cooljess76
11-13-2007, 08:29 PM
SOLD!
http://i135.photobucket.com/albums/q122/cooljess76/Cimg0001-2.jpg
Up for sale is a BRAND NEW, never installed AutoSolutions SSK for an e30 318i or is. This kit reduces throw by 40-55% and eliminates front to rear & left to right slop. It's specifications exceed OEM strength and precision by utilizing "no weld" construction, a "zero clearance" bronze bushing, CNC machined SOLID selector rod, one-piece billet coupler, pressed pivot points and a fully banded 6061 T6 billet aluminum vibration-free handle.
http://i135.photobucket.com/albums/q122/cooljess76/Cimg0006-2.jpg
This SSK retails for about $255. It isn't a cheap ebay kit. I bought this kit with intentions of using it on my 318ti, but after doing a part# cross-reference on realoem, I found that I could only use the shift lever without the selector rod which would only reduce the throw by 35%. Simply put, I bought the wrong kit and my loss is your gain.
http://i135.photobucket.com/albums/q122/cooljess76/Cimg0004-1.jpg
According to realoem, the lever will fit the following vehicles:
E30 318i
E30 318is
E30 325i
E30 325ix
E36 318ti
The selector rod will fit:
E30 318i
E30 318is
E34 525i
However, the complete kit is designed to fit the e30 318 for maximum reduction and performance. AutoSolutions claims that a "Quick Install" of just the lever takes approximately 30-40 minutes and the "Complete Install" of the lever and selector rod takes approximately 1-2 hours. More info on the kit could be found here: http://www.autosolutions.net/index.html
http://i135.photobucket.com/albums/q122/cooljess76/ssk.gif
I'm selling this kit for $150 shipped to anywhere in the lower 48 or $140 picked up in Ventura, CA. That's over a hundred bucks less than retail! Please keep in mind that this kit is BRAND NEW and comes with detailed/photo installation instructions. This is the COMPLETE kit, not just the BASIC kit. AutoSolutions makes this kit exclusively for BMPdesign.
Compare it to their prices:
BMPdesign Pricing (http://www.bmpdesign.com/category-exec/category_id/51/search_year/1991/search_model/31)
Check out AutoSolutions website:
Link To AutoSolutions (http://www.autosolutions.net/index.html)
Here's a thread from 2 years ago about this SSK:
Link To Thread Oct 2005 (http://www.318ti.org/forum/showthread.php?t=6949)
Here's what the same guy has to say about it after using the kit 2 years later(see post# 7):
Link To Thread Nov 2007 (http://www.318ti.org/forum/showthread.php?t=19305)
I'll include the Sparco knob shown in the photos for an additional 40 bucks! It's an $80 weighted knob and compliments any BMW interior. It's used and shows minor wear on the top aluminum piece. The knob isn't for sale separately, I really like it but I figured it might help the sale if I offer it as an added incentive.
http://i135.photobucket.com/albums/q122/cooljess76/Sparco3_WEB.jpg
http://i135.photobucket.com/albums/q122/cooljess76/Cimg1565.jpg
Just in time for the holidays guys!!!
$150 shipped for the AutoSolutions SSK or $190 shipped for the SSK w/Sparco knob!
SOLD.
http://i135.photobucket.com/albums/q122/cooljess76/Cimg0001-2.jpg
Up for sale is a BRAND NEW, never installed AutoSolutions SSK for an e30 318i or is. This kit reduces throw by 40-55% and eliminates front to rear & left to right slop. It's specifications exceed OEM strength and precision by utilizing "no weld" construction, a "zero clearance" bronze bushing, CNC machined SOLID selector rod, one-piece billet coupler, pressed pivot points and a fully banded 6061 T6 billet aluminum vibration-free handle.
http://i135.photobucket.com/albums/q122/cooljess76/Cimg0006-2.jpg
This SSK retails for about $255. It isn't a cheap ebay kit. I bought this kit with intentions of using it on my 318ti, but after doing a part# cross-reference on realoem, I found that I could only use the shift lever without the selector rod which would only reduce the throw by 35%. Simply put, I bought the wrong kit and my loss is your gain.
http://i135.photobucket.com/albums/q122/cooljess76/Cimg0004-1.jpg
According to realoem, the lever will fit the following vehicles:
E30 318i
E30 318is
E30 325i
E30 325ix
E36 318ti
The selector rod will fit:
E30 318i
E30 318is
E34 525i
However, the complete kit is designed to fit the e30 318 for maximum reduction and performance. AutoSolutions claims that a "Quick Install" of just the lever takes approximately 30-40 minutes and the "Complete Install" of the lever and selector rod takes approximately 1-2 hours. More info on the kit could be found here: http://www.autosolutions.net/index.html
http://i135.photobucket.com/albums/q122/cooljess76/ssk.gif
I'm selling this kit for $150 shipped to anywhere in the lower 48 or $140 picked up in Ventura, CA. That's over a hundred bucks less than retail! Please keep in mind that this kit is BRAND NEW and comes with detailed/photo installation instructions. This is the COMPLETE kit, not just the BASIC kit. AutoSolutions makes this kit exclusively for BMPdesign.
Compare it to their prices:
BMPdesign Pricing (http://www.bmpdesign.com/category-exec/category_id/51/search_year/1991/search_model/31)
Check out AutoSolutions website:
Link To AutoSolutions (http://www.autosolutions.net/index.html)
Here's a thread from 2 years ago about this SSK:
Link To Thread Oct 2005 (http://www.318ti.org/forum/showthread.php?t=6949)
Here's what the same guy has to say about it after using the kit 2 years later(see post# 7):
Link To Thread Nov 2007 (http://www.318ti.org/forum/showthread.php?t=19305)
I'll include the Sparco knob shown in the photos for an additional 40 bucks! It's an $80 weighted knob and compliments any BMW interior. It's used and shows minor wear on the top aluminum piece. The knob isn't for sale separately, I really like it but I figured it might help the sale if I offer it as an added incentive.
http://i135.photobucket.com/albums/q122/cooljess76/Sparco3_WEB.jpg
http://i135.photobucket.com/albums/q122/cooljess76/Cimg1565.jpg
Just in time for the holidays guys!!!
$150 shipped for the AutoSolutions SSK or $190 shipped for the SSK w/Sparco knob!
SOLD.