http://www.namotorsports.net/images/logo.gif (http://www.namotorsports.net/index.cfm/id/bmw)

Last week at the SEMA show we were wandering through one of the many halls when we ran into the Senko company. They weren't on our list of people to talk to, but when we saw their products we became excited. They make sheets of carbon and glass fiber that you can use to cover basically anything you want. Check out pictures and pricing below :thumbup:

http://www.namotorsports.net/images/redline.jpg
http://www.namotorsports.net/images/SE70081-01.jpghttp://www.namotorsports.net/images/CarbonCut.jpg

Performance Carbon Fiber Small Black Sheet (200mm x 240mm / 7.87" x 9.45") - $34.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70081-01)

Performance Carbon Fiber Medium Black Sheet (240mm x 600mm / 9.45" x 23.62") - $69.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70081-02)

Performance Carbon Fiber Large Black Sheet (480mm x 600mm / 18.90" x 23.62") - $99.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70081-03)

Performance Carbon Fiber Extra Large Black Sheet (480mm x 1193mm / 18.9" x 47") - $194.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70081-04)

Product Description:
Performance Carbon™ is manufactured from Real Carbon fibers, with an automotive OE quality adhesive backing. The twill-weaved texture proves its authenticity and provides the performance image your ride deserves.

Performance Carbon is flexible, pliable and durable enough to withstand extreme temperatures and abrasion, making it the only choice for both interior and exterior applications.

Applying Performance Carbon is as easy as (1) Measure, (2) Shape, (3) Peal and Stick.

Measure: Dimensions can be drawn right on the removable backing

Shaping: Done with a simple pair of scissors or a sharp blade. Cut edges always come out smooth and will never fray.

Installation: Simple as peal and stick. Allow the adhesive to cure for 24 hours and you have a highly durable installation that stands up to weather, car washes, abrasion, dust and dirt.

http://www.namotorsports.net/images/redline.jpg

http://www.namotorsports.net/images/SE70082-01.jpg

Performance Carbon Fiber Small Silver Sheet (200mm x 240mm / 7.87" x 9.45") - $34.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70082-01)

Performance Carbon Fiber Large Silver Sheet (480mm x 600mm / 18.90" x 23.62") - $99.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70082-03)


http://www.namotorsports.net/images/Red_Weave.jpg

Performance Carbon Fiber Small Red Sheet (200mm x 240mm / 7.87" x 9.45") - $34.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70083-01)

Performance Carbon Fiber Large Red Sheet (480mm x 600mm / 18.90" x 23.62") - $99.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70083-03)


http://www.namotorsports.net/images/Blue_Weave.jpg

Performance Carbon Fiber Small Blue Sheet (200mm x 240mm / 7.87" x 9.45") - $34.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70084-01)

Performance Carbon Fiber Large Blue Sheet (480mm x 600mm / 18.90" x 23.62") - $99.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70084-03)


http://www.namotorsports.net/images/Pink_Weave.jpg

Performance Carbon Fiber Small Pink Sheet (200mm x 240mm / 7.87" x 9.45") - $34.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70085-01)

Performance Carbon Fiber Large Pink Sheet (480mm x 600mm / 18.90" x 23.62") - $99.00 plus shipping (http://www.namotorsports.net/detail.cfm/part_cd/SE70085-03)

Product Description:
Performance Carbon™ Silver, Red, Blue and Pink are manufactured from Real Glass Fibers, with an automotive OE quality adhesive backing. The twill-weaved texture proves its authenticity and provides the performance image your ride deserves.

Performance Carbon Blue is flexible, pliable and durable enough to withstand extreme temperatures and abrasion, making it the only choice for both interior and exterior applications.

Applying Performance Carbon Blue is as easy as (1) Measure, (2) Shape, (3) Peal and Stick.

Measure: Dimensions can be drawn right on the removable backing

Shaping: Done with a simple pair of scissors or a sharp blade. Cut edges
always come out smooth and will never fray.

Installation: Simple as peal and stick. Allow the adhesive to cure for 24 hours and you have a highly durable installation that stands up to weather, car washes, abrasion, dust and dirt.

http://www.namotorsports.net/images/redline.jpg

Tax:
All Connecticut customers will be charged 6% Connecticut Sales tax.

