View Full Version : Parting Brilliantrot 93 318iS - Free m42 and tranny


525iT_Feen
08-21-2007, 11:59 AM
Started parting this guy out a few months back but never made an entire thread.

I will keep it short the car was totaled in a front left hit. The front and rear bumpers, sideskirts, ZKWs, taillights, fogs, wheels, suspension, door panels, full stereo system, Cup mirrors, moldings, Max-v lip, and rear diff are gone.

Still available:
- Clutch and flywheel - 10k miles
-Driveshaft with BRAND NEW (80 miles) joint bushing
- Front Passenger Side control arm - (80 miles)
- 1 rear halfshaft in great shape
-Seat belt receptacles
-Fuel tank
-Full power wire
-Interior buttons, switches, etcStill have:
- 2 Rear hubs in great shape with BRAND NEW wheel bearings (80 miles to be exact)
- Full intake manifold
- Headers
- Stock cat back in excellent shape
- lolipops with M3 bushings (80 miles on them)
- Trunk hindges
- Tan deadpedal with no cracks
- Tan Armrest console
- Black Armrest
- Center console and dash
- Speedometer w/ 180k aprox
- Various computers/electronics
- 2 front windows
- 2 Hatch windows
- 2 full loaded doors with very minor dents and good original paint.
- etc.

Updated: 1/20/08


I will not be pulling the motor for any price! However, anyone looking to take the motor and tranny out on there own can come and do so this week. You can keep both, or whatever you need for free. Thats right, FREE!

If you have any particular part you are looking for feel free to PM or ask me. I have sold alot off of this vehicle already but still have tons of parts to go. Fast shipping. PM me or post here with questions.

Car before the accident:
http://photos.tobinhosting.com/d/138836-2/DSC02819.jpg
http://photos.tobinhosting.com/d/138857-2/DSC02835.jpg

Car after the accident:
http://photos.tobinhosting.com/d/139055-2/DSC03160_002.JPG

Shell is sold.
Tranny is gone.
Motor is tentatively sold/gone.

btl1990
08-21-2007, 12:05 PM
I need the is badging. PM me price.

525iT_Feen
08-21-2007, 12:12 PM
I need the is badging. PM me price.

The trunk was shaved. No badging... Sorry.

Verruckt
08-21-2007, 12:18 PM
I'll take the shell, and pick it up

525iT_Feen
08-21-2007, 12:22 PM
I'll take the shell, and pick it up

Rear left quarter panel has huge dents in it from a hammer (someone decided it would be funny to hit it since the car was already totaled). Besides that, you can come get it next weekend, I just need to finish removing some stuff off of it.

Verruckt
08-21-2007, 12:57 PM
Rear left quarter panel has huge dents in it from a hammer (someone decided it would be funny to hit it since the car was already totaled). Besides that, you can come get it next weekend, I just need to finish removing some stuff off of it.

Dents can always be repaired. Not too concerned about minor body damage really.

replying to PM now

///M3Matt
08-21-2007, 02:15 PM
if verruckt doesnt take the shell...ill come pick it up :)

Verruckt
08-21-2007, 03:14 PM
Tenatively sold ;)

trumpeter
08-21-2007, 06:06 PM
Jack still available?

Trumpeter

Mauritius Blau
08-21-2007, 07:25 PM
shame it was nice brilliantrot!
could you give me a price on trunk lid + driver side door(no inside panels needed) shipped to 33063
thx

Verruckt
08-21-2007, 08:19 PM
Mine mine mine!!! All Mine!

Dont think it has a driver's door though?

80EuroM3
08-21-2007, 09:28 PM
PM sent

525iT_Feen
08-22-2007, 01:36 AM
Guys as soon as I straighten out everything with Verruckt I will post up. If he does not buy the shell then I will PM quotes.

Mauritius Blau
08-22-2007, 11:22 PM
yeah just keep us posted :)

525iT_Feen
08-23-2007, 01:36 PM
Jack still available?

Trumpeter

Jack was never there. :dunno

shame it was nice brilliantrot!
could you give me a price on trunk lid + driver side door(no inside panels needed) shipped to 33063
thx

PM sent.

525iT_Feen
08-23-2007, 11:50 PM
Shell is sold.
Tranny is gone.
Motor is tentatively sold/gone.

