MtbikingKing27
08-31-2007, 08:30 PM
I just got a braand spanking new set of Depo projectors from my buddy for reeal cheap cause his HIDS wouldnt fit em, but they have the Chrome housing and its toootally killing my completely blacked out M3 look. If you have clear corners that stick out from your black housing headlights these would go with them perfectly! Look aaaamazing in when the sun hits them too :eyecrazy
Give me a holler if anyone is interested ;)
MtbikingKing27
08-31-2007, 08:50 PM
:eek: ....I dono
I was thinking bout sanding them down to the black, but I am kind of sketched out bout it. How easy is it to seperate the glass from the housing??
The-Great-328ic
08-31-2007, 09:26 PM
:eek: ....I dono
I was thinking bout sanding them down to the black, but I am kind of sketched out bout it. How easy is it to seperate the glass from the housing??
quite easy actually
the glass is held by a couple of clips, all you need is a flat head screwdriver
dongmooner
08-31-2007, 09:36 PM
yeah let's see some pics!
MtbikingKing27
09-01-2007, 12:22 PM
I need to find my roommates high res camera, but shes in the sun right now and they look aaamazing.
The-Great-328ic: When I pop the metal clips from the top and bottom and the plastic ones from the sides, the glass comes out but is glued to the actual chrome housing.
habbie
09-01-2007, 01:20 PM
I need to find my roommates high res camera, but shes in the sun right now and they look aaamazing.
The-Great-328ic: When I pop the metal clips from the top and bottom and the plastic ones from the sides, the glass comes out but is glued to the actual chrome housing.
bake it in the oven to loosen up the seal, 175deg 15 to 17 minutes, pre heat the oven before putting the lights in and do them one at a time.
The-Great-328ic
09-01-2007, 04:01 PM
I didnt know projectorse36's lense covers were glued
mikese36
09-01-2007, 04:05 PM
I didnt know projectorse36's lense covers were glued
Mine are not Glued.A rock busted mine and I just replaced the glass..
addnon
09-01-2007, 04:49 PM
Yeah, mine weren't glued either, just clips.
MtbikingKing27
09-02-2007, 02:25 AM
My Depo's are glued, Thx Habbie for the info. What should I reseal them with??
habbie
09-02-2007, 02:29 AM
My Depo's are glued, Thx Habbie for the info. What should I reseal them with??
5 more minutes in the oven and close them up, nothing else needed.
MtbikingKing27
09-02-2007, 01:54 PM
alright, thx man. Ill try it out, I'll post back in a couple days when I get a chance to do it.
mikese36
09-02-2007, 03:06 PM
Cant you just take the chrome housing out?I think Addnon done this.Im wanting to do mine also.
addnon
09-02-2007, 09:55 PM
Cant you just take the chrome housing out?I think Addnon done this.Im wanting to do mine also.
not the housing; just the chrome rings between the housing and lights.