I have a Turner/Conforti chip for the car in stock configuration. Gives a nice gain as a first mod. I also used this with an intake without a problem. - $100

Also have an AA chip configured for intake/exhaust (cat-back, not a track pipe although I'm sure it'd work with it) - $100


Once again these are for the 506 DME (usually pre 1/95 build date), so please double check your DME before buying. Thanks.

Chris

bump it up

emailed you can not PM dont have permission yet

AA chip sold, Conforti still available

Will the turner chip work in a red label 413 ECU?

off the top of my head I don't think it will, but I'll double check for you and let you know if I find out otherwise

Edit: I did a bit of searching and it looks like your red label 413 DME (Non EWS) should be backwards compatable with the 506 chip. It seems the problems between the two DMEs is in relation to the EWS system. Here are a couple threads I looked at.

http://forums.bimmerforums.com/forum/showthread.php?t=550096&highlight=506+chip+413+red+label

note, the information in post 5 in this thread is from NickG who is obviously very knowledgable about this topic.
http://forums.bimmerforums.com/forum/showthread.php?t=669772&highlight=506+chip+413+DME


Just remember that the chip is for a stock configuration S50 M3, so as long as you're using it for that in your non-ews DME, then it should work fine. Let me know if you have any other questions. Thanks.

bump it up

Turner/Conforti chip is sold, MODS could you please lock this? Thanks.