!!SOLD!!

Hey guys,

I am selling a SDS Engine Management System for the BMW m10 motor. This was tuned for a turbo application but will work for non-turbos too. The following will be included in the system:

-Trigger wheel sensor bracket
-Custom Pulley
-Complete Harness
-MSD CoilPack
-Coil Wires
-ECU
-Hand held Programmer
-GM Map Sensor

Pretty much the only thing you would need are:
-Injectors
-GM coolant temp sensor
-GM air temp sensor
-Bosch Narrow Band 02 Sensor (1 wire)
-TPS

This is a complete plug and play and requires only a few wires to hook up:
-12V
-GND
-TACH (for your dash)
-02 Sensor

I would really want this to go to another m10 since over 100 hrs of dyno tuning has already been done to the ECU. It has awesome drivability and starts right up on the coldest of temperature.

I am only asking $800+ shipping for this setup. Let me know if you guys have any questions.

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01301.jpg

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01303.jpg

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01304.jpg

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01308.jpg

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01306.jpg

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01219.jpg

http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/SDS%20Engine%20Management/DSC01312.jpg

:(

:(

why are you whining?

why are you whining?

Because I have been bugging this guy for his kit for nearly 2 years. And then when its for sale Europe straight cleaned me out. I was really looking forward to having this system.

Because I have been bugging this guy for his kit for nearly 2 years. And then when its for sale Europe straight cleaned me out. I was really looking forward to having this system.

Big baller like you should be replenishing europe money in a matter of days. Just pound the streets homie... dollar bills always rise to the surface.

Send me pictures PLEASE!!!!! I am very interested.

Added Pics!

Can you send them to my email address as attachments? I can't see them here for some reason. I am very interested

Can you send them to my email address as attachments? I can't see them here for some reason. I am very interested

What is your email?

What kind of power was this setup makng on the turbo car? Also where is the trigger wheel and how was it mounted to the pulley? How big was the turbo that was on the car?

I replied to your original thread. My email is dane_kavanaugh@yahoo

It will be easier to talk about this via email if that is possible for you

With this setup, it made 240whp at 14lbs of boost on a mustang dyno. It was using a T3/T4 Turbo. The trigger wheel is the aluminum plate with magnets mounted to the back of the crack pulley.

This was the original setup:
http://i239.photobucket.com/albums/ff4/qadirz/BMW%20E21%20Project/p6140040.jpg

The tuning was done by the same person that tuned this Turbo 2002: http://www.kitoautosport.com/silver2002.html

Nice!! Do you still have the exhaust mani as well?

I am actually keeping all the turbo hardware.

SOLD! I am so happy it is going on another m10.

damn...

damn...

are you saying this because you have seen this system on the car?

Thanks Zia cant wait to get it!!!

No, I was selfishly hoping no one would buy it at this time so in a couple months I could snag it from him.

Sorry bout that.... not really because This is exactly what I needed to get my project off the ground!

Amen brother...

Just recieved it today! Man was I excited to open that box. What was even more exciting is the fact that the dyno sheets were sent as well as A/F ratios and a lot of other paperwork. That was a nice touch Zia, thanks a million as this will help me squeeze a few more ponies out of it.