SouthBend Clutches Group Buy 15% Off all BMW clutches!!!!! [Archive] - Bimmerforums

JordanMD88

10-29-2007, 05:27 PM

MDabney Approved this thread!!

Hey guys. I needed a new clutch for my turbo E36 I went with another Southbend Clutch.. These guys are great and have awsome Clutch Kits to Handel anywhere from 15 extra wheel horse power, to clutches that will hold over 800 wheel horse power for our turbo BMW's...
http://www.dxdracingclutches.com/images/DSCF1447.JPGhttp://www.dxdracingclutches.com/images/100_0976.gifhttp://www.dxdracingclutches.com/images/DSCF1446.JPG
They are offering a discount of 15% percent for the next two weeks for anyone that wants to buy a clutch from this BF.c Deal..

Look at their prices and subtract 15% so thier Stage 6 clutch is normaly $650 with the 15% discount it is $552.

Shipping is a flat rate of $25 anywhere in the US. International orders Please PM me for a shipping Quote.

After payment is recieved you will get a tracking number within 2 days... :)

Here is thier site.. Its flash so I cannot directly link you to the BMW clutch page.. But it's very easy to find.
http://www.dxdracingclutches.com/home.html

If anyone has any questions about fitment Or how to Purchase so you get the discount.. Please feel free to send me a PM

MRMARSH

10-29-2007, 05:31 PM

you know im down, pm or IM me the price shipped ya? and also still need to figure out if ill be goin with the puck style or not..lemme know dude

JordanMD88

10-29-2007, 05:36 PM

you know im down, pm or IM me the price shipped ya? and also still need to figure out if ill be goin with the puck style or not..lemme know dude

Your not on AIM :( I'm trying to keep my PM box empty

kingsiang

10-29-2007, 07:26 PM

weird, they only have street series for 95 m3? also anyone know if these will fit the uuc stage 2 8.5lb flywheel? thanks.

JordanMD88

10-29-2007, 07:41 PM

weird, they only have street series for 95 m3? also anyone know if these will fit the uuc stage 2 8.5lb flywheel? thanks.

This is the E34 M5 style flywheel isn't it?
right now they really only have E36 Based Pressure plates..

I'm sure the other clutchs will fit the 95 transmisions Input shaft.. that isn't the problem It's the Pressure Plate. I think the 95's pressure plate is different than the 96-99.

m3mobbin

10-29-2007, 09:04 PM

Ichbinsobose

10-29-2007, 09:05 PM

recommend a clutch for a 95 525i with 500whp?

JordanMD88

10-29-2007, 09:21 PM

I'm definitely in on this GB, I can't decide which clutch I should get though. The motor is a built S52 estimated whp is probably 280, it will be street driven so it only needs to be a HD series pressure plate. Do you think I should go with a Ralley, TZ, or OFE. I really don't want something that will glaze over like SPEC clutches are known to do. Anyone have any experience with Southbend clutches?

Another thing is that I will be installing the clutch with a new Fidanza flywheel, anything I should know about installation that would be different than a stock S52 flywheel?

I would Use Either the TZ Stage 2 Trq. Capacity of 325 ($344 Shipped) Or the Rally Stage 1 Trq. Capacity of 300 ($301 shipped)

Nothing would be very different with using a Ltw Flywheel other than a stock on, But you do need to note that you are using a single mass flywheel so we send you a spung hub clutch..

Also : These are far better than SPEC clutches These are Hand Made here in the U.S.A not in china... I've used these clutches on other cars with no problems...

JordanMD88

10-29-2007, 09:28 PM

recommend a clutch for a 95 525i with 500whp?

Well What Flywheel do you have on the Car? I assume It is a M50 based motor?

With that said..

You should Probably switch to a M3 flywheel so you can have a larger surface area for your clutch...

I would use the OFE Stage 5 Good for 525 Torque. ($514 shipped)

Or if you think you will make more than 525 Tq.
You could use the FE Stage 6 Good for 660 Torque ($578 shipped)

Bimmerforums

10-30-2007, 12:54 AM

I sent the OP a PM.

This could not have come at a better time! I was seriously just about to purchase the Sachs clutch kit!

