.Tom.
11-04-2007, 07:33 PM
no longer for sale
|
View Full Version : FS:S50 motor $ shifted (san diego) .Tom. 11-04-2007, 07:33 PM no longer for sale thaye228 11-04-2007, 09:22 PM I will take the cams if you part out. ///M3 CRAZY 11-04-2007, 11:51 PM $700 shipped to nj? DTM Driven 11-05-2007, 12:30 AM s50 motor out of a 95 m3. 110K miles. money shiffted bad compression on cylinder #6. I dont know the extent of the damage, I bought the car like this and just swapped in another motor. complete long block, oilpan to valve cover, pretty much everything else was reused on my new motor. $1K obo if it dosnt sell complete within a week or two im willing to part it out:buttrock pm me if your interested. 500 picked up, does it have ecu or just motor .Tom. 11-05-2007, 02:02 AM no thanks to the offers posted .Tom. 11-05-2007, 06:13 PM bump jrtcbmw 11-05-2007, 07:35 PM willing to part with just the head, valves, springs and retainers?? ///M3 CRAZY 11-05-2007, 08:11 PM willing to part with just the head, valves, springs and retainers?? the head is first to go on a money shifted motor.... Zubehor 11-05-2007, 08:13 PM the head is first to go on a money shifted motor.... You mean the valvetrain, the head might be ok depending on how bad it was money shifted. jrtcbmw 11-05-2007, 08:36 PM the head is first to go on a money shifted motor.... so. there were no intentions of using it other then for testing and gather data, so i can build the head sitting in my garage. no point in destroying a perfectly good head for testing .Tom. 11-06-2007, 12:50 AM not alot of interest as a whole, ill probally start taking this thing apart this weekend. shoot me a pm with exactly what you want and how much you want to pay .Tom. 11-06-2007, 07:46 PM bump .Tom. 11-07-2007, 06:37 PM ttt ///M3 CRAZY 11-08-2007, 06:00 PM so. there were no intentions of using it other then for testing and gather data, so i can build the head sitting in my garage. no point in destroying a perfectly good head for testing i have noticed quite a few times that when the motor is over revved, the valve head pops off and rattles around in the cylinder just destroying the head in the domed area. but you can be lucky and only have bent valves. with the head still on the car it is a crap shoot. but if you need it for diagnostic or measuring purposes then it doesn't rally matter if that area is dead. jrtcbmw 11-08-2007, 06:28 PM i have noticed quite a few times that when the motor is over revved, the valve head pops off and rattles around in the cylinder just destroying the head in the domed area. but you can be lucky and only have bent valves. with the head still on the car it is a crap shoot. but if you need it for diagnostic or measuring purposes then it doesn't rally matter if that area is dead. yeah i know. thats why i was looking for "bad" head and not a good one. |