View Full Version : Refreshed S52 3.2L Long Block and other Goodies


Bill
11-05-2007, 02:25 PM
I pulled the plug on my track car project and been selling off the goodies.

Refreshed S52 3.2l
(less then a mile of test driving and 15minutes of running to bleed the cooling system)

New Parts List-
Vanos
BMW Composite Water Pump
Thermostat Housing & thermostat 80d
Pulleys
All Gaskets and Seals
Main and Cam Chains
All Guides
Chain Tensioners
All Bearings
Spark Plugs
Main and Rod bolts
Raceware 11mm Head Stud
Time-sert Block
Head Gasket
Tons of new hardware!

I am sure there is more, but thats just off the top of my head. The s52 cams, pistons, rods & crank have around 60k on them and were in great shape when the build was done.

Asking $4250.00 in longblock form
or
Asking $4500.00 w/S50 Intake Manifold, OBD1 Harness & Accessories



Other Goodies......
S54 Oil Filter Housing w/SS Lines and B&M Cooler $550.00
3.5 HFM $150.00
17lb Injectors (6) $50.00
21.5lb Injectors (6) $65.00
36lb Injectors (6) $200.00
RE Short Shifter $250.00
Remus Racing Headers $400.00
B&B Triflo Cat Back $350.00

luv4myE36
11-05-2007, 02:33 PM
hey bill...about the tri-flo
does it have the twin 3" tips?

adms1018
11-05-2007, 02:45 PM
How many miles are on the RE SSK?

DakarYM
11-05-2007, 04:11 PM
condition of the 17# injectors? clean, unknown, or dirty? i need mine at least cleaned, but can't have my car down that long to remove, clean and reinstall. looking for some good ones to swap in.

GTOKenny690
11-09-2007, 12:20 AM
Remus Racing Headers $400.00 Do you have a pic? Also can this be for street use? Thanks

Bill
11-09-2007, 10:25 AM
hey bill...about the tri-flo
does it have the twin 3" tips?

I have to measure but I think they are twin 2.25 or 2.5"

How many miles are on the RE SSK?
sold

condition of the 17# injectors? clean, unknown, or dirty? i need mine at least cleaned, but can't have my car down that long to remove, clean and reinstall. looking for some good ones to swap in.
These were off my stock S50 that I pulled with less then 60k on it. Let me know if you would like them.

Remus Racing Headers $400.00 Do you have a pic? Also can this be for street use? Thanks

I used them on the street. I will try an take pictures over the weekend since they are in storage now. Here is a thread about another set that was sold http://forums.bimmerforums.com/forum/showthread.php?t=648998&highlight=remus

mentaleeill
11-09-2007, 08:03 PM
36 lb injectors still avail? im in nj, and can possibly pick up.

eMMMotional
11-11-2007, 10:39 PM
$450 shipped for the S54 housing, lines, and cooler?

GG///M3
11-11-2007, 11:38 PM
bump for a good seller as we all know. How much for the tri-flo? Also Bill shoot me a pm. Thanks.

///M3///M5
11-12-2007, 12:21 AM
More info on the 21.5 injectors...

Bill
11-12-2007, 04:25 PM
36 lb injectors still avail? im in nj, and can possibly pick up.

There still available. Give me a call.

$450 shipped for the S54 housing, lines, and cooler?

PM Sent
bump for a good seller as we all know. How much for the tri-flo? Also Bill shoot me a pm. Thanks.
Thanks man. PM Sent

More info on the 21.5 injectors...
What do you need to know?

BSH
11-12-2007, 05:36 PM
Do you have the connecting pipes for the headers?

Bill
11-12-2007, 06:50 PM
yes i do :)

eMMMotional
11-12-2007, 10:25 PM
PM sent! Paypal ready and waiting on the S54 housing, cooler, and lines.

Consider it sold.
Damon

GTOKenny690
11-12-2007, 11:19 PM
Did you happen to get any pics of the Remus Racing Headers yet. Still interested in buying them!!! Let me know if you still have them. Thanks Kenny

93Coupe325is
11-13-2007, 11:39 AM
Still have the motor and accessories?

Bill
11-13-2007, 04:14 PM
Here is a shot of the motor & headers. The two down pipes that attach to the headers are included but I don't have pictures of those.

SaphyreKry
11-14-2007, 02:20 PM
Still have the S54 housing and cooler?

Is the 3.5 HFM for OBD I or II?

justaddcoffee
11-14-2007, 03:52 PM
are those hearders ceramic coated or that just high-temp paint? do you know if the interior diameter is larger than the factory headers or are they the same just better flowing by design?

luv4myE36
11-15-2007, 03:01 AM
bump for bill
sent you a pm about the exhaust
let me know

94calypsored
11-26-2007, 11:35 PM
:drool:

94calypsored
11-26-2007, 11:38 PM
:devillook must resist

Bill
12-10-2007, 01:52 PM
buy buy buy :)

M3Jokster
12-10-2007, 03:36 PM
buy buy buy :)


Lower Lower Lower Lower.....;)

then we buy buy buy buy :D