JordanMD88

10-30-2007, 07:47 AM

I sent the OP a PM.

This could not have come at a better time! I was seriously just about to purchase the Sachs clutch kit!

PM returned :) I'm going to work :) see you guys after 3 EST...

///M3Turbo

10-30-2007, 09:49 AM

Great timing. I've in the market for a new clutch kit. What would you recommend for 97 M3 with TT Stage 2 turbo kit? I'm thinking their FE Series
Stage 6 would be fine for me. I current have the UUC UltraSmooth with their UUC LTW flywheel. I will be going back to OEM Dualmass flywheel hence why I will be replacing my clutch kit.

Everytime I try press "add to cart" it trys to login to Paypal??? Is that what it's suppose to do?

JordanMD88

10-30-2007, 04:53 PM

fivaxis

10-30-2007, 05:15 PM

I just put an FE in, so far great clutch. One thing though when I ordered it he said the website prices were wrong and I ended up getting a lower price.

JordanMD88

10-30-2007, 05:28 PM

I just put an FE in, so far great clutch. One thing though when I ordered it he said the website prices were wrong and I ended up getting a lower price.

They are just trying to get the name out to the BMW E36/E46 community... :)

Wurzig-Drei

10-30-2007, 05:50 PM

Looking for a clutch kit for a 92 e36. I plan on adding on a turbo later in life. What is a good kit for around 300 whp?

JordanMD88

10-30-2007, 06:03 PM

Looking for a clutch kit for a 92 e36. I plan on adding on a turbo later in life. What is a good kit for around 300 whp?

I'm guessing you have a 325is... The TZ series clutch For the E36 325 will hold alittle over 300 Trq...
It will be $322 shipped...

dustent

10-30-2007, 07:02 PM

Great timing. I've in the market for a new clutch kit. What would you recommend for 97 M3 with TT Stage 2 turbo kit? I'm thinking their FE Series

Same here, I need a clutch for a '99 m3 with a TT Stage 2 turbo kit. 400-450 hp. What do you recommend?

Thanks!

JordanMD88

10-30-2007, 07:45 PM

Same here, I need a clutch for a '99 m3 with a TT Stage 2 turbo kit. 400-450 hp. What do you recommend?

Thanks!

I recommend the Stage 5 OFE

Or if you think your going to go bigger power wise down the road.. get the Stage 6 FE

PM sent

M3Jokster

10-30-2007, 07:50 PM

what do u recommend?

3.2L SC M3 380-415 RWHP...300 tq

kobe 8

10-30-2007, 07:54 PM

what do u recommend?

3.2L SC M3 380-415 RWHP...300 tq

who's car you gonna put in with that hp :confused

JordanMD88

10-30-2007, 08:15 PM

what do u recommend?

3.2L SC M3 380-415 RWHP...300 tq

The TZ Stage 4 is good for 475 trq. It is $446 shipped

The step below that clutch is the OFE Stage 3 which is good for 395 Trq. $361 shipped..

I recomended these clutches that are rated slightly higher because People with Fi applications usually Race their cars.. Either on the Street :( or @ the track..

///M3Turbo

10-30-2007, 08:29 PM

Paypal sent... :)

Thanks for answering all my questions.

JordanMD88

10-30-2007, 08:34 PM

Paypal sent... :)

Thanks for answering all my questions.

Anytime.. I will have a tracking # for you as soon as UPS picks it up...

rt turbo

10-30-2007, 08:36 PM

holy cow! my prayers answered! i will be putting money in my paypal today and paying once it shows.

JordanMD88

10-30-2007, 08:40 PM

holy cow! my prayers answered! i will be putting money in my paypal today and paying once it shows.

For what lol... Please let me know what you plan on ordering..

Zippylock

10-30-2007, 08:45 PM

JordanMD88

10-30-2007, 09:00 PM

hey man, my clutch is going for sure, so im thinking of getting in on this GB!

couple q's
these are better/stronger then the sachs clutches? (what i have now w/ 140K, lol) and will hold more power...

also, im not sure, what im making for power, but i pull very hard and keep up with stock M3 for a possible idea... my mods are in my sig...
... with that, which clutch do you recommend for me?? and how much??

let me know asap please!

