Hey guys. Got into a little fender bender and I have decided not to fix the car. Don't worry I have a lot of other projects/chassis to work on! This is my personal car.

In any case, I have owned this car for the better part of 4 years. I know the car inside and out. Most of the parts are in fantastic condition unless otherwise noted. I spent a lot of money on a auto-manual swap along with many other little knick nacks. I am not selling everything however, whatever I do not keep is for sale. Here is a small list, PM if you have any requests. I'd like to get most of the larger items sold/deposit before tearing into the car. I am going to allocate money for my next project so please help the cause. I will post pics tomorrow or whenever I can get them hosted. Also everything is still intact so anyone whom wants to see the motor running can come take a look themselves.



S50 Engine w/ accessories, harness and DME with approx 75k - $3300

This is the whole motor and everything you need to drop this into any OBD1 e36 or a great swap option for those e30 guys. Comes with everything including, exhaust manifold, intake manifold, alternator, PS pump, oil filter housing, motor mount arms, fuel rail and injectors, coil packs, engine harness, silver label 413 DME, ect. Asking $3300. Not looking to part unless all parts can be spoken for. Motor still in the car and can be viewed and turned, driven. Compression test done during the summer, all 200-210 across.

Manual tranny swap kit - $1200

This is my own personal manual swap kit that I put together for the car last year. Everything is included for your swap. Parts include M3 driveshaft, ZF Transmission, 5k new Master Cylinder, 5k Slave Cylinder, M3 shift console, M3 Shift lever, Pedal Cluster, used clutch and flywheel, associated lines, Reverse light wiring pigtail, shift boot, ect.

Complete Black Interior - As listed

Black Dash - $100
Non Sagging Glovebox - $75
Dash+glovebox - $150
18 button OBC and rear harness WORKING LEDS - $100
Center Vent - $20
Kenwood HU - $50
Sunglass holder - $15
Center Console - $40
Armrest retrofit kit - $120
Vaders in 8/10 Condition - $550
M3 Rear Bench $150
Front Door Panels - $100 ea.
Rear Door Panels - $75 ea.
Complete 4 door panel set - $300
Black Headliner - $100
A Pillars - $30
C Pillars - $20
Sun Visors - $25
M3 Door Sills - $40

Exterior - As Listed

Front Bumper (Includes All Mouldings, mesh, lip) 8/10 Condition - $325
Rear Bumper (All Mouldings, Diffuser) 8/10 Condition - $200
ACS 3 Piece Lip Spoiler - $350
ACS Lip Spoiler w/ Trunk - $400
M3 Twisty Sideskirts - $150
M3 Coupe Mirrors - $150
Front Fenders - $100 ea ($160 for both)
M3 side mouldings - $100

Suspension/Brakes - As Listed

M3 Front Suspension includes 95 M3 Stock front shocks, control arms, subframe, sway bar, Both hubs w/ cross drilled rotors and new mintex pads. Everything you need for a front M3/suspension and brake conversion - $450

M3 Rear Suspension and brakes including stock rear shocks, M3 sway bar, Rear Trailing arms, Brake calipers, carriers, New Zimmerman Blacks with Mintex Pads, Subframe, rear control arms, spring perches, stock M3 rear springs. Everything you need for a rear M3 suspension and brake conversion - $350

Take both for $700

M3 Steering Rack w/ Tie Rods. NO LEAKS - $175



If there is anything else you might want to request please PM me. There are a bunch of items i did not list. I will get pics of shortly. Again I am not looking to pull the parts unless the big ticket items are spoken for. PRICES DO NOT INCLUDE SHIPPING. Thanks!!!!


P.S. Installs can be arranged for any of these parts.

Could you sell just the maplight and visor lights? Price?

replied

bump for you. :confused

adam

is the front bumper complete with the underpanel as well? (porkchops, etc.)

LMK bc I may want you to throw it on for me .. may finally be able to get a well sorted bumper again .. anything would be a step up from my beat up/cracked bumper

Dan, ok ill try to pull it off for you so you can look at it. I want to keep the car intact until someone picks up the drivetrain. Sad to part out my car!


on a lighter note... your mod list is getting biiig :)

I tell you what, when she's all said and done, I'll swing by and check out the bumper, if it's good then I'll swap it out on the spot if possible :) but yknow how much I bitch about my bumper, so it's pretty likely I'll want it haha

and on a lighter note, now your list can finally grow hehehehe .. I wanna hear "woooooosshhhhhhh pffft" asap!

yeah we'll see lol

I was actually start to care more about this one too... ahhh what can you do.

shift boot, knob, short shifter, floor mats...have them/prices?

