View Full Version : 1993 325IS TURBO M3 Supercar 600+ WHP! MUST SELL
lmndstnd68 05-21-2007, 07:01 PM FOR SALE: 600+ WHP Turbo Bimmer 1993 325IS Complete M3 Swap - 95' M3 Engine (3.0 OBDI), 5 Spd M3 Transmission, M3 Drive shaft, and LSD Differential. ALL WORK DONE PROFESSIONALLY BY CERTIFIED MECHANIC. Motor was rebuilt to ensure boost handling capabilities. Replaced pistons and rings, shaved head, added APR head studs and cometics fat head gasket. Custom made high velocity aluminum intake manifold, 3.5" MAF, Sparco 1000hp Intercooler, 3" turbo back exhaust TOO MUCH TO LIST! MUST SEE! "BLING"- 17" Powder coated M-roadster wheels, Pulled rear fenders out 2.5" to fit wheels, Front Lip Spoiler, Carbon fiber hood, Carbon fiber wing, Carbon fiber badges, Blacked out taillights, corners, grilles, eyelids, 3" inlet titanium muffler, Frnt and Rear Aluminum Tow Hooks, Powder coated valve cover, Frnt and rear strut brace bars, Again too much to list
EMAIL FOR PICS MUST SEE!!! CARDFB63@AOL.COM
Or Ask for SHAUN 330 559 1055
DHSully 05-21-2007, 08:40 PM how much?
zero388 05-21-2007, 08:43 PM send pics to zero3418@yahoo.com please. and how many miles are on the car?
lmndstnd68 05-21-2007, 09:31 PM $13,000 firm car has 17x,xxx
Motor had around 50k when purchased (before worked on)
UKRSTI 05-21-2007, 09:36 PM Seems like a lot of car for 13K. Can't wait until somebody posts pics.
lmndstnd68 05-21-2007, 10:10 PM Apparently i cannot post pics so if anyone that i emailed them to wouldnt mind posting them up for me i would greatly appreciate it. Thanks
zero388 05-21-2007, 10:13 PM thanks for the pics i would post them but i dont have enough posts yet.
KarlSpackler 05-21-2007, 10:38 PM send them to
thefutureofgolf@aol.com
Also, what turbo are you running?
DEFKON99 05-21-2007, 10:47 PM someone post piks !
jflip2002 05-21-2007, 11:20 PM 3 posts, and a killer deal. Im calling bullshit on this one.
lmndstnd68 05-21-2007, 11:24 PM As for the turbo: It is a ball bearing ebay turbo that cost around $700. I was criticized for it being an ebay turbo so i purchased a precision SC34 ball bearing turbo to replace it. I only had the precision on it for a week, it lacked the power and smoothness of the ebay one. Ill post the trims tomorow
lmndstnd68 05-21-2007, 11:29 PM Then youre welcome to leave the thread. This thread is for serious inquires only. If i could post pics i would be sitting on the hood giving u the "one finger salute" while smiling :)
vibes 05-21-2007, 11:48 PM So your saying the turbo is basically crap, and you have a bunch of M3 stuff into your car? Its still a 93 with 170k miles!
I'm not trying to offend you, but your lucky to get 10k for it.
jflip2002 05-21-2007, 11:54 PM lol.
series 05-21-2007, 11:55 PM Bull No Pics>
lmndstnd68 05-22-2007, 12:27 AM I have more into my turbo setup then your car is worth my friend. And didnt mommy ever teach you if you dont have anythin nice to say then to not say anything at all? Ive had offers of 14k before but didnt want to take that kinda loss. The only reason im sellin it now is cuz i need to pay my tuition. And if you dont know about turbos then keep your mouth shut. Have a great night.
vibes 05-22-2007, 01:33 AM I think your going to have a difficult time selling your car with that attitude.
I was only trying to give you helpful advice.
