BMWE34M5
10-31-2007, 10:33 AM
Only $379
For all 6 Cylinder M50/M52 engines.
Please note: complete set includes manifold /adapter pipes / gaskets etc.! you have to cut off part of the pipes on the catalyst, and then weld the new adapter pipes on to the catalyst!
Schmiedmann sport manifolds are the best and most effective on the market, made of 100% stainless steel!
http://www.schmiedmann.com/ProductPictures/image_17503_big.jpg
BMWE34M5
10-31-2007, 11:10 AM
I'll check if it is available.
No love for the M52?
BMWE34M5
10-31-2007, 11:14 AM
I understand the M50 and M52 headers are the same-correct me if I'm wrong please.
dilat3d
10-31-2007, 12:14 PM
these would work on the s50/52 i'd assume?
also, are there the holes for the smog pump for us OBD2 guys?
BMWE34M5
10-31-2007, 12:21 PM
I'll check into it.
these would work on the s50/52 i'd assume?
also, are there the holes for the smog pump for us OBD2 guys?
luv4myE36
10-31-2007, 01:16 PM
how big on the collectors?
m3mobbin
10-31-2007, 01:30 PM
They are the same except for the secondary air pump holes, which can easily be drilled/machined into a the head/manifold flange.
I understand the M50 and M52 headers are the same-correct me if I'm wrong please.
BMWE34M5
10-31-2007, 01:50 PM
http://www.schmiedmann.com/ProductPictures/image_17822_big.jpg
http://www.schmiedmann.com/ProductPictures/image_17504_big.jpg
http://www.schmiedmann.com/ProductPictures/image_17505_big.jpg
BMWE34M5
10-31-2007, 02:03 PM
I don't believe they will work on the S50 and S52 motors.
these would work on the s50/52 i'd assume?
also, are there the holes for the smog pump for us OBD2 guys?
BMWE34M5
10-31-2007, 02:04 PM
What do you mean?
how big on the collectors?
luv4myE36
10-31-2007, 03:11 PM
the end of the pipe that connects to the midpipe
BMWE34M5
10-31-2007, 03:14 PM
I will try to find out
the end of the pipe that connects to the midpipe
BMWE34M5
11-01-2007, 04:49 PM
Just heard back-
There are holes for the lambda-sensor...... there's a bolt into the hole, and
you just take out the bolt.