I hate how my hazard light indicator lights up so brightly at night. Is there a way to either remove the bulb or cut the wiring so that I don't have to stare at the bright red triangle?

Thanks!

that light is dimmed by the dash light dimmer, but i suppose that isn't dim enough.

you don't say what car, so i can't offer too much. bentley has the wiring diagrams in my E36 book, and the fix you'd need for that car would be a one-wire snip.

if other switches are similar, you could do the whole job with a dmm, wire cutters and some tape...

Oh sorry! It's a 1996 328is... if you could let me know which wire to snip, I'd appreciate it!

The blue/green wire is the "on" position wire that goes to the hazard light system. Brown is ground, and grey/red goes to the dimmer (the "off" position), according to page ELE-216 of the Bentley manual ((Interior lights/illumination: 1994-97 Except 318ti & Convertible (1 of 2)"). Hypothetically, cutting the grey/red should disconnect the light. I'm not responsible if this breaks something else, though, so proceed at your own risk...

BTW - "on" and "off" refer to the switch position, not lighting.