Driver side door, trunk, etc, etc still available.

feltsandel
08-24-2007, 12:04 AM
would you sell the bushings for 15$ shipped?
thanks,
rob

525iT_Feen
08-24-2007, 12:07 AM
would you sell the bushings for 15$ shipped?
thanks,
rob

Which bushings?

feltsandel
08-24-2007, 12:38 AM
The m3 control arm bushings.
Thanks

thundercat
08-24-2007, 02:46 AM
how much would u like for the pass fender shippe dto canada?
no rust/dents i assume?

525iT_Feen
08-24-2007, 11:41 AM
The m3 control arm bushings.
Thanks

I will do 30 shipped IF I can get them off. They are pressed on so I'm not sure how easy its going to be to pull them off. :dunno

how much would u like for the pass fender shippe dto canada?
no rust/dents i assume?

I'll get back to you with a quote. It got scratched by the hood in the accident so it will need to be repainted anyway. Its your call on whether you want it or not.

525iT_Feen
08-28-2007, 12:51 AM
BUMP!
So far their has been alot of talking but not much buying. Parts are ready to ship guys. What is needed?

525iT_Feen
08-29-2007, 02:02 PM
Bump...
Pulled the entire power wire out 5 minutes ago.
Shell is sold to Verruckt

kdieselinc
08-31-2007, 12:22 AM
rims solds? damaged?

FierySphere
08-31-2007, 12:33 AM
what shape is the armrest in ?

525iT_Feen
08-31-2007, 10:50 AM
rims solds? damaged?
I only have a winter set left. The Moven's were sold.

what shape is the armrest in ?

Black Armrest: Great Shape
http://forums.bimmerforums.com/forum/showthread.php?t=803119

Tan Armrest: Console is great, armrest isn't to good
http://forums.bimmerforums.com/forum/showthread.php?t=803112

525iT_Feen
09-05-2007, 10:38 PM
Bump!

525iT_Feen
09-08-2007, 12:07 AM
Bump?

dorejades
09-08-2007, 10:14 PM
Hey man I was wondering if the shroud covering survived. if so how much shipped to 95240[IMG]http://i132.photobucket.com/albums/q35/dorejades/Shroud.png(its number 4)

525iT_Feen
09-09-2007, 03:12 AM
Hey man I was wondering if the shroud covering survived. if so how much shipped to 95240[IMG]http://i132.photobucket.com/albums/q35/dorejades/Shroud.png(its number 4)

Make me an offer...

dorejades
09-09-2007, 08:12 PM
How does $20 shipped sound

525iT_Feen
09-11-2007, 02:20 PM
Bump.

SpeedTheory
09-15-2007, 02:21 AM
Do you have the Secondary Air Pump & Check valve? PM me.

525iT_Feen
09-16-2007, 12:19 PM
Bump...

evo2k6
09-18-2007, 09:11 AM
will trunk fit an m3

Danny318
09-18-2007, 11:35 AM
Can I have the two plastic front grill peices? The shiny ones... PM me if avaialable

tc 3457
09-18-2007, 05:25 PM
do you have the cyl head if so how much please let me know.
Thanks,Tracy

525iT_Feen
09-18-2007, 05:44 PM
will trunk fit an m3

Yes & Sold.

Can I have the two plastic front grill peices? The shiny ones... PM me if avaialable

The kidney grills? Where are you located? I have them in good shape.

do you have the cyl head if so how much please let me know.
Thanks,Tracy

I have one, but you need to PM me if your interested because there is a catch.

ACS3 CLS
09-18-2007, 06:44 PM
pm sent.

tc 3457
09-18-2007, 08:02 PM
not sure what PM me is ? I am new to this. my e mail is tc21470@yahoo.com

abq
09-19-2007, 12:49 AM
would you be willing to sell the lock mechanism on the driver side door?

525iT_Feen
09-19-2007, 01:11 PM
would you be willing to sell the lock mechanism on the driver side door?

Yes, but I'm not sure that makes sense because your key won't match. :dunno

crisko
09-19-2007, 04:18 PM
I'm looking for the little black pastic piece that covers the bolt where the seatblet attaches to the frame near the door. THanks!

abq
09-19-2007, 06:51 PM
Yes, but I'm not sure that makes sense because your key won't match. :dunno

you can take out hte whole key assebly thing. you can just leave the other mechanism in tact. heres an exact pic of what i need.
http://img208.imageshack.us/img208/8366/brokehl1.jpg

525iT_Feen
09-19-2007, 06:57 PM
I'm looking for the little black pastic piece that covers the bolt where the seatblet attaches to the frame near the door. THanks!

