well i swaped a m52 into my 325i
and coverted it to OBDI
and installed a m50 intake manifold
but the car wont start now
it cranks but wont kick over i have replaced the cam psotioning sensors and checked every relay and swaped 2 chips and nothing
ive heard its i didnt route the vaccum lines right

ill pay + food and drinks if you can get the car started!


i live in lakewood ca
right by long beach

PM me please

check the oil sending unit plug, the oil sending unit should only have one prong make sure you are using the right plug.

it is one prong

well i swaped a m52 into my 325i
and coverted it to OBDI
and installed a m50 intake manifold
but the car wont start now
it cranks but wont kick over i have replaced the cam psotioning sensors and checked every relay and swaped 2 chips and nothing
ive heard its i didnt route the vaccum lines right

ill pay + food and drinks if you can get the car started!


i live in lakewood ca
right by long beach

PM me please
Cranks but no starting? Is it getting fuel? Spark?