Freshly gone thru DUAL VANOS head...

Disassembled, very well cleaned, pressure tested, very light decking, replaced valve stem seals, checked all valves for trueness, checked spring rates (all within 2%), reassembled - all done Professionally of course... local machine shop specializing in this type of work

Head will fit:
Part 11127514540 (CYLINDER HEAD WITH BEARING LEDGES) was found on the following vehicles:

E39: Details on E39
E39 525i SEDAN
E39 525i TOURING
E39 528i SEDAN
E39 528i TOURING
E39 530i SEDAN

E46: Details on E46
E46 323Ci COUPE
E46 323Ci CONVERTIBLE
E46 323i SEDAN
E46 323i TOURING
E46 325Ci CONVERTIBLE
E46 325Ci COUPE
E46 325i SEDAN
E46 325i TOURING
E46 325xi SEDAN
E46 325xi TOURING
E46 328Ci COUPE
E46 328i SEDAN
E46 330Ci CONVERTIBLE
E46 330Ci COUPE
E46 330i SEDAN
E46 330xi SEDAN

E53: Details on E53
E53 X5 3.0i SUV

E60: Details on E60
E60 525i SEDAN
E60 530i SEDAN

E83: Details on E83
E83 X3 2.5i SUV
E83 X3 3.0i SUV

E85: Details on E85
E85 Z4 2.5i ROADSTER
E85 Z4 3.0i ROADSTER

Z3: Details on Z3
Z3 Z3 2.5 ROADSTER
Z3 Z3 2.5i ROADSTER
Z3 Z3 2.8 ROADSTER
Z3 Z3 2.8 COUPE
Z3 Z3 3.0i COUPE
Z3 Z3 3.0i ROADSTER

have about 5 more picts but can only post 5 at a time... i also have the full res pict if you really need some detail - pm me and i can email you those larger files - $600 SHIPPED

What did it come out of? What does "lite decking" mean? I need a head for a 2000 323i. Looks like this should work?

Thanks,
James

What did it come out of? What does "lite decking" mean? I need a head for a 2000 323i. Looks like this should work?

Thanks,
JamesDecking is "grinding it flat", to correct minor warping. If it's heavily "decked", you need to run a thicker head gasket to compensate for height, but for minor correction, you're ok on a stock gasket.

Sorry, the head was sold a while back.