Shipping:
All orders will be shipping via UPS. If you are interested in shipping to Hawaii, Alaska, Puerto Rico and Canada, plesae call us. You will be charged additional shipping fees.

Payment:
We accept all major credit cards and Paypal. All website orders can be done directly through our site http://www.namotorsports.net. Please just click any of the product links above to go directly to our site. Call us toll free at 1-877-NAMOTORS to place your order over the phone.

Hours of Operations: - Now open at 9AM on Weeekdays!
Monday - Thursday from 9AM to 7PM EST
Friday from 9AM to 5PM EST
Saturday from 10AM to 3 PM EST
Sundays we are closed

Retail Showroom:
Come check out our new 6000 square foot facility in Vernon, Connecticut. Click here (http://www.namotorsports.net/visitus.cfm) for directions.
Our website http://www.namotorsports.net is always open :thumbup:

Contact Info:
Phone: 1-877-NAMOTORS
Email: nick@namotorsports.net
Website: http://www.namotorsports.net
PM: namotorsports
AIM: NickAtNamotors
MSN: NAMotorsports@msn.com
Yahoo: NickAtNamotors

Any questions, feel free to PM me or call toll free at 1-877-NAMOTORS :thumbup:

How would one go about molding it onto a curved piece?

+1

wow, i can just imagine.... moldings, door pilars, grills, ltw underpanel, slats! i just want to see someone else buy it first and then try it!

How would one go about molding it onto a curved piece?

If you want to make tight corners and edges, you can heat it up using a heat gun. The possibilites are truly endless with this product!

wow, i can just imagine.... moldings, door pilars, grills, ltw underpanel, slats! i just want to see someone else buy it first and then try it!

The first person to order, install it and take pictures will get free shipping!

so its actually real cf?

^
Product Description:
Performance Carbon™ is manufactured from Real Carbon fibers, with an automotive OE quality adhesive backing. The twill-weaved texture proves its authenticity and provides the performance image your ride deserves.

^
Product Description:
Performance Carbon™ is manufactured from Real Carbon fibers, with an automotive OE quality adhesive backing. The twill-weaved texture proves its authenticity and provides the performance image your ride deserves.

You are correct, the black is real carbon fiber, the other colors are glass fiber.

hummm........i would like to see photos of someone with it installed on something curved.

WOW this is cool As hell :)... When my motor is done I will so be in on this stuff..

hummm........i would like to see photos of someone with it installed on something curved.

We are working on getting more photos. Hopefully soon!

WOW this is cool As hell :)... When my motor is done I will so be in on this stuff..

:D Let us know when you are ready!

im really trying to think about where I would put the red. Any one ordered this yet?

im really trying to think about where I would put the red. Any one ordered this yet?

We have not had anyone order here it on Bimmerforums. I'm willing to do free shipping for the first person to order!

We have not had anyone order here it on Bimmerforums. I'm willing to do free shipping for the first person to order!

sadly the only thing I could consider doing this on would be the pillars. Do you have any pics of any other vehicles you could post?

sadly the only thing I could consider doing this on would be the pillars. Do you have any pics of any other vehicles you could post?

I'm waiting for some pictures of an Audi R8 and Mini Cooper :D

(subscribing)

pm sent!

pm sent

may consider makin under pannel, i might us aluminum though. though decision now.......

All private messages have been replied to!

I would totally buy Carbon Fiber Bed Sheets.

I would cover my non-m rear diffuser in this stuff.

I would totally buy Carbon Fiber Bed Sheets.

Those might not be too comfortable!

I would cover my non-m rear diffuser in this stuff.

That sounds like it could be cool. For anyone looking for samples, please let me know and I'd be happy to send you out a small piece so you get a better idea of what it looks and feels like.

could i get a sample please
i'll pm you my info

could i get a sample please
i'll pm you my info

It's in the mail!

That sounds like it could be cool. For anyone looking for samples, please let me know and I'd be happy to send you out a small piece so you get a better idea of what it looks and feels like.
PM sent. Thanks :alright

Interesting product. Subscribing for pics.

tag

oem carbon fiber ltw strut bar?


hmmm

oem carbon fiber ltw strut bar?


hmmm

There are so many things you could do with this stuff!

