SOLD
















URI Crank pulley (anodized red) w/ belts for sale.
For the 1996–01 BMW 323 / 325 / 328 / 330 / M3

Pulley and belts are in very good to excellent condition.

Part Numbers
URI Pulley: PN 0202102 Rev A
Gates Belt K060598
Gates Belt K050336

URI sells it new for $217.36 without the belts. This is a non-wear item made of billet aluminum.
Asking $105 shipped.

This mod is good for 10-15 whp on an e36 M3. I ran this mod for over 50k miles (only 10k on these belts) with no adverse affects whatsoever, and the motor ran STRONG.

Please PM me w/ any questions/interest.

I love this mod! Best bang for the buck when paired up with an M50 manifold.

FWIW I have the timing gear so you can use this pulley with any OBD1 e36 (92-95).

Thanks for the bump/help!

BUmp for a good seller.

Thanks

would this pulley effect the amount of power going to my system?..i'm running 3,00W out of the car

bah! wish this was an obd-1 fitment for my 325i. don't forget that this is a killer upgrade for automatics too!

good luck with the sale!

bah! wish this was an obd-1 fitment for my 325i. don't forget that this is a killer upgrade for automatics too!

good luck with the sale!

The only difference with OBD1 and OBD2 is the timing ring. For OBD2 you use your stock timing ring and URI provides a special timing ring for OBD1.

I have the OBD1 timing ring if your really interested. You can buy the pulley from him and the timing ring from me.

$30 shipped for the timing ring..

I have a 99 m3, is everything included that I will need to install the pullies on my car? Also I have heard that pullies have an adverse effect on your engine? Is there any truth to this?

It is just the crank pulley and you can't put other pullies on just the stock ones. A possible effect that I have heard is that with this pulley your Harmonic dampner will be eliminated which protects the crank pulley. Also, you shouldn't do this mod if you have a LTW flywheel.

bah! wish this was an obd-1 fitment for my 325i. don't forget that this is a killer upgrade for automatics too!

good luck with the sale!

Check post #2:
http://forums.bimmerforums.com/forum/showpost.php?p=10403181&postcount=2

With the proper ring, the pulley will work with the OBD-1 motors, too.

I have a 99 m3, is everything included that I will need to install the pullies on my car? Also I have heard that pullies have an adverse effect on your engine? Is there any truth to this?

Yes, everything is included that you will need in order to install this mod on your car.

Some general info on this mod:

It is a single red-anodized CNC'ed billet aluminum pulley that repleces the OE crank pulley. It is MUCH lighter in weight than OE, and of a different size so that it mechanically underdrives the AC, PS, Alt, and WP. 75% of the power gain is said to be obtained via the weight reduction. The amount of underdriving is minimal, and does not affect the function of the car's related systems.

Speculation regarding adverse affects:

Whether there is "truth" to the idea that the mod adversely effects your motor is something you will have to research for yourself and draw your own conclusions about (and please keep your conclusions to yourself, as this thread is a FS thread, not a crank pulley debate thread). Like anyone else on this issue, all I can give you is my OPINION and my EXPERIENCE, as there is no empirical data available.

I think it is the best bang/buck modification for these motors, period. I ran mine for 50K+ miles w/ out issue.

would recommend this mod to anyone. Beats doing the full pulley set-up anyday.

IF IF this is still around after the 1st. I promise you I will buy, for sure

IF IF this is still around after the 1st. I promise you I will buy, for sure


Cool.

IF IF this is still around after the 1st. I promise you I will buy, for sure

Monte you do realize that you cannot use a LTW flywheel and the crank pulley right?

Monte you do realize that you cannot use a LTW flywheel and the crank pulley right?

:( srsly? Any reason why? do they counter act each other?

:( srsly? Any reason why? do they counter act each other?

Racers attempted this combo (ltw fly & CP) many years ago and learned that going with BOTH a LTW flywheel and a LTW crank pulley can result in a broken crank.
The mods are mutually exclusive - one or the other.

Still for sale? I can paypal you right away!! let me know

Sale fell through . . .

Still for sale.

Just sent paypal