Have a nice day.
sogood 05-22-2007, 02:07 AM Send me pictures I will host them
chris.katana@gmail.com
UKRSTI 05-22-2007, 07:03 AM I think your going to have a difficult time selling your car with that attitude.
I was only trying to give you helpful advice.
Have a nice day.
You're kidding right? You called his mods crap and expect him to say thank you?
Was there any suspension work or brake upgrades? Also waiting to see the pics. Thanks.
lmndstnd68 05-22-2007, 01:15 PM It has bilstein HD shocks in the rear and no brake upgrade.
And to "vibes"- Why are u even on here? Only people who may be interested or are curious should post.
lmndstnd68 05-22-2007, 01:21 PM i sent the pics to Sogood as he requested. hopefully they'll be up here very soon.
And i dont mean to sound like i have an attitude. This car has been my life and I just have so much money and an unbelievable amount of time into this car and for some ignorant, jealous sounding person to shut it down like that... I dont know... But i would like to apologize to everyone else on here.
sogood 05-22-2007, 01:27 PM http://img509.imageshack.us/img509/4265/2pnbwxznhcbf1arnlogijnuvn3.jpg
http://img509.imageshack.us/img509/5033/aa5ecouz9euynofkn5suszwpu1.jpg
http://img404.imageshack.us/img404/3747/noce1ieklq7w6l2doxx3wd8sq9.jpg
http://img522.imageshack.us/img522/3337/rl6kuax3bcpmlxjksndbkvnmi4.jpg
wrecked99m3 05-22-2007, 02:09 PM the power is nice and all, but wow i dont know about the looks of that car. good luck with the sale
Werked323is 05-22-2007, 02:11 PM http://img522.imageshack.us/img522/3337/rl6kuax3bcpmlxjksndbkvnmi4.jpg[/QUOTE]
the power is nice and all, but wow i dont know about the looks of that car. good luck with the sale
not a fan of the exaust
FastAlpine 05-22-2007, 02:14 PM Wow amazing car my friend, i love it.
BMVV4Life 05-22-2007, 02:15 PM http://img522.imageshack.us/img522/3337/rl6kuax3bcpmlxjksndbkvnmi4.jpg
not a fan of the exaust[/quote]
+1 for the exhaust. other than that sweet bat mobile!
lmndstnd68 05-22-2007, 02:33 PM But again i am not posting my car on here for peoples opinions. It is for sale, thus if u dont want it dont look at it. Would you call adds in the newspaper to tell the seller you didnt like this or that on whatever he would be selling? didnt think so
sogood 05-22-2007, 02:34 PM That exhaust serves a purpose on a 600whp car. Function over form.
luv4myE36 05-22-2007, 02:39 PM can we get specs on the full turbo kit. hard parts, fueling electronics driveline etc?
That exhaust serves a purpose on a 600whp car. Function over form.
i must second that nice car
badbimmer1984 05-22-2007, 05:13 PM i honestly doubt he knows anything about his turbo set-up or much else specific about that engine as he bought it pre-turbo'd out of a real M3 (white one) . you have any dyno plots for this acclaim'd 600whp? you selling the M roadster too or is that already long gone. oh and please don't tell me you/your shop w/e are the ones that did the work.
pancho///m3 05-22-2007, 05:50 PM sooooooo many haters on the forum............ good luck with the sale.... nice bar btw
MarkAidan 05-22-2007, 07:28 PM Not a hater, but I DEFINATELY need to see the sheets to before I believe it has anywhere close to 600+ hp! :confused
As far as opinions go, you're getting them whether you approve or not... that's just how it goes in here my friend.
G/L with the sale!