PM sent, :shifty

PM sent, :shifty

PM replied!

hmm, cf body molding, and cf dash board with cf shift surround

hmm, cf body molding, and cf dash board with cf shift surround

The possibilities are endless my friend!

could I get a sample?

can i get a sample?

Anyone that wants a sample, please just PM me with your full name and address!

what size are the samples? just wont to know if it would be something i could use to try something to at least get a demo picture up.

i'll order a sheet- i've got a lot of pieces to do if it works decently.

wattsupcustoms@hotmail.com

maybe you can hook me up a bit and i'll flood the net with pictures- i've got some sick cars, lol.

i've got some interesting underhood pieces that should be made of that on my supercharged c43 (is the blue the only heat resistant color?)

-drew

what size are the samples? just wont to know if it would be something i could use to try something to at least get a demo picture up.

I'm only sending out inch by inch squares for samples. It's so people can see what the material is like and how flexible it is. I'm not sending out enough to do anything on your car. Let me know if you'd like a sample!

i'll order a sheet- i've got a lot of pieces to do if it works decently.

wattsupcustoms@hotmail.com

maybe you can hook me up a bit and i'll flood the net with pictures- i've got some sick cars, lol.

i've got some interesting underhood pieces that should be made of that on my supercharged c43 (is the blue the only heat resistant color?)

-drew

Drew,

What car would you be putting the carbon fiber on? This shouldn't have a problem with heat as long as you don't put it directly on the engine!

subscribing, very interested!

PM sent.

PM sent for a sample, i def. want to try this stuff out if the sample is what I'm looking for!

depends on how it goes-

C43 most certainly- I'll be making some custom underhood "covers" as soon as i work out where everything is going under there. I'd also like to cover my plastic engine cover with it. i definitely need to recover my factory fake cf pillars and "sport trim" interior with it- plus this will allow me to match my custom dash piece to the rest of the itnerior (im doing a 9.2" in-dash and some gauges where the stock piece used to be)


let's figure something out

PM sent for this samplee

How tacky is the adhesive backing? I ask because I'd actually rock this on my Apple Macbook Pro....cut out the apple logo so the light could shine through, but you get the gist :)

How tacky is the adhesive backing? I ask because I'd actually rock this on my Apple Macbook Pro....cut out the apple logo so the light could shine through, but you get the gist :)
that would be pretty cool:buttrock

How tacky is the adhesive backing? I ask because I'd actually rock this on my Apple Macbook Pro....cut out the apple logo so the light could shine through, but you get the gist :)

It is pretty sticky, but can be taken back off if you needed to. That would look very nice. I'd love to see it done.

depends on how it goes-

C43 most certainly- I'll be making some custom underhood "covers" as soon as i work out where everything is going under there. I'd also like to cover my plastic engine cover with it. i definitely need to recover my factory fake cf pillars and "sport trim" interior with it- plus this will allow me to match my custom dash piece to the rest of the itnerior (im doing a 9.2" in-dash and some gauges where the stock piece used to be)


let's figure something out

You have a PM!

just got my sample. this stuff looks freakin great. Just one question, whats the significance of the clear protective film and is it necessary? i will be putting this stuff on an external part that will see the weather

just got my sample. this stuff looks freakin great. Just one question, whats the significance of the clear protective film and is it necessary? i will be putting this stuff on an external part that will see the weather

I'd recommend using the protective coating if it's going to be exposed to the elements. I'm glad you like it!

is that lamination coating stuff necessary? when light isnt hitting it, you can see little bubbles the ridges of the CF that the lamination doesnt fill in

i wonder how it would look if you did the roof with this stuff:conf

please email me for a sample. i don't use PM's. thank you.

is that lamination coating stuff necessary? when light isnt hitting it, you can see little bubbles the ridges of the CF that the lamination doesnt fill in

You don't have to use the lamination, that's up to you.

please email me for a sample. i don't use PM's. thank you.

I'll need your full name and address to get you a sample.

please email me for a sample. i don't use PM's. thank you.

The manufacturer is supposed to have pieces large enough to do a roof sometime next year!

anyone have pics, yet?

anyone have pics, yet?


+1

+2 and does it hold up to heat like example under de hood area??