These clutchs are built using Sacs componets :) They remake the clutch disks with better linings.. And the pressure plates are re-sprung for more clampload. (this is what every other clutch manufacturer does but will not tell you)

I will recomend the Rally Series"stage 1) clutch for you.. $259 shipped
But if you are going to add nitrous before you change your clutch again, I would go for the TZ series clutch "stage 2" $344 shipped

Bimmerforums

10-30-2007, 09:45 PM

Just placed an order with Jordan and received amazing customer service!

Thanks for hosting this GB man! :redspot:

M3Jokster

10-30-2007, 09:51 PM

who's car you gonna put in with that hp :confused

what do u think...mine...

as for you..i say stick to the stock...better yet...stick to the 3-series 318 clutch...

JordanMD88

10-30-2007, 10:01 PM

Just placed an order with Jordan and received amazing customer service!

Thanks for hosting this GB man! :redspot:

Thank Bimmer Fourms and MDabney for letting this GB happen :)

LeMansGTS

10-31-2007, 02:26 AM

oh man, i am a little too late...

JordanMD88

10-31-2007, 07:51 AM

oh man, i am a little too late...

did you just buy a clutch? :(

kingsiang

10-31-2007, 11:41 AM

This is the E34 M5 style flywheel isn't it?
right now they really only have E36 Based Pressure plates..

I'm sure the other clutchs will fit the 95 transmisions Input shaft.. that isn't the problem It's the Pressure Plate. I think the 95's pressure plate is different than the 96-99.

i dont quite understand what u mean by e34 m5 style flywheel, as far as i know the flywheel is e36 flywheel and the pressure plate and throwout bearing is from e34 m5.

this is what i have now. http://www.uucmotorwerks.com/flywheel/LFWLE36SH.htm

what clutch do u have that will hold ~400-450ftlb of torque. thanks.

for a 95 3.0 m3 with uuc lwfw

SiGmA

10-31-2007, 02:18 PM

Just a note, here's a direct link: http://www.dxdracingclutches.com/bmw.html

Looks like a pretty good deal!

JordanMD88

10-31-2007, 03:58 PM

i dont quite understand what u mean by e34 m5 style flywheel, as far as i know the flywheel is e36 flywheel and the pressure plate and throwout bearing is from e34 m5.

this is what i have now. http://www.uucmotorwerks.com/flywheel/LFWLE36SH.htm

what clutch do u have that will hold ~400-450ftlb of torque. thanks.

for a 95 3.0 m3 with uuc lwfw

Yes the flywheel is drilled to fit a e36. The clutch disk can fit an E36. But the pressure plate Is for a E34 M5. Southbend does not carry a E34 M5 pressure plate.. It maybe special order.. I have asked and they are looking into it.. but your best bet is to swtich back to a E36 M3 flywheel...

kingsiang

10-31-2007, 08:16 PM

bummer... well lucky thing is i still have my stock flywheel.

JordanMD88

10-31-2007, 08:58 PM

bummer... well lucky thing is i still have my stock flywheel.

Just let me know if you would like one.. M3 Pressure plates are running low... then a 6 week back order...

///M3Turbo

10-31-2007, 10:45 PM

Awsome service! Looks like I'll be getting my clutch delivered this Friday. Time to get my car back on the road before snow actually has a chance to fall. :)

Bimmerforums

10-31-2007, 11:56 PM

I placed the order last night and the clutch is being delivered tomorrow!!

I highly recommend Jordan for your clutch needs :redspot

CVGTURBO86

11-01-2007, 02:06 AM

How much HP will the OFE stage 3 handle? I think I will be fine with my setup, just want a second opinion. Also, $395 is for the whole kit sans flywheel? If so that is nuts.

I'm in for sure.

Bimmerforums

11-01-2007, 04:12 AM

How much HP will the OFE stage 3 handle? I think I will be fine with my setup, just want a second opinion. Also, $395 is for the whole kit sans flywheel? If so that is nuts.