3LtrdakarM3 05-22-2007, 07:51 PM sick car but i would go with the Eisenmann or the AC schnitzer exhaust it sounds alot more exotic but not dissing yours just makeing a suggestion
badbimmer1984 05-22-2007, 09:24 PM i'm not a hater (I loved that bmw (engine) when it was in the white m3). as far as i know he has never had this car on a dyno, and has no idea what this turbo is. again i am not a hater just don't wanna see someone get screwed cause this guy doesn't know what he's talking about. he charged a friend of mine a couple grand to drop another engine in his car (shuan incase ur not sure yet i'm talking about Jason and his lancer) he welded the manifold to the turbo and turbo to the exhaust, said he was going to put a better HG on it (pretty sure he didn't), and never got the turbo balanced (yes its a turbo Fwd lancer) and now the car burns oil through the turbo like the car was on fire. for anyone interested i would just look into this car alot more before jumping on this "sweet" deal. i really don't wanna see anyone get screwed. but what would be nice is actually give us all some specs on this car. what kind of internals were used on it. what brand of parts were used? and last i heard as well that was an ebay I/C (btw sparco makes seats not I/C's) as well huh. if you can prove me wrong show us a dyno plot of this car putting down over 600whp, and give alittle more detail about this car i'll remove all my comments.
BMWmotorsports 05-22-2007, 10:57 PM wow you have a riced out fast 325is there could have done a little more oem upgrades for looks but i speak for everyone when i say we would love to see dyno sheets; without them your acclaimed 600hp is nothing and will get you nowhere..
in any note though cool car good luck with the sell/
Camoflash 05-23-2007, 12:18 AM Am i crazy or does anyone else think that those photos looks somewhat photoshopped?
:think:
KetteringTi 05-23-2007, 01:06 AM I think he meant Spearco.
twisted69 05-26-2007, 01:14 PM I like what you did with the rears on fitting the M Coupe rims. Did you pull the fenders or roll them?
bigjetmech 05-26-2007, 02:28 PM very unique and aggressive look!
JohnDojah 05-26-2007, 04:55 PM i'm not a hater (I loved that bmw (engine) when it was in the white m3). as far as i know he has never had this car on a dyno, and has no idea what this turbo is. again i am not a hater just don't wanna see someone get screwed cause this guy doesn't know what he's talking about. he charged a friend of mine a couple grand to drop another engine in his car (shuan incase ur not sure yet i'm talking about Jason and his lancer) he welded the manifold to the turbo and turbo to the exhaust, said he was going to put a better HG on it (pretty sure he didn't), and never got the turbo balanced (yes its a turbo Fwd lancer) and now the car burns oil through the turbo like the car was on fire. for anyone interested i would just look into this car alot more before jumping on this "sweet" deal. i really don't wanna see anyone get screwed. but what would be nice is actually give us all some specs on this car. what kind of internals were used on it. what brand of parts were used? and last i heard as well that was an ebay I/C (btw sparco makes seats not I/C's) as well huh. if you can prove me wrong show us a dyno plot of this car putting down over 600whp, and give alittle more detail about this car i'll remove all my comments.what?:confused
1lo///m3 06-05-2007, 05:46 PM i'm not a hater (I loved that bmw (engine) when it was in the white m3). as far as i know he has never had this car on a dyno, and has no idea what this turbo is. again i am not a hater just don't wanna see someone get screwed cause this guy doesn't know what he's talking about. he charged a friend of mine a couple grand to drop another engine in his car (shuan incase ur not sure yet i'm talking about Jason and his lancer) he welded the manifold to the turbo and turbo to the exhaust, said he was going to put a better HG on it (pretty sure he didn't), and never got the turbo balanced (yes its a turbo Fwd lancer) and now the car burns oil through the turbo like the car was on fire. for anyone interested i would just look into this car alot more before jumping on this "sweet" deal. i really don't wanna see anyone get screwed. but what would be nice is actually give us all some specs on this car. what kind of internals were used on it. what brand of parts were used? and last i heard as well that was an ebay I/C (btw sparco makes seats not I/C's) as well huh. if you can prove me wrong show us a dyno plot of this car putting down over 600whp, and give alittle more detail about this car i'll remove all my comments.
