project day?

i can do the 2nd....but i'll be gone after that in New York. haha....i doubt anyone wants to drop the tranny for a starter, so ill just do my brakes i've been holding off on so long. unless anyone has a jack to lower the tranny with.

you shouldnt have to drop the tranny for the starter. with the tranny mounts off and the nuts off the motor mounts, you should be able to tilt the tranny/motor back, take the 2 bolts that hold the starter in off, and slide the starter out. at least thats how i did it when i put the LTW flywheel in.

No Cowboy game that day or school... I am able to lean... I mean help with something/tools

2nd is the BMWCCA christmas party...so no can do. Wish I could get my new rotors & pads in time for the next mechanics party....

How about the 8th or 9th of Dec? I would like to attend the BMWCCA Xmas party.

Dan

i have springs that need to be installed on the wagon, and some of you older gen boys can take a peep at the e28 for me. i need to get some shocks first before i put on the springs...thanks grant. haha

How about the 8th or 9th of Dec? I would like to attend the BMWCCA Xmas party.

Dan

i would prefer the 8th or 9th. I am starting a new job that first week, plus i have finals so im giong to be pretty well preoccupied.

oh!!! did you get the job??!! yay!!!!!!!!

i can do either but i prefer Saturday the 8th.

Ok, so the 8th or 9th...we need a poll.

i wont be here on the 8th. no can do.. ill be in NYC.

I've been wanting to get involved with the MOFOs ever since I bought my car last Spring. Unfortunately, I have no experience with working on my car (although I did change my corners and sidemarkers the other day, heh), but...if you guys would be willing to let me watch and learn, I'd be willing to bring alcohol or pizza or something. :)

I've been wanting to get involved with the MOFOs ever since I bought my car last Spring. Unfortunately, I have no experience with working on my car (although I did change my corners and sidemarkers the other day, heh), but...if you guys would be willing to let me watch and learn, I'd be willing to bring alcohol or pizza or something. :)

Uh, yeah....you're in like Flynn....don't worry about knowing anything or not...you'll learn tons and we always have a good time.

Was the location decided?

its gonna be at dan's. so let's have a poll! no poles this time.

lotus do you work in Midwest City? i may have seen you today.

lotus do you work in Midwest City? i may have seen you today.

To "formally" introduce myself: my name is Kristin. :)
I don't work in Midwest City, and I wasn't driving anywhere near there today, so I don't think that was me. I live in Oklahoma City and work in Norman.

oh ok. wrong person. i think the driver was a bald guy. and now that i think of it, i think it was a coupe. same color car and same type of wheels as yours though. nice to meet you.