i checked the fuses and i just put the bulbs in like 2 months ago. both the right and the left just stopped working. wtf? any suggestions?

Continuity check? with volt meter

your high beams working?

your high beams working?

i was gonna ask that, but figured he would have tried them just cause. but whats the reason they are on the same circuit?

High beams cut off the fogs when in use......You can bypass this if you want

yea the high beams are working. i remembered that i had the high beams on for a long time one night. could that have cause the fogs to go out?
they stil dont work. and i dont feel like checking the whole wiring system for bad connection or whatever. so any more suggestions?

i checked the fuses and i just put the bulbs in like 2 months ago. both the right and the left just stopped working. wtf? any suggestions?

I just noticed today that my drivers side fog light is out. About 2 weeks ago, I got a crack in the lens of my passengers side fog light, but they were both still working when I checked at that time. But today I see that the drivers side is out. I put in brand new bulbs on 9/08/07 so a little over 2 months ago. Any suggestions as to what it could be?:help

I'm having a problem as well with my passenger side fog light. I replaced both units due to broken lenses,all was fine after replacing with used units. About a week ago i noticed my passenger side wasn't working. I have power to the light and have used bulbs i know to be good to check if bulb was bad, i even checked for power by checking the inside of foglight to see if maybe i wasn't getting good contact at the base of the bulb; it shows power. What could this be???

Are you getting power to the connector ? 12Volts.This is a very easy system.If you have 12 volts coming out of your plug then its in the fog light housing.If not its a fuse or wiring issue.Start eliminating problems

I have checked power via test light and have power at connector(s) and inside foglight . Fuses were okay too. Will have to figure it's inside foglight housing. Reeeally strange.:confused
Are you getting power to the connector ? 12Volts.This is a very easy system.If you have 12 volts coming out of your plug then its in the fog light housing.If not its a fuse or wiring issue.Start eliminating problems

Are the 2 wires inside the cap in good shape?Thats really the only thing I could think of at this point if the bulb is good

I'm having the same problem.
My drivers side fog light isn't working, I took it apart and there was water in the housing.
I put in a new bulb and nothing.

maybe a short? are the fuses messed up?