I'm in for sure.
Actually it'll be $361 shipped with the 15% discount ;)

Clutch kits are based on the torque capacity so if you have a S/C the Stage 3 should be more than enough..

CVGTURBO86

11-01-2007, 06:49 AM

Actually it'll be $361 shipped with the 15% discount ;)

Clutch kits are based on the torque capacity so if you have a S/C the Stage 3 should be more than enough..
Thanks for the clarification! I am building a turbo setup. Around 425rwhp and I would not think any more than about 360 rwtq....this should be fine, i think...

JordanMD88

11-01-2007, 07:56 AM

How much HP will the OFE stage 3 handle? I think I will be fine with my setup, just want a second opinion. Also, $395 is for the whole kit sans flywheel? If so that is nuts.

I'm in for sure.

Which car is this going in M3?
I would Recomend the TZ stage 4 $446 shipped.. If you are going turbo with 425whp. It's always good to have alittle room..

M3Jokster

11-01-2007, 11:24 AM

typically...

how many miles could you get out of your clutch....I know it depends on how you drive your car...drags, auto-x, tracking etc...

If it's made to do all these things...how many miles...

example.. my stock clutch is going on....35k-40k miles.....I have no issues...

I drag and track my car....

JordanMD88

11-01-2007, 03:13 PM

Mechanic69

11-01-2007, 08:19 PM

Just ordered the stage 4 kit, $446 shipped, Jordan is the man, thank you

Dispatch20

11-01-2007, 08:36 PM

JordanMD88

11-01-2007, 08:52 PM

Can you post some information on who this company is? Why these clutches are a good deal? And are these clutch kits really popular in certain markets (like LS1, or Supra, etc). Just something to convince us that they aren't junk.

There clutches look pretty nice, but the website is a little unprofessional. A clutch is something you don't want to fail prematurely. I have a hard time trusting a company I've never heard of.

Well They are a 3 generation company. They have done millions of clutches for High Hp and Torque diesel trucks, and tractor pull clutches they also make 1000's of industrial clutches. Then the started building "import" clutches..

Everyone who I know that have used these clutches, have been very satisfied.They have held high horsepower and torque for me on different supra setups i've owned in the past.. I used a custom setup from them for my Pro-Turbo 4 Drag Honda, no problems out of one clutch for an entire season :)

They Use OE SACS Pressure plates and clutch disks.. They just re-line the clutch disks with better friction material, and the Pressure plates are resprung for a Higher clamp load..

There area a few other Members here on BF.c that have used thier clutches with no problems what so ever...

Southbend Clutchs Also Has a great Warranty on such a high wear part.

South Bend Clutch, Inc. warrants that our Clutches are free from defects in workmanship and material under normal use and service. The obligation of South Bend Clutch, Inc. under this warranty is limited to repair or replacement of the defective products, which fails within 12 months or 12,000 miles (whichever comes first) after sale (invoice date) South Bend Clutch, Inc. inspection shall disclose to its satisfaction that the Clutch is defective. Buyer must not return the defective parts without the consent of the seller. South Bend Clutch, Inc. shall not be liable for any special, direct, indirect, incidental or consequential damages, including, but not limited to, claims for delay, loss of profits, or for labor. No express warranties and no implied warranties either of merchantability or fitness for any particular use or purpose or otherwise, other than that expressly set forth above which are made expressly in lieu of all other warranties, shall apply to clutch products sold by South Bend Clutch, Inc.

The Limited Warranty will not be valid under the following express conditions:
When Flywheel was not replaced or resurfaced to specification.
Clutches which have been altered, improperly installed, or damaged by accident, negligence or misuse.
Burned Clutches.
PRODUCTS USED FOR HIGH PERFORMANCE AND/OR RACING PURPOSES WHICH WERE NOT DESIGNED ESPECIALLY FOR HIGH PERFORMANCE

JordanMD88

11-01-2007, 08:53 PM

I just put an FE in, so far great clutch.

:lol

bimmer4ever

11-02-2007, 12:03 AM

No love for E34 M5 flywheel:(

M3Jokster

11-02-2007, 01:38 AM

jordan...do you know of any place that could re-surface a dual mass flywheel?