wrong shawn asshat
i dont know who you are but you dont know shit, all i did to jasons car was swap motors change the headgasket(and yes its definately been changed but you wouldnt know because you dont know shit) and rebuild the turbo with some junk ass rebuild kit HE GAVE ME. when it left it wasnt smoking so its not my fault he gave me junk parts to put in it. there was never any deal about getting the turbo balanced becuase i told him i couldnt. ebay intercooler .... no thats a $900 spearco unit
nice 87 735 jerkoff
S50 Leefa 06-05-2007, 07:35 PM No offense, but
Thats disgusting. Period.
socerace 06-05-2007, 08:04 PM No offense, but
Thats disgusting. Period.
cant help but say +1
yea fool, fyi this is a pretty big board and everyone browses for sale threads and comments on everything. a lot of people would say your car is tasteless b/c well some of it looks poorly done up.
plus your attitude isnt very convincing of a motivated seller. dont expect sunshine and rainbows for comments b/c everyone has a different opinion about cars. instead of name calling and throwing out slurs why dont you just post up some pics of the proven horse power and all the upgrades done to your car? post a complete for sale thread, dont make random hp claims ending with " too many upgrades to list" if youre amateur at posting f/s threads read some good ones. just some advice next time you sell a car.
badbimmer1984 06-05-2007, 08:22 PM he changed his mind about selling it he got too many people interested so he is gonna hold it then jack up the price and try again later.
adriver 06-07-2007, 08:27 PM I wouldnt say pchopped, it just looks painted with a rattle can.
especially those bumpers.
New rims, repaint the bumpers, completely debadge, paint or remove the hooks, tint, get rid of that windshield sticker, new taillights, and no matter what you say that looks like a cheap knockoff exhaust. Fix that and youll get your price guaranteed.
Either way good luck.
sausrigging 06-08-2007, 12:32 AM God some of you people suck!
God some of you people suck!
So true. It's like this all day everyday on this forum. Lots of good stuff and info but you gotta dig through a thick layer of shit. Wish people would think twice before posting.
Who cares that 'werked323is' doesn't like the exhaust ? Just STFU.
If your car differs from what's cool to the popular kids , better put your flame suit on.
97m3john 06-08-2007, 02:14 AM So true. It's like this all day everyday on this forum. Lots of good stuff and info but you gotta dig through a thick layer of shit. Wish people would think twice before posting.
Who cares that 'werked323is' doesn't like the exhaust ? Just STFU.
If your car differs from what's cool to the popular kids , better put your flame suit on.
+1
Blackedout325i 07-19-2007, 12:57 AM im a flamer too
jflip2002 07-19-2007, 01:05 AM Take the ebay tails and exhaust off. Take that fuckin wire down, r unning all around your dash, and paint the blue on the engine black or something. Then youd have a car that would almost be presentable, after removing the M badge, and rear wing.
Next time remember, with classy cars... Less = More
1bad m3 07-19-2007, 03:03 AM That turbo hasnt melted the engine cover? it looks like alot of time and money went in to it ... and im interested after a dyno with AFR and a PPI from a reputable shop .. im looking for a turbo m3 but this might do...I have plent of money and im not just talkin outa my ass.... With a weekends worth of work, some powdercoating, new exhaust and tails this could be a car I would like... for the price its a good deal even if its not visually pleasing to everyone. It SEEMS like a lot of work has went in to it... do you have reciepts for all the work/ parts ... nothing against you but its easy to say the motor has been rebuilt with this and this ... but its difficult to actually prove it or inspect it before you buy.
Mervon 07-19-2007, 03:08 AM your all little girls and bitch too much, its kinda funny tho...
///M3Augy 07-19-2007, 09:09 AM your all little girls and bitch too much, its kinda funny tho...
LOL.
m3chaser 07-19-2007, 10:13 AM even if the turbo did suck, couldn't you just buy another turbo for it and have someone like NickG tune it for you? I don't know much about FI, but that car doesn't look bad and seems like it has potential.
Good luck with the sale.
|