Pic, I think I know what you are talking about but I want to make sure.

you can take out hte whole key assebly thing. you can just leave the other mechanism in tact. heres an exact pic of what i need.
http://img208.imageshack.us/img208/8366/brokehl1.jpg

I got ya, I'll sell you the whole lock mechanism just PM me an offer.

crisko
09-19-2007, 10:21 PM
Here's a link to the plastic seatbelt cover piece I'm looking for. Pic #1 shows what mine looks like, pic #2 shows what it should look like.

http://smg.photobucket.com/albums/v171/browntowel/?action=view&current=clip2.jpg
http://smg.photobucket.com/albums/v171/browntowel/?action=view&current=clip1.jpg

525iT_Feen
09-19-2007, 11:32 PM
Here's a link to the plastic seatbelt cover piece I'm looking for. Pic #1 shows what mine looks like, pic #2 shows what it should look like.

http://smg.photobucket.com/albums/v171/browntowel/?action=view&current=clip2.jpg
http://smg.photobucket.com/albums/v171/browntowel/?action=view&current=clip1.jpg

I don't even have those. Sorry.

BLOODBOUGHT
09-24-2007, 10:55 PM
Do you have your exhaust hangers? Part nine of the link below.

http://www.realoem.com/bmw/showparts.do?model=BE53&mospid=47480&btnr=18_0212&hg=18&fg=20

Thank you Sir.

525iT_Feen
09-25-2007, 10:47 AM
Do you have your exhaust hangers? Part nine of the link below.

http://www.realoem.com/bmw/showparts.do?model=BE53&mospid=47480&btnr=18_0212&hg=18&fg=20

Thank you Sir.

I have it, I can ship them on Saturday for $22 shipped, but I think you would be better off just ordering them new as I don't think mine have ever been replaced. It doesn't really make sense to buy used bushing in my opinion, unless you know they have low mileage (like my control arm bushings).

There yours if you want them.

525iT_Feen
10-19-2007, 04:02 PM
Bump.

525iT_Feen
10-21-2007, 03:49 AM
PMs replied to.

525iT_Feen
10-23-2007, 10:43 AM
Bump.

-Ignition is sold.
-Pass door, pass fender, airbag - pending sale.
-Control Arms - pending sale.

JustinE36M3
10-23-2007, 12:20 PM
alternator?

thundercat
10-23-2007, 03:53 PM
skirts/

525iT_Feen
10-23-2007, 05:37 PM
alternator?

Yup, I just replaced all the mounting brackets, bushings, and had the entire alternator rebuilt by a pro. That means brushes and all. Its a valeo alternator that was completely rebuilt (I hate aftermarket pepboy alternators). PM me, i'll include the bushings and all.

skirts/

Long gone.

JustinE36M3
10-23-2007, 09:13 PM
Yup, I just replaced all the mounting brackets, bushings, and had the entire alternator rebuilt by a pro. That means brushes and all. Its a valeo alternator that was completely rebuilt (I hate aftermarket pepboy alternators). PM me, i'll include the bushings and all.




how much shipped to 31804

525iT_Feen
10-24-2007, 08:43 AM
how much shipped to 31804

$120. It has about 800 miles on it since rebuild and is original.

modifiede30
10-24-2007, 11:10 PM
I need an M42, is it gone - I'm in MA.

525iT_Feen
10-25-2007, 10:16 AM
I need an M42, is it gone - I'm in MA.

I plan on pulling the block, tranny, driveshaft, and exhaust on Friday. The head is sold but the block was fine and ran pefectly. I also have all starter, alternator, PS pump, and so on.

modifiede30
10-25-2007, 10:30 AM
I plan on pulling the block, tranny, driveshaft, and exhaust on Friday. The head is sold but the block was fine and ran pefectly. I also have all starter, alternator, PS pump, and so on.

I might be interested in the block and some of the ancillaries/tranny. What are you looking for $$$ - block, tranny, driveshaft, starter, alternator? Don't need many other ancillaries - really need the basics to get the engine started - so intake etc would all be needed too if you have them- too bad the head is gone.

