Starting to clear out the shop before the new year. All engine parts are sold as-is, where is, shipping the sole responsibilty of the buyer. I guarantee the parts to be clean and in said condition.

(2) S52 cranks. One has 40k miles, the second one has 68k miles. Neither crank shows any scoring, cracks, or other ailments. Both cranks have been safely stored in the bottom of blocks. $500 each

http://i36.photobucket.com/albums/e18/whakiewes/100_2441.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2442.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2443.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2444.jpg

S50 crank. Has over 100k miles. In very good condition with no scoring, although I would assume on purchase that it needs to be micropolished before installing (crank has been in storage for well over a year now). I can take care of this service through my machinest for whatever it costs. $350

http://i36.photobucket.com/albums/e18/whakiewes/100_2424.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2425.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2426.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2427.jpg

S52 Camshafts from 60k mile engine. Lobes are in very good condition. There is some mild scoring on the bearing journals which is very common (I have seen it in every set of cams I have bought or sold with the exception of one set). The scoring is not even enough to catch my finger nail and in no way should effect their use. Cam trays not included. $300

http://i36.photobucket.com/albums/e18/whakiewes/100_2445.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2446.jpg
http://i36.photobucket.com/albums/e18/whakiewes/100_2447.jpg

(2) OBD-2 plastic covers that say 'BMW' on them. Removed from 328's I believe. Both in good condition with possibly a little bit of residue on both. One needs a top cap, other includes both. $25 for one with both caps, $20 for one without one.

http://i36.photobucket.com/albums/e18/whakiewes/100_2430.jpg

S52 headers from 60k mile engine. In very good condition. One 02 bung has been welded shut for OBD-1 use. $100. Can have all the emissions crap for $20 more.

http://i36.photobucket.com/albums/e18/whakiewes/100_2429.jpg

Willing to sell S52 head complete with cams, full S52 valvetrain, S52 valve cover, ready to bolt onto M52's for $800. Can see the condition of the head from the above photo.

Any other S52 parts that you may need (rods, pistons, caps, nuts, bolts, housings, etc...) I have. Just PM me what you need, ill find it, and give you a price. PM is best form of contact.

Wes

got any junk s52 heads??

Sorry, no junk heads. I have an M50 non-vanos head I would sell considerably cheaper though if you were looking for something to practice on. I also have several other BMW heads (M20, M30) you can play with as well that I can sell cheap.

Wes

give me a couple days and i will take the head for ya.
do you have the valve cover for that?

$800 includes S52 head complete with valvetrain, cams, cam trays, 24 lifters, all caps and bolts, S52 valve cover, and I can throw in one of the M52 'BMW' covers as well. All you would need are new headbolts which are $12. If you intend on buying the head, I would prefer if you could leave me a deposit as there are several other parties interested as well. You can PM me for more information.

Wes

do the s52 cranks include the chain gear and hub on the end like pictured on the s50 one?

Yes, they are included. They were removed so I could pull the crank out of the block, but they will be included.

Wes

Cams are sold!

I will take the one of the OBD-2 plastic covers the one that is missing the cap pm me pay pal address and shipping total to 98125

how much for the s52 crankshaft? and how much for shipping to amman - jordan?

Crank is $500, not negotiable on international purchases. Shipping via UPS is 680.28 and DHL is 679.34 to Amman, Jordan.

Wes

Do you still have the s52 head minus the camshafts?

At the current time I do. There are several parties interested but none have committed yet.

Wes

Wouldnt happen to have any S52 heads laying around would you?

Wouldnt happen to have any S52 heads laying around would you?

PM reply sent. I have several S52 heads and an M50 non-vanos head. They are in various conditions, ranging in price from $350-500. Complete with cams, cam trays, valve train, and valve cover they start at $800. We would also consider selling our race head which is an S50 variant head, full flowbench porting with lower intake ports reshaped, high exhaust polish and porting mated to Supersprint headers, and it has been milled .0015". Head is making over 210whp on a bone stock 2.5L bottom end with M3 cams and valve train, no software. Once we get the car tuned to 7500rpms, we expect to see nearly 220whp. Downside is that it doesn't really like idling, starting, or easy driving.

Wes

Bump - Make offers. Everything has to go.

Wes

ygpm

pm offer sent for s52 crank

Yes, I got the PM. Unforunately I am not willing to take $330 for the crankshaft. Thanks for the offer though!

do you have a mass airflow sensor? mine just bit the dust, if you have it please PM me with how much you want for it!! TIA!!

Ah, we do not have an extra MAF. One of the few parts that we keep and use. Thanks though!

Wes

Still have the S52 Cams?

Edit: Sorry, missed the SOLD in an earlier post.

Hey I was wondering how much you would be willing to sell the cam carriers with lifter? Also what are the condition of the lifters and how have the been stored. I was also wondering if you know the length of the rods and how much for the pistons. Thanks for the help.

what the estimated cost for shipping the s50 crank to Malaysia using USPS? thanks

can we do any better on the s50 crank?

Sorry for the delay guys, have been pretty busy lately. S50 crank is sold! Still have S52 crank. I have different sets of rods, 135 and 140mm. (9) S52 135mm rods and (6) 140mm M50 Non-Vanos rods. Cam trays are in very good condition. Lifters have been stored in Mobil1 10W40 since the engine was dismantled. I never guarantee the condition of used lifters though; they are a as-is sale, no returns, no forum gripes, etc...

Wes

HI, do you still have the S52 pistons?

Cheers.

Sorry for the delay guys, have been pretty busy lately. S50 crank is sold! Still have S52 crank. I have different sets of rods, 135 and 140mm. (9) S52 135mm rods and (6) 140mm M50 Non-Vanos rods. Cam trays are in very good condition. Lifters have been stored in Mobil1 10W40 since the engine was dismantled. I never guarantee the condition of used lifters though; they are a as-is sale, no returns, no forum gripes, etc...

Wes

I understand. What kind of mileage on the cam trays and lifters? I am interested send me a PM with some pricing.

I'm interested in s52 pistons, rods, and crank

got any junk s52 heads??

I have a s52 head with damage to the front vanos. it only has 18k on it. all the valves and valve springs are fine. no cams but comes with the trays. it would be a good head for someone to rebuild theres with. not sure what its worth pm me if you are interested.

brandon

headers sold :)

I didnt see if anyone asked, but do you have an s52 block, or enough for a short block?

Do you have any coils for a 97 328i?

Sorry for the delay guys, have been pretty busy lately. S50 crank is sold! Still have S52 crank. I have different sets of rods, 135 and 140mm. (9) S52 135mm rods and (6) 140mm M50 Non-Vanos rods. Cam trays are in very good condition. Lifters have been stored in Mobil1 10W40 since the engine was dismantled. I never guarantee the condition of used lifters though; they are a as-is sale, no returns, no forum gripes, etc...

Wes

Hi Wes,

I'm in the market for a S52 crank, rods and pistons. Of course I would prefer the crank with the lower mileage! How much are you willing to let them go as a package? I assume all parts will be in good condition? Give me your absolute best price to save the hassle of haggling back and forth! :)

Can you please quote me for shipping to :
1. zip 06074, and
2. if you are willing to ship overseas - Kuala Lumpur, Malaysia (by sea, since it'll be cheaper... i hope!)

Sorry guys, I don't get notifications of topic replies for some reason, even though its selected that I do. Everything has been sold. All I have left are M60/M62 V8 stuff.

Wes

Do you stilll own it?