Are you selling your wheels?

Think cosmos mirros would look funny on Schwarz II?

Do you have black floormats? What about the little black plastic piece that covers the bolt where the seatbelt attaches to the door frame? thanks!

Do you have black floormats? What about the little black plastic piece that covers the bolt where the seatbelt attaches to the door frame? thanks!

I have the bolt that attaches to the door frame, 5 dollars shipped.

Think cosmos mirros would look funny on Schwarz II?

no I dont think so. I have a customer who put cosmos front and rear bumpers on his swartz 2.

Are you selling your wheels?

I have a few sets of wheels for sale. Also I have a lot of interest on the mouldings so I am staying firm @ 100

shift boot, knob, short shifter, floor mats...have them/prices?

nope none of that for sale unless with the tranny swap kit (not the SSK I am keeping that).

ill take the whole car and trade u mine plus cash lol

if not free up:D

ill take the whole car and trade u mine plus cash lol

if not free up:D

NOS boy, I need to part the car out and make a certain amount of money from the part out so I can pay for my next project... I'm thinking Z4M... :devillook

I need the passenger side front fender. Any scratches, dents, etc on it? Price break if I come and pick it up?
LMK

Sorry to hear about the car. What would you want for the headers + midpipe?

I need the passenger side front fender. Any scratches, dents, etc on it? Price break if I come and pick it up?
LMK

I priced for pick up or shipping is on the customer so sorry no price break unless you buy both fenders. I think my price is very very fair.

Sorry to hear about the car. What would you want for the headers + midpipe?

ummm... I can do $100 for both.

I know this kinda is stupid but I need a hood emblem... my is horribly sun faded. how much would ya charge? Also do you have a weighted shift knob? Im looking to pick one of those up to... my light knob sucks.

do you have any chips for a '95 m3 (413 DME, early production)?

I priced for pick up or shipping is on the customer so sorry no price break unless you buy both fenders. I think my price is very very fair.

$100 is fair enough. How about the condition---scratches,dents,etc?

there might be a small small dent. I can't remember. Anyway when I get the motor and trans kit sold I will be moving on taking off the other parts.

badge and knob?

I need headlights

Do you have one of these? How much?
http://vorshlag.smugmug.com/photos/96368249-M.jpg

:)

dont have a good nose panel

there might be a small small dent. I can't remember. Anyway when I get the motor and trans kit sold I will be moving on taking off the other parts.

Just let me know.

Did you sell the seat belt bolt covers? If not I'm interested and can come and pick them up. Also interested in the two heat/air vents in front of the passenger seat too. Please PM me.

Thanks.

damn Adam... sry to hear... at least u get to start a new project =]
bump for u.

can you email me with contact info.. i live in queens...i have cash in hand
my email is rickyk.mo@gmail.com
i cant accept pm... i new to this forum...and the bmw crowd

still have the kenwood head unit? pics?

ill take pics tomorrow when the weather get s a little nicer

Need a
driveshaft,
fan shroud,
engine mounts,
metal nose panel with grills

you need mount arms or mounts???

you need mount arms or mounts???

Mounts

I have lightly used OEM mounts for $30 shipped.

pmed you

I have lightly used OEM mounts for $30 shipped.

pm me your paypal.What about other parts?

replied

Rear seats? Pics possible?

ill pics asap.

Pics of front bumper and 3 piece ac schnitzer? Also, what is included with the bumper (molding, mesh, brake ducts, etc)?

Could you also post some pics of it before it was wrecked?

Do you still have the front door panels?

The car is still complete as I am not tearing into until motor and trans kit are sold so yes everything is still available.

No I don't have pics of before it was in an accident. I don't really like taking pictures of my own car, don't know why.

I think I may keep the ACS spoiler for my next car.

Yes I still have the front door panels.

The bumper comes with everything but it is most likely sold once I pull it off (have 5 interested parties)

LSD? how much?