We've sold quite a few sheets of this, just don't have any pics for anyone yet. This should hold up to heat very well. I just wouldn't put it on the engine ;)

my sample got shipped out and I will have pics as soon as i get it.

my sample got shipped out and I will have pics as soon as i get it.

Let me know how you like the sample, but I don't think you will have enough material to really do much with it.

Here are some pictures of an Audi TT that had a custom stereo done with the some of this carbon fiber material. I hope people like it!
http://www.namotorsports.net/images/TTcarbon.jpg
http://www.namotorsports.net/images/TTcarbon2.jpg
http://www.namotorsports.net/images/TTcarbon3.jpg
http://www.namotorsports.net/images/TTcarbon4.jpg
http://www.namotorsports.net/images/TTcarbon5.jpg

I'd recommend using the protective coating if it's going to be exposed to the elements. I'm glad you like it!

So give me some more info about this. How sticky is it? Would it be sticky enough to be permanent when applied to paint? Safe to wash and wax without peeling off? Could it be removed if necessary without damaging the surface? Durable enough to hold up to the elements without fraying/discoloring/peeling? How much flex does it have? You said you can heat it to make it more plyable, but could it do complex curves and angles?

Say like could I coat these?

I did my steering wheel emblem with the sample. Honestly, I don't it wouldn't look as good as a tradition weave+resin because this material is textured and would leave raised edges if you're only doing certain portions of your car.

However, it's a great product for flat surfaces and trim.

So give me some more info about this. How sticky is it? Would it be sticky enough to be permanent when applied to paint? Safe to wash and wax without peeling off? Could it be removed if necessary without damaging the surface? Durable enough to hold up to the elements without fraying/discoloring/peeling? How much flex does it have? You said you can heat it to make it more plyable, but could it do complex curves and angles?

Say like could I coat these?

I would not use it on curve and angles, it's really designed more for flat surfaces. As far as washing it, that would be fine and waxing as well. You can remove it once it's on, you would just have to remove the adhesive residue afterwards.

It was designed to be used on the exterior of cars and to hold up to the weather. I think I might have mis spoken before, this has a clear coat already on it, the other piece that comes with it is for tracing the install, not a protective coating.

I did my steering wheel emblem with the sample. Honestly, I don't it wouldn't look as good as a tradition weave+resin because this material is textured and would leave raised edges if you're only doing certain portions of your car.

However, it's a great product for flat surfaces and trim.

Any pictures?

is it possible to do oh sayyy my roof with this?

is it possible to do oh sayyy my roof with this?
possible. i planned on doing this, but when i received the sample, the texture is lumpy. Looking at the roof at an angle with a glare would look just weird. its not smooth like CF hoods and other body parts

possible. i planned on doing this, but when i received the sample, the texture is lumpy. Looking at the roof at an angle with a glare would look just weird. its not smooth like CF hoods and other body parts

I think you could spray it with a coat of clear and it would look perfect imo. I got my sample but it is so small i can't really do much with it. I just question the sticky'ness of this and how long it would hold, that is really my only dought. It looks like in the audi, they got it to curve quite well. I am sure they heated it to do that.

also, they don't have sheets large enough to do your roof........yet.

when you heat it it activates the glue as well- I was able to do some pretty tight curves on the test piece i did the other day.

I'll have pics of my full trim in this stuff within a few weeks- currently i'm too busy with makign it run right.

-drew

here's a shot of it-

http://i51.photobucket.com/albums/f400/silentdrew/222.jpg

btw- i'm still waiting for a call letting me know my LARGE sheet has come in...

when you heat it it activates the glue as well- I was able to do some pretty tight curves on the test piece i did the other day.

I'll have pics of my full trim in this stuff within a few weeks- currently i'm too busy with makign it run right.

-drew

here's a shot of it-

http://i51.photobucket.com/albums/f400/silentdrew/222.jpg

btw- i'm still waiting for a call letting me know my LARGE sheet has come in...

Drew,

Can't wait for those pictures of your trim. We should have that large piece next week for you.

yeah, i'm sorry it's taken me so long to get started.

