farhod
09-29-2007, 10:21 PM
so if you guys remember i used electrical tape which was good for a few days but then it started to bubble and the adhesive wasnt as strong so i decided to paint it...im not done yet but heres some pics of what ive done...first i start off with a mix of wetsanding and dry sanding with 1000 grit. then i put 2 coats of self etching primer each coat 2 minutes apart and then leave it for 30 minutes....then i apply the first coat of the sandable black primer. each coat is 10 minutes apart and after the 2nd coat i let it sit for 30 minutes...then third i apply the gloss black paint and let it dry for 10 minutes and then apply a second coat. and thats it
i used duplicolor DAP-1690 self etching primer, DAP 1698 black sandable primer and then DAL-1677 gloss black laquer
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02382.jpg
taped off first section and 1st coat of self etch
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02381.jpg
1st coat of primer
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02385.jpg
2nd coat of primer
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02384.jpg
gloss black applied
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02388.jpg
dried
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02389.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02390.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02391.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02392.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02393.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02394.jpg
back done
id say this would be a weekend project if you want to do it the right way..hopefully the paint will hold up since ive let the primers sit and dry but only time will tell....more pics will be added as i continue
DAY 2
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02395.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02399.jpg
Passenger side complete
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02396.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02401.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02400.jpg
Drivers side started
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02397.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02398.jpg
i used duplicolor DAP-1690 self etching primer, DAP 1698 black sandable primer and then DAL-1677 gloss black laquer
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02382.jpg
taped off first section and 1st coat of self etch
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02381.jpg
1st coat of primer
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02385.jpg
2nd coat of primer
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02384.jpg
gloss black applied
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02388.jpg
dried
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02389.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02390.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02391.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02392.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02393.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02394.jpg
back done
id say this would be a weekend project if you want to do it the right way..hopefully the paint will hold up since ive let the primers sit and dry but only time will tell....more pics will be added as i continue
DAY 2
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02395.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02399.jpg
Passenger side complete
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02396.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02401.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02400.jpg
Drivers side started
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02397.jpg
http://i213.photobucket.com/albums/cc203/bimmerboard/DSC02398.jpg