Are you selling your instrument cluster? If so, I am interested. How many miles, any bad pixels, etc.
Thanks

i need a drivers side vent window please

i'd like to take the m3 side mouldings off your hands. can u send pics to jshock03@aol.com i could pick them up.

Are the vaders heated & powered? Sorry about your accident.

price of complete engine and tranny 3.0 0r or converted to 3.2

Pics of ACS 3 piece spoiler anyway?

in what condition is the headliner and carpet?

price for motor and trans pickedup....?

Just wondering, do you have the windows switches still? Was this car equipped with headlight washers? I need the assembly for that. There is also a bunch of parts that hold up the carpeting in the trunk (goes on top of the spare tire). Please PM me back.

http://www.realoem.com/bmw/showparts.do?model=BG13&mospid=47485&btnr=61_0073&hg=61&fg=45

Hope that link helps. I need #16 but I will take more for the right price.

I need a rear hub + wheel bearing. Still have one?

Well, dibs on front bumper.

Do you still have the steering rack available?

Do you still have the steering rack available?

It might be spoken for. PM me.

Well, dibs on front bumper.

got local dibs once this bad boy is taken off.

I need a rear hub + wheel bearing. Still have one?

yeah I think I do. Please PM me.

Just wondering, do you have the windows switches still? Was this car equipped with headlight washers? I need the assembly for that. There is also a bunch of parts that hold up the carpeting in the trunk (goes on top of the spare tire). Please PM me back.

http://www.realoem.com/bmw/showparts.do?model=BG13&mospid=47485&btnr=61_0073&hg=61&fg=45

Hope that link helps. I need #16 but I will take more for the right price.

I have the window switches

price of complete engine and tranny 3.0 0r or converted to 3.2

Still interested. PM me.

in what condition is the headliner and carpet?

carpet is called for. headliner is in excellent condition. It might be spoken for however pM me anyway.

passenger window, and hood latches?

It might be spoken for. PM me.
I did, on 10/15 and again on 10/21. Have you gotten those?

do you have the plastic valve cover.....pm me. thanks

you cannot receive PMs yet. I have the plastic valve cover, $50+shipping.

Any word on the pass side front fender?

Pics of Vaders?

my wife would love to have the vaders...

Trade Me You Bastid

Center Console include cup holder insert and/or armrest?

Driver Side Window Regulator?

PM sent. didn't see if this was a coupe or sedan...unless 95 m3's only came in coupes ;-)

please be a coupe, please be a coupe!

PM sent. didn't see if this was a coupe or sedan...unless 95 m3's only came in coupes ;-)

please be a coupe, please be a coupe!

Yeah, no 4 doors in '95.


True '95 only variable rack? Pics of tag please to snapontodd@earthlink.net

Thanks,
Todd

Rack is tentatively sold to a local

I need the passenger side fender liner(The plastic piece that goes inside the wheel well) Also my car is a 4 door, Im not sure if that matters.

Thanks.

Do you still have your left front fender, ill take that off ur hands asap. Email me at chulford@uncc.edu -Thanks

I want the mirrors! How much shipped to 93401?

Also, do you have the black glovebox trim?

I need the passenger side fender liner(The plastic piece that goes inside the wheel well) Also my car is a 4 door, Im not sure if that matters.

Thanks.
ive checked before this and they are different part numbers and also the coupe one cost less than a sedan one so they must be different.

By any chance, do you have an arched rear wing that you took off pre-ACS?

I have an arched wing painted Mugellorot

How much the m3 mirrors?will it fit a black E36 coupe?let me know Im interested,thanks..bnancs89@yahoo.com

I need the passenger side fender liner(The plastic piece that goes inside the wheel well) Also my car is a 4 door, Im not sure if that matters.

Thanks.

???

can you please post pics of the 4 door panels? interested if they are in good condition

if youd rather send to email then adamer1@umbc.edu

thanks alot

The door panels that you have are they for a two door? if so can i see some pix to nitrogass2000@yahoo.com

Thanks

Are the window switches spoken for? I could also use the seat - belt buckle for the drivers' side.