Bimmerforums

11-02-2007, 02:24 AM

typically...

how many miles could you get out of your clutch....I know it depends on how you drive your car...drags, auto-x, tracking etc...

I got 113k miles out of my stock clutch and have taken it to the drag a few times as well as auto-x.

Can you post some information on who this company is? Why these clutches are a good deal? And are these clutch kits really popular in certain markets (like LS1, or Supra, etc). Just something to convince us that they aren't junk.

There clutches look pretty nice, but the website is a little unprofessional. A clutch is something you don't want to fail prematurely. I have a hard time trusting a company I've never heard of.

I've only received positive feedback from people who have used their clutch also. My friend with a stage 3+ s4 (+400ftlb) is very satisfied with his setup.

Bimmerforums

11-02-2007, 02:25 AM

BTW I ordered my clutch kit today and can't wait to install it :buttrock

Only problem is that they recommend a 750mile break in period :(

JordanMD88

11-02-2007, 07:09 AM

jordan...do you know of any place that could re-surface a dual mass flywheel?

Most cities have a clutch specialist... But southbend recomends you not turn your flywheel on a lathe like a brake rotor. they recomend you grind it smooth with a scotchbrite disk.. "roloc" disks by 3M napa has them...

Mechanic69

11-02-2007, 01:14 PM

Only problem is that they recommend a 750mile break in period :(

Is this true?

Most cities have a clutch specialist... But southbend recomends you not turn your flywheel on a lathe like a brake rotor. they recomend you grind it smooth with a scotchbrite disk.. "roloc" disks by 3M napa has them...

That is good to know, saves me a day of down time. I might be able to do it in one day. Any specific grit roloc disk?

JordanMD88

11-02-2007, 01:45 PM

Is this true?

That is good to know, saves me a day of down time. I might be able to do it in one day. Any specific grit roloc disk?

750 to be safe... for all the people that do no know what they are doing, 200-300 miles of easy driving will be ok..

I use the red disks and finish with the blue and check it with a strait edge...

JordanMD88

11-03-2007, 08:27 AM

ALL PM's replied too

///M3Turbo

11-03-2007, 10:44 AM

Clutch kit showed up yesterday...should be going in today!!! Disk looks nice and so does the PP.

Thanks JordanMD88!!!

JordanMD88

11-03-2007, 03:46 PM

Just installed MY Stage 6 for the M3 flywheel. Took it for a drive.. Drive like Stock :) Almost, It was alittle grabby but I think it is just right for a High power turbo car...

tudragan

11-03-2007, 06:02 PM

what do you recommend for my 328?

JordanMD88

11-03-2007, 07:25 PM

what do you recommend for my 328?

well.. the Rally series clutch should be fine for you, $258 shipped...

daerider

11-03-2007, 07:42 PM

I have a 95 M3 that puts out about 225 RWHP. The car is only street driven to and from auto-x and track events and that may change in the near future to a track/auto-x only car. I plan on upgrading to a Stage I SC kit next which will give approx 300 RWHP. Which clutch would you recommend for this type of driving and HP. I would prefer a clutch that I can be very hard on at the race track without having to worry about destroying it. Also, I am installing a JB Racing LTW

Thanks,
Damon

JordanMD88

11-03-2007, 07:48 PM

JordanMD88

11-04-2007, 09:47 AM

Replied to all pm's recieved

///M3Turbo

11-04-2007, 09:31 PM

Finished up today and took the car for a quick spin, nothing crazy. My first impression is "WOW". I really like this clutch setup better then my UUC Cerametallic setup. The clutch feels so close to stock. I highly recommend this clutch kit to who ever is looking.

JordanMD88

11-05-2007, 12:03 AM

Dispatch20

11-05-2007, 07:41 AM

JordanMD88

11-05-2007, 08:06 AM

Which clutch did you buy to run with your TT S2?

He purchased the FE stage 6 for an M3

JordanMD88

11-05-2007, 07:12 PM

Replied to all PM's I'm around so if anyone has any questions I will have answers

JordanMD88

11-06-2007, 06:29 PM

Orders from this weekend should go out tomorrow :)

MRMARSH

11-06-2007, 06:31 PM

thanks for helping me out with such a great deal!!

