View Full Version : Does anyone know what Webber 40dcoe's require for fuel pressure???


e34bmw540i
11-10-2007, 09:07 PM
NEED TO KNOW. Thanks

visionaut
11-11-2007, 12:07 AM
Low pressure, high volume fuel delivery. 2.5-4.0 PSI

Tom

e34bmw540i
11-11-2007, 12:33 AM
Thanks a lot. I put my webbers on today and the pump that i put on says 4-7psi. The car wont go below 3000 rpm would this be because it is getting to much fuel? And would you suggest i get a fuel pressure regualtor to step it down??

ToddK
11-11-2007, 09:31 AM
I read on Weber's web site that the max pressure is 3.5PSI. Any more and you need a regulator.

visionaut
11-11-2007, 12:39 PM
Thanks a lot. I put my webbers on today and the pump that i put on says 4-7psi. The car wont go below 3000 rpm would this be because it is getting to much fuel? And would you suggest i get a fuel pressure regualtor to step it down??

Yeah, get a regulator to step the pressure down some. See if you can get an inline meter to verify the pressure adjustment output too if you can.