ok so i just received my depo headlights and an angel eye kit off ebay

http://cgi.ebay.com/ebaymotors/BMW-E36-Angel-Eyes-w-Super-Bright-CCFL-EURO-HEADLIGHTS_W0QQcmdZViewItemQQcategoryZ33710QQihZ00 7QQitemZ170145207540QQrdZ1QQsspagenameZWDVW
http://cgi.ebay.com/ebaymotors/BMW-E36-Angel-Eyes-w-Super-Bright-CCFL-EURO-HEADLIGHTS_W0QQcmdZViewItemQQcategoryZ33710QQihZ00 7QQitemZ170145207540QQrdZ1QQsspagenameZWDVW

but the angel eyes dont come installed on them which i thought might be the case. no big deal, so i take off the glass but i cant figure out how these angel eyes are supposed to fit into the lens. and to boot there were no instructions sent with them.

do i have to cut the clips off the angel eyes and just glue them to the glass inserts?

you can see below that that there are some tabs attached to the angel eyes. and they dont want to fit in any way.
http://img112.imageshack.us/img112/4290/sspx0350wf1.jpg
you can see below that the angel eyes are not going to fit w/o modification
http://img292.imageshack.us/img292/8429/sspx0351sz5.jpg
then after cutting the taps glue them to the front of the lens like below
http://img508.imageshack.us/img508/6446/sspx0352pg4.jpg
then reinsert the glass/angel eyes in like below?
http://img251.imageshack.us/img251/6757/sspx0354ta3.jpg

Im not sure what you have.Mine cliped in at the top of the light.How much did you pay for them?I got mine from habbie pre-installed.Customer service with him is # 1