Mechanic69

11-07-2007, 02:45 PM

Orders from this weekend should go out tomorrow :)

Have all the orders gone out?

JordanMD88

11-07-2007, 06:18 PM

Have all the orders gone out?

Yes your actually left on the 2nd and should be there tomorrow...
Sorry about the confusion Avi.. I thought you were somone else :( Damons clutch shipped today. I feel so stupid lol

JordanMD88

11-07-2007, 06:18 PM

Have all the orders gone out?
1Z 447 204 42 5656 613 6

UPS

Mechanic69

11-07-2007, 07:25 PM

Yes your actually left on the 2nd and should be there tomorrow...
Sorry about the confusion Avi.. I thought you were somone else :( Damons clutch shipped today. I feel so stupid lol

No problem, thank you for all your help, can't wait to put it in.

GodFather

11-08-2007, 02:13 AM

Yea, with a good name, someone needed to bring SouthBend Clutch out here... ;)

Great guys!!!
Andy is the shiznit!!!!

Stan

JordanMD88

11-08-2007, 08:34 AM

Yea, with a good name, someone needed to bring SouthBend Clutch out here... ;)

Great guys!!!
Andy is the shiznit!!!!

Stan

Yes, Southbend is here

CVGTURBO86

11-08-2007, 03:38 PM

Money sent. :)

JordanMD88

11-08-2007, 06:42 PM

Money sent. :)

Clutch is sent... :)

M3Jokster

11-08-2007, 07:45 PM

paypal sent...thanks..

JordanMD88

11-08-2007, 08:00 PM

paypal sent...thanks..

Will be shipping out tomorrow :)
Thanks again Hung...

JordanMD88

11-09-2007, 08:26 AM

Hurry This deal is almost up..

JordanMD88

11-09-2007, 06:03 PM

All Pm's answered.. and all clutchs have been shipped...

M3Jokster

11-09-2007, 07:09 PM

Will be shipping out tomorrow :)
Thanks again Hung...

PM me the tracking number...need to intercept the package before the stock boy gets to it...ahhahaha

JordanMD88

11-09-2007, 08:41 PM

PM me the tracking number...need to intercept the package before the stock boy gets to it...ahhahaha

Check your PMs Mr. :)

Bimmerforums

11-09-2007, 08:42 PM

Guys I finally got to drive with the South Bend clutch and WOW. Granted I only got the stage 1 clutch but the quality, customer service, and pedal feel is awesome.

:wave

M3Jokster

11-09-2007, 09:04 PM

Guys I finally got to drive with the South Bend clutch and WOW. Granted I only got the stage 1 clutch but the quality, customer service, and pedal feel is awesome.

:wave

did u install it with a ltw or OEM flywheel?

JordanMD88

11-11-2007, 10:10 AM

Almost out of time guys....

Bimmerforums

11-11-2007, 01:54 PM

did u install it with a ltw or OEM flywheel?

Didn't replace my flywheel so OEM.

JordanMD88

11-12-2007, 09:24 AM

Bump Bump, Last day guys :)

JordanMD88

11-12-2007, 10:18 PM

OK deal Is OVER

Thank BF.c Admin for letting this Group buy happen

CVGTURBO86

11-13-2007, 03:09 AM

Received my stage 4 today, looks quality! I am Installing it tomorrow. Thanks for the Deal, Jordan.

JordanMD88

11-13-2007, 10:45 AM

Received my stage 4 today, looks quality! I am Installing it tomorrow. Thanks for the Deal, Jordan. 

sweet man. Let me know how it goes... YOu need to come hang out with the rest of the BWMCCA in atlanta, I've never met you have i?

zire61

11-13-2007, 05:53 PM

money sent yesterday. did u receive it along with my PM?

JordanMD88

11-14-2007, 09:57 AM

yes i did, they are making it right now should ship today or tomorrow..
You will get a email with tracking as soon as it is done

zire61

11-15-2007, 11:13 AM

yes i did, they are making it right now should ship today or tomorrow..
You will get a email with tracking as soon as it is done

thanks for the hard work jordan. :)

M3Jokster

11-15-2007, 09:31 PM

Received my clutch kit today...thanks Jordan!