I had a couple set backs as will occur with daily driven fi project(S) lol.

subaru blew a oil seal in a turbo and i ended up swapping turbos, intercoolers, boost control systems, installing a new stereo (diamond hex series and old school zed audio made amps), and dyno tuning it

all that was while it was supposed to be my daily during my reworking of my C43 supercharger project (plan was to have it apart for 4-6 weeks) which in itself didn't work quite right either- and STILL is barely running (but it's making 300 whp below 5k rpms with crappy a/f and only 4 psi--- too bad it won't rev any higher than that without going lean, lol).

anyways, the product is going to work and i'm excited about it. I'll tackle the trim as soon as i can. I have also already found some uses for it under the hood in the mercedes project (going to make straight up custom covers for most of it- of course it needs to be running right before i do that though)

-drew


edit- i see you list aem up there in the sig, got a contact there you can bother about finding a way to truly tune my C43? No one seems to be able to provide tunign software for the ecu OR a way to install a standalone and have it run...

sample was greatt.. can a small sheet do the center console ?..

sample was greatt.. can a small sheet do the center console ?..

I'd take some measurements and then check out our site for the different sizes we offer.

yeah, i'm sorry it's taken me so long to get started.

I had a couple set backs as will occur with daily driven fi project(S) lol.

subaru blew a oil seal in a turbo and i ended up swapping turbos, intercoolers, boost control systems, installing a new stereo (diamond hex series and old school zed audio made amps), and dyno tuning it

all that was while it was supposed to be my daily during my reworking of my C43 supercharger project (plan was to have it apart for 4-6 weeks) which in itself didn't work quite right either- and STILL is barely running (but it's making 300 whp below 5k rpms with crappy a/f and only 4 psi--- too bad it won't rev any higher than that without going lean, lol).

anyways, the product is going to work and i'm excited about it. I'll tackle the trim as soon as i can. I have also already found some uses for it under the hood in the mercedes project (going to make straight up custom covers for most of it- of course it needs to be running right before i do that though)

-drew


edit- i see you list aem up there in the sig, got a contact there you can bother about finding a way to truly tune my C43? No one seems to be able to provide tunign software for the ecu OR a way to install a standalone and have it run...

I've never heard of anyone using the AEM engine management system on a Mercedes, didn't the kit come with new software?

no, the kit really doesn't come with new software.

they basically just clamp the maf voltage at 4.9 add a fmu and call it good (for 4 psi).

I have yet to find any true single tuning solution which can tune fuel and timing together.

Have sent quite a few emails to companies and gotten nothing back- split second has some options,but aren't ideal.

-drew

no, the kit really doesn't come with new software.

they basically just clamp the maf voltage at 4.9 add a fmu and call it good (for 4 psi).

I have yet to find any true single tuning solution which can tune fuel and timing together.

Have sent quite a few emails to companies and gotten nothing back- split second has some options,but aren't ideal.

-drew

Drew your extra large piece of carbon fiber is ready to ship. Give us call today or tomorrow. Toll free at 1-877-NAMOTORS!

sent a pm regarding sample. did you get it?

sent a pm regarding sample. did you get it?

Stanley,

I thought I had replied to you, we need your full name to get you the sample. Just PM me that. Thanks!

Interested in a sample...sent you a PM...tks!

Interested in a sample...sent you a PM...tks!

It's in the mail!

I pm'd for a sample a while back and never got one, i still really want to try this stuff out, but i would like to see it first.

I pm'd for a sample a while back and never got one, i still really want to try this stuff out, but i would like to see it first.

If you didn't get, I apolgoize. I may have missed your PM or it was lost in the mail. PM me your name and address again and I'll get a sample sent out tomorrow!

There are so many things you could do with this stuff!

Cylinder liners? :eek:

got the sample today... awesome stuff! I will be ordering some as soon as i get a chance to measure my sunroof panel.

pm sent for sample! Pics of trim?

got the sample today... awesome stuff! I will be ordering some as soon as i get a chance to measure my sunroof panel.

Sounds good, let us know when you are ready!

pm sent for sample! Pics of trim?

We'll send you out a sample tomorrow!

Got my sample today and it looks good. It will definitely need some heating to bend. My order will be coming soon.

more pics or EPIC FAIL!!!

