Selling off the bits I'd been saving for either an E36 325 or M3 that I was planning to build into a track car...but now am not (WTB E46 323 5spd manual). Details below....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. RRT big brake backing plates, brand new, never used. I bought them for use on a former race car but never installed them, then sold the car. Not sure if they would work with stock brakes or not, I don't think there is a fitment issue but they are specifically for big brake kits..$200/pair.
3. Stock m3 calipers front/rear with brackets. Fine shape, I think mileage is ~110k, don't recall but they are in great shape, includes new cal rebuild kits..$350/set, will not break them up.
4. Cometic MLS headgasket, new for use on US S50/52 engines, stock thickness..$150
5. Stock S50 cams from a LTW, ~28k miles, like new..$400/pair, will not separate
6. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
7. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
8. Delrin offset control arm bushings with the little carbon fiber plates/bolt set up to hold them together, mounted in and including the brackets....$100

Parts are OBO plus shipping from 48116.

Bump and update......

Selling off the bits I'd been saving for either an E36 325 or M3 that I was planning to build into a track car...but now am not. Details below....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. RRT big brake backing plates, brand new, never used. I bought them for use on a former race car but never installed them, then sold the car. Not sure if they would work with stock brakes or not, I don't think there is a fitment issue but they are specifically for big brake kits..$200/pair.
3. Stock m3 calipers front/rear with brackets. Fine shape, I think mileage is ~110k, don't recall but they are in great shape, includes new cal rebuild kits..$350/set, will not break them up.
4. Cometic MLS headgasket, new for use on US S50/52 engines, stock thickness..$SOLD
5. Stock S50 cams from a LTW, ~28k miles, like new..$400/pair, will not separate
6. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
7. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
8. Delrin offset control arm bushings with the little carbon fiber plates/bolt set up to hold them together, mounted in and including the brackets....$100

Parts are OBO plus shipping from 48116.

Help me out here - is all I need the calipers and brackets to switch to M3 brakes on my car? (obviously need rotors + pads)

Help me out here - is all I need the calipers and brackets to switch to M3 brakes on my car? (obviously need rotors + pads)

I believe you need the spindles as well, and if you buy those you may as well put new wheel bearings on them.

-Carlos.

Help me out here - is all I need the calipers and brackets to switch to M3 brakes on my car? (obviously need rotors + pads)

You need the M3 spindles (which I also have for sale, a new pair of Original BMW parts). Since the spindles are new they do not have wheel bearings. Cheers.

Edit: For the rear I think you also need the M trailing arms, I don't think the brakes bolt directly up to the non M brackets. I actually have a pair of those for sale too, just not listed. They are used but in good shape. However, I'd probably only worry about the front. The rear pads are the same for all E36's. Yes the M rotor is larger but the rear brakes are not as important until you start getting into bias.

Bump......plus some additional parts.....

Selling off the bits I'd been saving for either an E36 325 or M3 that I was planning to build into a track car...but now am not. Details below....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. RRT big brake backing plates, brand new, never used. I bought them for use on a former race car but never installed them, then sold the car. Not sure if they would work with stock brakes or not, I don't think there is a fitment issue but they are specifically for big brake kits..$200/pair.
3. Stock m3 calipers front/rear with brackets. Fine shape, I think mileage is ~110k, don't recall but they are in great shape, includes new cal rebuild kits..$350/set, will not break them up.
4. Cometic MLS headgasket, new for use on US S50/52 engines, stock thickness..$SOLD
5. Stock S50 cams from a LTW, ~28k miles, like new..$400/pair, will not separate
6. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
7. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
8. Delrin offset control arm bushings with the little carbon fiber plates/bolt set up to hold them together, mounted in and including the brackets....$100
9. Sparco hub adaptor for 6 bolt pattern aftermarket steering wheels (MOMO, Sparco, OMP, etc), brand new, complete.....$65
10. Hawk HT10 brake pads for stock E36 M3, MZ3 coupe/roadster, E46 M3 front calipers, brand new in box....$165
11. Hawk HT14 brake pads for stock E36 M3, MZ3 coupe/roadster, E46 M3 front calipers, brand new in box....$180

Parts are OBO plus shipping from 48116.

Can I get pics of #8 to todd_3@earthlink.net?

Thanks,
Todd

Can I get pics of #8 to todd_3@earthlink.net?

Thanks,
Todd

Posted below and sent. Cheers.

Bump......love to get rid of a bunch of this stuff this week, otherwise I guess it'll be ebay bound. Reasonable offers welcomed.

Selling off the bits I'd been saving for either an E36 325 or M3 that I was planning to build into a track car...but now am not. Details below....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. RRT big brake backing plates, brand new, never used. I bought them for use on a former race car but never installed them, then sold the car. Not sure if they would work with stock brakes or not, I don't think there is a fitment issue but they are specifically for big brake kits..$200/pair.
3. Stock m3 calipers front/rear with brackets. Fine shape, I think mileage is ~110k, don't recall but they are in great shape, includes new cal rebuild kits..$350/set, will not break them up.
4. Cometic MLS headgasket, new for use on US S50/52 engines, stock thickness..$SOLD
5. Stock S50 cams from a LTW, ~28k miles, like new..$400/pair, will not separate
6. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
7. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
8. Delrin offset control arm bushings with the little carbon fiber plates/bolt set up to hold them together, mounted in and including the brackets....$100
9. Sparco E36 hub adaptor for 6 bolt pattern aftermarket steering wheels (MOMO, Sparco, OMP, etc), brand new, complete.....$65
10. Hawk HT10 brake pads for stock E36 M3, MZ3 coupe/roadster, E46 M3 front calipers, brand new in box....$165
11. Hawk HT14 brake pads for stock E36 M3, MZ3 coupe/roadster, E46 M3 front calipers, brand new in box....$180

Parts are OBO plus shipping from 48116.

price on postage via USPS to Australia 3377 for #8 please

still waiting for a response?

still waiting for a response?


Sorry, I must have missed your post. Anyway those are sold. Thanks.

if you can do a really good deal on #7 shipped to Australia, 3377, I am interested

are the tranny/motor mounts still available?

are the tranny/motor mounts still available?

Yes they are.

Posting a pair of pics of the backing plates.....

bumpin' gruven.....

Bump, current list....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
3. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
4. TC Design finned diff cover for E36 cars. Has machined solid mounts (cannot install rubber mounts without maching these out first), brand new in packaging, $375 (also listed in another thread)

Parts are OBO plus shipping from 48116.

Pics of the motor/trans mounts and crossmember.

3 more pics of motor/trans mounts and crossmember.

Offers welcome.....bumping....


Bump, current list....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
3. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
4. TC Design finned diff cover for E36 cars. Has machined solid mounts (cannot install rubber mounts without maching these out first), brand new in packaging, $375 (also listed in another thread)

Parts are OBO plus shipping from 48116.

Are the cams sold?

Are the cams sold?

Yup, cams are sold. Here's the updated list of what is left....

1. Pair of '95 M3 spindles, brand new Original BMW parts, never used, capped for protection, spindles only - no wheel bearings...$350/pair, will not separate
2. E36 aluminum motor/trans mounts including trans cross member, I *believe* they are VAC as the trans bushings are one aluminum and one rubber but not sure, like new, barely used....$225
3. GC sperhical bearing offset control arm bushings, used but in good shape, bearings are tight, mounted in and including the brackets (fits E30 and E36)....$200
4. TC Design finned diff cover for E36 cars. Has machined solid mounts (cannot install rubber mounts without maching these out first), brand new in packaging, $375 SALE PENDING

Cheers.

can i see pics of #3

pm sent

pm sent

Replied!