JordanMD88

11-15-2007, 09:51 PM

Everyone Needs to Spread the word on how great these clutches are.. And how streetable they are also...

Southbend will be a vendor on here Very soon :)

Be glad you got in now. Prices are going up about 15% this upcoming Quarter.

Maybe another GB this spring not sure yet?

zire61

11-16-2007, 04:39 PM

how long more before mine ships out?

///M3Turbo

11-16-2007, 04:56 PM

350 miles on the Stage 6 clutch and I'm lovin' it!!! Feels so smooth... :)

Bimmerforums

11-16-2007, 10:05 PM

300 miles on mine so far and I love it!! :redspot

Dispatch20

11-17-2007, 11:27 AM

I have a feeling I'm going to regret not snagging one of these clutches.

JordanMD88

11-18-2007, 04:34 PM

how long more before mine ships out?

shipped last week USPS does not give tracking numbers for international shipping, you should see it this week :)

zire61

11-19-2007, 05:19 AM

shipped last week USPS does not give tracking numbers for international shipping, you should see it this week :)

thanks jordan, was getting worried that my order had been forgotten. can't wait.. :alright

M3Jokster

11-19-2007, 05:09 PM

guys,

if you're running a LTW flywheel...which one are u guys using with the clutch kit?

JordanMD88

11-19-2007, 05:51 PM

guys,

if you're running a LTW flywheel...which one are u guys using with the clutch kit?

FYI Southbend can Make sprung hub clutches for LTW flywheels.. So no Chatter :)

M3Jokster

11-19-2007, 06:00 PM

didn't the stage 4 has a spring hub? I haven't open my box yet.

widebody_bimmer

11-19-2007, 10:41 PM

how much for stage 3 clutch for 95' M3 3.0L shipped to 95124? I try to add it to cart but it says 525 bucks so I think the link is for the wrong one on their site.

JordanMD88

11-19-2007, 11:12 PM

how much for stage 3 clutch for 95' M3 3.0L shipped to 95124? I try to add it to cart but it says 525 bucks so I think the link is for the wrong one on their site.

PM sent sorry about the screw up on the site..

JordanMD88

11-21-2007, 07:03 PM

How are everyones clutchs doing?

M3Jokster

11-21-2007, 10:11 PM

still in the box.....need to find an OEM flywheel.

MRMARSH

11-22-2007, 03:54 AM

got mine last week, anything in specfic for break in?

Alpha ///

11-22-2007, 04:25 PM

how much for an OEM clutch kit for an e30?!!!!

Jeremy

zire61

11-28-2007, 09:55 AM

shipped last week USPS does not give tracking numbers for international shipping, you should see it this week :)

hi jordan,

i have yet to receive my clutch, although more than 10 days have passed since you said the article was sent.

also, i've checked the usps website and it seems they do provide tracking for international shipping. could you check with your southbend contact to find out what's going on? i've emailed them but got no reply.

thanks

Jean-Claude

11-28-2007, 10:35 PM

I got my clutch 3 business days after ordering from SouthBend. They are good about shipping out quickly. Maybe something fell through the cracks?

JordanMD88

11-28-2007, 11:02 PM

I got my clutch 3 business days after ordering from SouthBend. They are good about shipping out quickly. Maybe something fell through the cracks?

Yes he is in singapore.. It shipped the day after he ordered it.. It has been almost 2 weeks.. but we all know how Overseas USPS is..

JC how is your clutch... Have you installed it yet..

Bimmerforums

11-29-2007, 03:35 AM

I've put 600 miles on my clutch and I absolutely LOVE it! Even though I only went with a Stage 1 I'm really happy with the pedal feel. I'm a newb but it does feel like there's more clamping force but thats probably just in my head.

JordanMD88

11-30-2007, 06:48 PM

Nice to hear.. Anymore feedback... Have any of the High HP guys put thiers to use, besides myself..?

M3Jokster

11-30-2007, 07:28 PM

not yet...still looking for an OEM flywheel...