I'd rather do something with a full sheet and then take pics. I'm thinking about using the sample and cutting out small crescent shaped cf pieces to add to my lighted shift knob. one above and below the numbers. If I do, I'll take pics of that.

I like to see a roof done.

I like to see a roof done.
in my honest opinion its gonna be too lumpy.

Send me a sheet and ill do my lip

Send me a sheet and ill do my lip

We are only sending samples that are 1 inch by 1 inch. If you'd like to do your lip, just buy a sheet :D

So any update pics yet?

I need some help from the BMW community. The manufacturer Senko has a very large size sheet ready, but I need to see if it's big enough for any cars of if they need to go bigger. I need measurements for the following roofs:

E36 Coupe and Sedan
E46 Coupe and Sedan
E39 Sedan
E60 Sedan

If people could provide me with that, it be a huge help!

e36 coupe roof:
54" by 45.5" measured on the safe side...

finally did my interior trim- still need to custom make a dash bezel for my gauges, hu etc.

i'll post pictures tmorrow likely

I might be interested in the roof.

-drew

^^ please post those pics ..im still intrested in this but i need to see how it turns out.

http://i138.photobucket.com/albums/q243/teamsilence1/IMG_0281.jpg

http://i138.photobucket.com/albums/q243/teamsilence1/IMG_0282.jpg

http://i138.photobucket.com/albums/q243/teamsilence1/IMG_0280.jpg

still waiting on my hu to arrive then i'll be making a new dash bezel for that, my 4 cyberdyne gauges, my wideband, etc.

I will snap good pictures at that point etc.

edit- also my 7" mids that go in the doors are cf and match pretty well

any word on the roof size sheets?

Can you check with the manufacturer and see if this stuff can be lightly scuffed and clear coated? that would solve the texture problem for people who want to use this on the outside of their car and make it looks stock (i.e. roof)

that definitely won't work

http://i138.photobucket.com/albums/q243/teamsilence1/IMG_0281.jpg

http://i138.photobucket.com/albums/q243/teamsilence1/IMG_0282.jpg

http://i138.photobucket.com/albums/q243/teamsilence1/IMG_0280.jpg

still waiting on my hu to arrive then i'll be making a new dash bezel for that, my 4 cyberdyne gauges, my wideband, etc.

I will snap good pictures at that point etc.

edit- also my 7" mids that go in the doors are cf and match pretty well

That really looks great, how did you like the material? Did you like working with it? I'm going to use some of your pictures on our website.

Also, for people looking for roof size sheets, Senko does have a 37.8 x 70 inch sheet, but it's not big enough to do roofs :(

give me a couple more days and i'll have some better pictures for you- that stuff is only the tip of the iceberg so far as what i'm covering.

I love the way the product looks, but it is a struggle to wrap complex shapes at times.

I am making engine cover pieces right now on that car as well as a custom dash (pioneer avh-4000dvd, 4 cyberdyne gauges, and ngk afx wideband- nothing else, climate control etc. is all going to the glovebox), and doing a bunch of the trim for parts of my custom stereo. It will make for some better pictures for sure.

give me a couple more days and i'll have some better pictures for you- that stuff is only the tip of the iceberg so far as what i'm covering.

I love the way the product looks, but it is a struggle to wrap complex shapes at times.

I am making engine cover pieces right now on that car as well as a custom dash (pioneer avh-4000dvd, 4 cyberdyne gauges, and ngk afx wideband- nothing else, climate control etc. is all going to the glovebox), and doing a bunch of the trim for parts of my custom stereo. It will make for some better pictures for sure.

Can't wait to see more pictures!

any more pics?

i have them on my camera- will upload later

i also need at least 1 more extra large sheet to finish the stuff i have going. I think my dash will seal the deal for a lot of people ordering it

NA: You guys should look into selling "Magic Carbon".

i'm just copying and pasting from what i posted elsewhere-

Did quite a bit of new stuff over this weekend.
all the obvious stuff in the pictures plus the tint as well
the underhood pieces are going to be wrapped in the cf down the road
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08012.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08013.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08011.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08009.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08008.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08006.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08007.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08014.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08015.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08017.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08016.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08019.jpg
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08018.jpg
also tinted the g
http://i138.photobucket.com/albums/q243/teamsilence1/cartintday08004.jpg