ok i got a 94 bmw 325i and the clutch pedel goes to the floor and grinds really bad then it dont wana come back up. it sounds like thethrow out bearing but idk... anyone got any info on it let me know it will be greatly appreciated...

if it grind, it seems to me the forks of the pressure plate is either thorn or grinding on the bearing that is seized. either way this is not goooooood.

The clutch pedal going to the floor and staying there sounds like a failure in the clutch hydraulics, but it could be a problem inside the bellhousing. Or it could be a problem with both. The first thing to do would be to check the slave cylinder and lines for leaks and if that's okay the master cylinder is the likely culprit.