JordanMD88

12-02-2007, 11:19 PM

not yet...still looking for an OEM flywheel...

:(

BuzzLtYr

12-03-2007, 03:22 PM

do you happen to just sell the pressure plate alone? i already have a disc and bearing? need it for an 96 m3.

JordanMD88

12-03-2007, 08:51 PM

Southbend Only offers Kits.

Because the Clutch disks are matched with Specific spring rate Presssure plates, and visa versa..

BuzzLtYr

12-03-2007, 10:18 PM

thanks anyways, free bump from me for a great looking product

zire61

12-04-2007, 05:49 AM

Yes he is in singapore.. It shipped the day after he ordered it.. It has been almost 2 weeks.. but we all know how Overseas USPS is..

if this is true, USPS must be absolute rubbish. 3 weeks since payment and i haven't received my clutch yet.

///M3Turbo

12-04-2007, 10:52 AM

if this is true, USPS must be absolute rubbish. 3 weeks since payment and i haven't received my clutch yet.

One time I order some car parts, it ended up that the products were being shipped from Canada. Once the package was handed off to USPS I was no longer able to track the package. After a few weeks and no product ended up calling the vender and I canceled the transaction. About a month later, I get a package and it turns out to be the parts I ordered.

M3Jokster

12-04-2007, 01:21 PM

if this is true, USPS must be absolute rubbish. 3 weeks since payment and i haven't received my clutch yet.

It could take a up to a Month!

i know..i sent a package to a friend of mine in china....

Anonymatt

12-05-2007, 08:57 PM

Is the 15% off over?

JordanMD88

12-07-2007, 07:55 PM

Is the 15% off over?

Way Over... :( Look around In the spring...

JordanMD88

12-11-2007, 05:13 PM

if this is true, USPS must be absolute rubbish. 3 weeks since payment and i haven't received my clutch yet.

Has your clutch arrived yet?

JordanMD88

12-15-2007, 11:44 AM

How is everyone's clutch doing?

zire61

12-19-2007, 01:58 PM

Has your clutch arrived yet?

no jordan, in fact, the clutch didn't ship out the day after i paid, like you told me.

according to the usps website, it was shipped out on the 10th of december, one full month after payment, so i've no idea how you managed to get hold of that particular receipt/tracking number that u sent me.

i had to cancel my attendance at a track day meet because of the missing clutch. not pleased at all.

JordanMD88

12-25-2007, 09:16 PM

no jordan, in fact, the clutch didn't ship out the day after i paid, like you told me.

according to the usps website, it was shipped out on the 10th of december, one full month after payment, so i've no idea how you managed to get hold of that particular receipt/tracking number that u sent me.

i had to cancel my attendance at a track day meet because of the missing clutch. not pleased at all.

Not sure what you mean.. Maybe that is when it left the States.. I know the tracking Number I gave you was correct.. But Shipping overseas is always tough especially when your countries customs are very strict.. But I am sorry the shipping was less than satisfactory.. You should take it up with USPS.. We did all that we could..

zire61

12-31-2007, 11:25 PM

Not sure what you mean.. Maybe that is when it left the States.. I know the tracking Number I gave you was correct.. But Shipping overseas is always tough especially when your countries customs are very strict.. But I am sorry the shipping was less than satisfactory.. You should take it up with USPS.. We did all that we could..

Jordan,

amazingly arrogant reply there. here's my response:

1) i've finally received my clutch.
2) the tracking number you provided was just plain wrong as the clutch hadn't even been sent out at that point in time.
3) i have email correspondence with Jon from Southbend stating that the clutch was not sent out on the date you said it was due to delay in getting hold of some of the parts needed.

i can and will post that email here for all to see if need be, with Jon's permission of course.

i've received my clutch and that's the most important bit. i have no quarrel with either USPS or Southbend, Jon was pretty honest in admitting the late shipment and the reason for it. If anyone wants a southbend clutch, i would recommend just dealing direct with them.

pictures speak louder than words though. pay close notice to the box labeled "date accepted" and the tracking number located on the bottom right of the picture. feel free to enter that tracking number and see for yourself.

http://photos.e46fanatics.com/data/500/01012008935.jpg