I have some GC add on coilovers 500lb fronts, 650lb rear springs that i'd like to trade for aftermarket sway bars for a non-M e36. I used them for about a month. Let me know if anyone is interested. I also have some M3 strut housings with koni single adjustable shocks I could sell with the coil over kit. This way you will not have to modify your own strut housing so there will be less down time with your car.

Willing to sell outright and if so how much

Side note: non-m and m3 sway bars are interchangeable.

On the M3 the sway bars attach to the strut housing and on the non-m they attach to the control arm. The bars themselves are the exact same (well minus the radius) so you can just bolt a m3 bar to the control arm and visa versa.

Willing to sell outright and if so how much

Side note: non-m and m3 sway bars are interchangeable.

On the M3 the sway bars attach to the strut housing and on the non-m they attach to the control arm. The bars themselves are the exact same (well minus the radius) so you can just bolt a m3 bar to the control arm and visa versa.

I'd take $450 for the coilovers and the M3/Koni struts. Plus shipping of course.

DIBS pening how many miles on the shocks and struts

thats a good deal. if only i had money id be all over this

Very interested, I suppose I'll say dibs!!

Pending Mileage..
Do I need to get my own rear shocks?
Will this fit e36 m3?

I'll take it if it fits e36 m3.

Paypal?

Very interested, I suppose I'll say dibs!!

Pending Mileage..
Do I need to get my own rear shocks?
Will this fit e36 m3?

I'll take it if it fits e36 m3.

Paypal?

Yes, you will need to supply your own shocks. Using standard length koni single adjustable shocks in the rear, you will need to use the GC tall rear shock mounts to avoid excessive suspension droop in the rear. There is less than 1,000 miles on the springs and about 10,000 miles on the shock. They are not set on the stiffest setting yet they are still very firm. Compression and rebound is very good. In order to get a low drop, you will need to cut off the factory spring perchs off the strut housings.

a low drop? How low can I with it right now as is? How would I cut them off?

And these will fit an m3 right?

a low drop? How low can I with it right now as is? How would I cut them off?

And these will fit an m3 right?

Sale pending with LavaM3

Sale pending with LavaM3

do you know how much i can drop it as is? And do you have pictures?

hey man.. thanks doing business with you .. paypal is sent.