BBS RA 15" x 7" ET 25

Silver with a machined lip. Been recently refinished, don't know if they were even run on a car, the backs of the wheel are still near perfect. ONE flaw, looks like some goof hit the face with an impact wrench. Pictures show details.

Tires are in great condition despite being a few years old. These were stored in a climate controlled garage, there are no cracks or signs of dry rot on the tires at all. There are even still the little rubber nipples sticking off the sides. TONS of tread, size is 225/50-15.

http://i5.photobucket.com/albums/y161/notoriousracing/BBS%20RA/4.jpg

http://i5.photobucket.com/albums/y161/notoriousracing/BBS%20RA/3.jpg

http://i5.photobucket.com/albums/y161/notoriousracing/BBS%20RA/2.jpg

http://i5.photobucket.com/albums/y161/notoriousracing/BBS%20RA/1.jpg

I'll check back to see if you sold them by June 1st. :D

Your sure by the numbers on the hub 15x7J for all four?

thanks

With that offset will these clear the tire rods in the front or are spacers required?

Where did you get these rims?

With that offset will these clear the tire rods in the front or are spacers required?

Where did you get these rims?

Nope. You'll need at least 10mm spacers for them to fit on an e21.

yeah you'll need 10mm spacers
sometimes you still have to grind off the tie rod end a little:D
aftermarket tie rods are bigger, and the stock lemforders are small with better quality
I have 2 sets of the 10mm H&Rs, they are hubcentric.

My RAs are ET13? last I can remember, so where did these wheels come from?

.

My RAs are ET13? last I can remember, so where did these wheels come from?

Same here, my RA's are ET 13. Also 225 is damn wide to fit on an E21.

Oh my, lord. Nice set of wheels and a great price at that! 225 will not fit on the fronts of our cars tho. Just to inform the buyer.

yeah you'll need 10mm spacers
sometimes you still have to grind off the tie rod end a little:D
aftermarket tie rods are bigger, and the stock lemforders are small with better quality
I have 2 sets of the 10mm H&Rs, they are hubcentric.

My RAs are ET13? last I can remember, so where did these wheels come from?

I was figuring between a 5mm and 10mm spacer to fit these and the front will be close. If Jody says 10mm, it's 10mm :D

I'm still deciding to sell them or not, my price is firm, these would look DAMN good on my e30, and they were designed for one originally. The e30 euro weaves are 15x7 ET 24/25, but they don't have that gorgeous lip!

I have a confession, these are listed on e30 forums as well, though for a much higher price, I want to see these on an e21! When I had mine, these were my dream wheels, only about 1 1/2 years too late......

Jody if you are serious, I would be happy to hold them for you, I have absorbed lot of knowledge from you and would be proud to have them on your car.

by all means don't wait on me dude:)

i've got one to many irons in the fire right now, but i'm seeing if I can shift some things around
I really dont need them, but i'm like a pack rat with car parts.
ya know how these things go...my M3 has priority:firedevil

by all means don't wait on me dude:)

i've got one to many irons in the fire right now, but i'm seeing if I can shift some things around
I really dont need them, but i'm like a pack rat with car parts.
ya know how these things go...my M3 has priority:firedevil

Well having a 88 M3 in Diamondschwarz, I can understand :devillook

Though personally, I think these would look much better on an e21 than a 325....

Wheels are not sold!

Come get em :D

Hey could you add me to msn or email me if you could wait and sell the rims and tires to me on thursday i get payed and i realy would like them for my car