525iT_Feen
10-28-2007, 11:44 PM
Removed the rear control arms with hubs and calipers, fuel tank, full exhaust in great shape, driveshaft, alternator, starter, ABS system, PS parts, etc. The last thing is the tranny and the car goes to the scrap yard. I still have tons of really good parts guys.

The tranny is sold but the front pipe, cats, etc is all great and so are the control arms and hubs (80 miles literally on the bearings). Let me know if you need anything.

sjpgoalie
10-29-2007, 10:40 AM
I'll take the block, I'm local. You've got a PM.

525iT_Feen
10-30-2007, 08:49 PM
Block is gone...Enjoy Bobby, haha.

Elvis T
10-31-2007, 11:38 PM
I remember this being for sale almost two years ago.... Sad day.

525iT_Feen
11-02-2007, 12:51 AM
I remember this being for sale almost two years ago.... Sad day.

Sh*t happens and we have to move on. I'm driving one of my dream cars now though, so that only shows that good can come from bad.

CKKrause
11-04-2007, 12:13 AM
Do you still have the air box and rubber boots on either side of the airflow meter? How about the airflow meter? How much shipped to 94306? Do you do Paypal?

Thanks for your reply!

-CKKrause

525iT_Feen
11-04-2007, 02:45 AM
Do you still have the air box and rubber boots on either side of the airflow meter? How about the airflow meter? How much shipped to 94306? Do you do Paypal?

Thanks for your reply!

-CKKrause

Do me a favor and check www.realoem.com. Throw me some part numbers so I can double check. The airbox I have has a tiny crack in the bottom but is in perfect working order other wise. Give me a part # for the airflow meter so I know we're talking about the same part.

CKKrause
11-04-2007, 10:47 AM
I need the following parts:

Rubber Boot- #13711734258 (& associated hose clamps..if you have them)
Intake muffler- #13711734398
suction tube- #13711734573

Turns out I have an AFS in the pile, so I don't need your's unless it's cheap, then just as a backup...

Thanks again for your response!

-CKKrause

Th

525iT_Feen
11-04-2007, 12:17 PM
I need the following parts:

Rubber Boot- #13711734258 (& associated hose clamps..if you have them)
Intake muffler- #13711734398
suction tube- #13711734573

Turns out I have an AFS in the pile, so I don't need your's unless it's cheap, then just as a backup...

Thanks again for your response!

-CKKrause

Th

PM sent.

VertZ24
11-04-2007, 11:28 PM
I will buy the stock catalytic converters if you have them, will pay asap.

525iT_Feen
11-15-2007, 10:14 PM
I will buy the stock catalytic converters if you have them, will pay asap.

I was trying to sell the front pipe as a whole. The cat is in great shape. Whats your offer shipped?

ss350chevy
11-15-2007, 10:56 PM
Black drivers side srip rail/trim piece... PM me

525iT_Feen
11-15-2007, 11:28 PM
Black drivers side srip rail/trim piece... PM me

PM sent.

525iT_Feen
11-28-2007, 02:02 AM
Coils, wires, radiator, electric fan, shroud all sold.
Tons of parts still left. Probably can't beat my prices.

525iT_Feen
12-07-2007, 12:10 AM
Bizzump?

EdirtySicks
12-07-2007, 03:27 AM
differential for sale still? Pm please...

525iT_Feen
12-07-2007, 02:46 PM
differential for sale still? Pm please...

Sold to SoupNazi a while back. Sorry.

Nofrigginway
12-09-2007, 01:20 AM
what color is the interior I am looking for interior parts

525iT_Feen
12-09-2007, 03:53 PM
what color is the interior I am looking for interior parts

Tan.

