Does anybody here know of a good light weight alloy wheel that will fit my E39 with a 74.1mm center bore???
Thank you guys for all the help!!!
Jason

I have a set of Enkei NT03+M that I'd like to sell. Being the newbie here on this forum I am not sure if I can post FS messages.....that's why I haven't posted it yet. (you know I don't want to start off on the wrong foot.)

The I will also post pics if interested. Thanks, Joe

Hey Joe,
Thanks for the reply!
I am not sure that your wheels will fit....
I need a 74.1mm center bore and offsets 15mm front, 25mm rear...
But, Please email me the pictures!

OK, here's are some LTW wheels I found, but they require spacers...
Does anybody know what size spacers I need for these wheels at Turner Motorsports;
LTW5 Lightweight Alloy Race Wheel 17 x 9 - Part #: LTW517x9A
http://www.turnermotorsport.com/html...T_ID=LTW517x9A


These are drilled to 74mm with a 41mm offset 16.6lbs
http://www.turnermotorsport.com/image/wheels/wheels_ltw5_lg.jpg

Thank you!
Jason
Jasonharlan@hawaii.rr.com
Jharlan@khma.com


I have a set of Enkei NT03+M that I'd like to sell. Being the newbie here on this forum I am not sure if I can post FS messages.....that's why I haven't posted it yet. (you know I don't want to start off on the wrong foot.)

The Enkei's were purchased for my E36 but did not fit because of the Center Hub diameter was 3.3mm too small. A local shop here in Seattle offered to bore out the center hub (metal ring insert) for $20 ea.
The wheels are 18x8.5, 38mm offset, 19.6lbs ea(!) Used for two track (race) sessions mounted on an Acura RL awd endurance car. These wheels are fairly expensive new (about $350 for the 17") but if you are interested please let me know and I will give you a very good deal. (I sold my E36 last week, no need for wheels) I will also post pics if interested. Thanks, Joe

unable to post pics here, but sending you an email.

I don't think I'd put those LTW5s on a heavy E39. I have them, but for track only.