Hey adam. I need a M3 front bumper. Silver would be great. Ill give you a call sat. afternoon.

give me call

how much for the steering rack shipped to 97051 (oregon)

your question has been answered before.

payment sent for fan w/ fan clutch

I need the 2 front controll arms for e36 coupe,how much shipped here in texas?let me know,thanks....bnancs89@yahoo.com

Also, I sent you a PM regardign the badge. How much for the M3 badge in the rear?
Also, a price on that spoiler?
Thanks!

payment sent for fan w/ fan clutch

its in the mail. thanks.

I need the 2 front controll arms for e36 coupe,how much shipped here in texas?let me know,thanks....bnancs89@yahoo.com

email sent

Also, I sent you a PM regardign the badge. How much for the M3 badge in the rear?
Also, a price on that spoiler?
Thanks!


the 3pcs ACS spoiler? If I were to sell it, id sell it for $350.

No M3 badge to be had.

Is the clutch fan in this car applicable to an e30 325is?? If so, ill take it.

Still have the C-Pillars? Are all locking tabs in place/not cracked?

Sorry, the arched mugello wing.

sending PM.

Still have the C-Pillars? Are all locking tabs in place/not cracked?

I also need these of all tabs are intact, if ESNcBlurM3 doesnt buy it
I also need the center vent as long as it doesnt resist movement and beak like mine just did.
$50 shipped do?

hello,

my cats are shot on my 95 m3, are you selling that part off the car.

thanks

I need the rear interior panel, DS where the rear DS passenger would put his arm. Also want the exterior trim strip on PS if you have it. I'd need these shipped to 78006 TX. Thanks.

Looking for the coinbox in the center shifter area and rechargeable glovebox flashlight. Also tried to PM on a UUC clutch stop, but no replies.

My e36 coupe needs a good front controll arms,if you have one let me know,thanks...bnancs89@yahoo.com

Hello, have you shipped my OBC yet?

I don't get this guy. He's on the forum and posting in other threads, but doesn't respond to us.

i do not get it, i paid in full right when he emailed me, and now he will not respond. I told him I would give him till tomorrow then I will put a complaint in with paypal.

I don't get this guy. He's on the forum and posting in other threads, but doesn't respond to us.

I apologize however I am very busy with preparation of the new shop. If you need to get in contact please PM or e-mail. Posting on threads is hit or miss.

i do not get it, i paid in full right when he emailed me, and now he will not respond. I told him I would give him till tomorrow then I will put a complaint in with paypal.

Paul, check your email. Tracking # was sent.

price of rear bumper with all attached pieces to 33432?

Don't forget that you can set up subscriptions to threads so you get emails when there's a reply. Especially handy when you have a For Sale thread. Don't have your email and your account isn't set up here to receive them through your profile. Also sent you a few PM's with no response. Will send another I guess.

Silex, got your PM, will reply tonight

i sent payment nearly a week ago and still no tracking #..... i sent a pm no response???

do you have the power steering pump? how much shipped to 92630? Thanks.

i sent payment nearly a week ago and still no tracking #..... i sent a pm no response???


Still catching up on PMs... replied.

do you have the power steering pump? how much shipped to 92630? Thanks.



$45 shipped to you.

Do you have one of these? How much?
*image of front grill/bumper thing removed due to my inability to post them (from post on the first page of this thread)*

:)


Sorry to hijack this thread (not trying to in any way), however, does anyone know the official name for that part? I have been searching for a black one to replace the dented one on my 98 328iS. Anybody know? Better yet, anyone know a place/website that sells that particular part?

does this guy ever get back to anyone

hey do you still have the front and rear bumper???? i cant pm im a newb

I do however I have local buyers biting at the bit to get this.

BTW guys, I am really sorry for not getting back to anyone. I am very very busy trying to get my new shop up and running and that takes priority over answer PMs. Again, really sorry.

Still catching up on PMs... replied.

$45 shipped to you.


Paypal ok? Please give me your paypal account for the PS pump. Thanks.

Hi,
I'm looking for interior trim panel next to the rear DS passenger's elbow, and the exterior trim strip from the door and front fender on the PS. Do you have them in good condition?
Thanks

pics of driver door panel if black to itsrichard (at) gmail
if not, then ill just take the 18b obc with harness.

differential for sale still? Pm please...

Adam,
What's with the lack of communication on the diff? I'd like a status update at least man. I sent the payment on Monday, and there's been no communication to date. Update please?

Can I see pics of the ACS parts?