Nofrigginway
12-09-2007, 03:59 PM
Do you have any of the following?
- front drivers side door handle black trim
- plastic piece that goes around the automatic shifter that tells you what gear you are in (the car has the wood interior trim bits, so i think this piece is supposed to be wood textured)
-front drivers side small tweeter speaker bezel( for the Harmon Kardon system), its a brown color
-wooden textured trim that goes above the glove box
-glove box latch, the part on the door with the hook that is held by the actual latch
-the small lightbulbs that go in the OBC that shows temp,date,time, etc.
-windshield wiper motor
-clips that hold the passenger side front sideskirt on
-rear wheel bearing
-spare tire

525iT_Feen
12-09-2007, 07:46 PM
Do you have any of the following?
- front drivers side door handle black trim
- plastic piece that goes around the automatic shifter that tells you what gear you are in (the car has the wood interior trim bits, so i think this piece is supposed to be wood textured)
-front drivers side small tweeter speaker bezel( for the Harmon Kardon system), its a brown color
-wooden textured trim that goes above the glove box
-glove box latch, the part on the door with the hook that is held by the actual latch
-the small lightbulbs that go in the OBC that shows temp,date,time, etc.
-windshield wiper motor
-clips that hold the passenger side front sideskirt on
-rear wheel bearing
-spare tire



From that list I have: the glove box latch ($15), OBC(I will give you the entire thing for like $30), the windshield wiper motor (replaced it with one from a 60k e36 - $70), and two rear hubs with BRAND NEW bearings (they literally have 80 miles on them - $300 for those in like new shape.) I have the spare tire too but its hideous, not sure if its even worth shipping.

os2
12-28-2007, 03:20 AM
I need a winshield wiper linkage without motor, what's the price shipped to 20176

525iT_Feen
12-28-2007, 01:56 PM
I need a winshield wiper linkage without motor, what's the price shipped to 20176

I replaced my entire assembly with a much lower mileage one a few months before the accident. $65 for the entire assembly and motor, I don't really want to seperate them and thats what I paid for it. I can ship tomorrow.

millertimebmw03
01-05-2008, 09:24 PM
How much for the mirrors, and the front lip spoiler?

525iT_Feen
01-06-2008, 04:44 AM
How much for the mirrors, and the front lip spoiler?

All that stuff is sold. Sorry.

525iT_Feen
01-20-2008, 02:48 AM
Still have:
- 2 Rear hubs in great shape with BRAND NEW wheel bearings (80 miles to be exact)
- Full intake manifold
- Headers
- Stock cat back in excellent shape
- lolipops with M3 bushings (80 miles on them)
- Trunk hindges
- Tan deadpedal with no cracks
- Tan Armrest console
- Black Armrest
- Center console and dash
- Speedometer w/ 180k aprox
- Various computers/electronics
- 2 front windows
- 2 Hatch windows
- 2 full loaded doors with very minor dents and good original paint.
- etc.

wiggafly808
01-20-2008, 06:11 AM
How much for a rear hub shipped to 96789?

Pics?

PM me please

slamtry
01-22-2008, 01:37 PM
I need the driver's side door lock mechanism (not just the cylinder) and the key that goes with it. Please email me at slamtry@yahoo.com if you have one.

525iT_Feen
01-23-2008, 06:23 PM
I need the driver's side door lock mechanism (not just the cylinder) and the key that goes with it. Please email me at slamtry@yahoo.com if you have one.

Not available. Sorry.

525iT_Feen
03-08-2008, 04:38 PM
Bump.

dejaygo
03-10-2008, 01:42 PM
Interested in the stock cat back and rear hubs? Can you post up some pics of them of send them to me. and how much?

525iT_Feen
03-10-2008, 02:39 PM
Interested in the stock cat back and rear hubs? Can you post up some pics of them of send them to me. and how much?

I'll get you pics tonight.

Mracerxx
03-12-2008, 09:36 AM
Do you still have the kidney grills?

525iT_Feen
03-12-2008, 12:29 PM
Do you still have the kidney grills?

Nope. Sold. Sorry.

e36mpwr
03-12-2008, 06:32 PM
Sorry to see such a clean car go down.

How much for the entire clutch assembly? If you still have it of course!

525iT_Feen
03-12-2008, 07:04 PM
Sorry to see such a clean car go down.

How much for the entire clutch assembly? If you still have it of course!

Give me a day. I sold the block to someone and they were missing the tool to remove the clutch/flywheel and never brought it back. They still owe me it.

e36mpwr
03-12-2008, 07:51 PM
Ok no huge rush, thanks!!!

spankyway
03-13-2008, 11:23 AM
How about the window switches and relays to 30132?

525iT_Feen
03-13-2008, 11:14 PM
How about the window switches and relays to 30132?

No relay. I have the two switches though. PM me.