Yo Adam call, email, or PM me. Even if you haven't managed to ship that diff yet I need to know something. Thanks.

shipping # has been sent, phone down last 2 days

pm sent

do you have door panels for sale?

coil packs forsale?

PM me please

looking for front and rear door panels also!? Still available?

Send me a PM if you will sell the drivers side door handle assembly.

Thanks

How about a fuse box cover up front in the engine?

nm, Thanks anyway. GL with sale :)

would you sell just front suspension only?

pics of the front door panels if they havent been sold yet. Also, do you have the driver side door seal? If so, what kind of shape is it in?

Do you still have wheels? What style? Condition?

I'm still interested in the drivers side interior rear trim panel and the passenger side exterior trim strip. PM me if you have it for sale.

Thanks!

hey i was wondering if you still had the front bumper if you do you can contact me at flatland4life314@aol.com

drivers side door handle sir?

ill take the m3 front bumper you have... 300 shipped?

Shoot me a PM if you would sell the drivers side exterior handle

I can paypal you on the m3 side mirrors anytime,let me know how much shipped here in houston,texas,if you can,I need to see the pics pls.thanks.....bnancs89@yahoo.com

youve been pm'd concerning oil pan

do you have any exhaust stuff laying around?

mid-pipe and center section?

Hi I need transmission crossmember part number: 24701136499
http://www.realoem.com/bmw/showparts.do?model=BK83&mospid=47477&btnr=24_0683&hg=24&fg=10

interested in ECU (if 506) and security system?

clear your pms!

How about some pics of the front and rear brake setup and components I pmed you about. I need the rear axels and a 3.15lsd if you have those. Also I'll take the side skirts.

cleared

Is the rear deck (the part above the rear seats) without the speakers available?
Thanks

drivers side front spindle... available?

number 2:

http://i144.photobucket.com/albums/r181/dryskal/frontsplindle.png

thanks

Do you still have the front door panels?

pictures of the armrest to micko1103@yahoo.com please

Have you parted out the front and rear suspensions. I'm interested in the front subframe, rear subframe, rear trailing arms, as well as the front king pins.

Hi,
I am looking for the pass side door trim strips (exterior door and fender just in front of it). Also, would like the trunk seal gasket, and the interior rear passenger side panels (panels holding the elbow rests for rear passengers).

Clear your PM's again.

Hey Adam. . . PM'd you about front bumper . . . also could we work something out for the headliner if you still have it? thanks
nick

BUMP for a good Vendor

Solid seller and quality dude---

I owe you a 506.

Im comin by to the new spot soon but you gotta let me know when--just saw this FS thread

window switch for coupe? (mounts on center next to shifter)

do you have a stock alarm system?

hey do you still have your side skirts....very interested shoot me an email paradise_rtl@yahoo.com

I may have a set of sides still available.

I have a stock alarm system off a 1996 328ic

I have window switches, 10 shipped.

Thanks for the kind words guys!!! Cashmoney, drop by the shop whenever and bring the DME if you can, thanks!

uh...

http://forums.bimmerforums.com/forum/showpost.php?p=11886918&postcount=145

kthx :D

only sell spindles in pairs.

Passenger side front fender? Sorry, I didn't have time to read the enite post.

Passenger side front fender? Sorry, I didn't have time to read the enite post.

you have been looking for this part for the better part of a year... no?

Yeah, I let it slide for a year now but I'm back on the hunt.

hey adam . . pm me back.. left you a VM

Will the front door speakers fit a 94 coupe door panel. If you still have them and they are in excellent shape (the grills) I will take them. PM sent.

check pm

Hey man, wanted to say thanks again for the sweet deal on the 3.15 diff - it's been solid for 3k miles. PREESH!

nice looking car Patrick!

I am looking for interior trim pieces. PM me!

steering rack still available?

instrument cluster??

hey adam do you still have a front bumper? PM me or call me because i want to buy it

steering rack still available?

no racks right now

instrument cluster??

I have one with 60k on it. PM me.

hey adam do you still have a front bumper? PM me or call me because i want to buy it

nope.

interested in manual swap. miles on clutch+flywheel? shipping to 94121? please email me at ng.kyle@gmail.com

Pics of the dash and glove box if you can, Email:Jamdun17@aol.com

hey adam just wondering if you got any word on the driver side door handle we spoke about