this is a european spec cluster from a 3.0 e36 m3. it came from england as they still use mph. i'm asking $300 for it :). i also have my original front half of my own m3 cluster for sale.....i'm not too sure what the interest/going rate would be on that

http://i62.photobucket.com/albums/h103/porschetech/DSC_0136.jpg

bump for a good guy.

What do you mean on the front half? The clear plastic part...cause I'd be interested.

What do you mean on the front half? The clear plastic part...cause I'd be interested.
the complete front section. the clear housing and dials/gauges

How hard would an install to a Us spec car be? Would I need to wire a sensor to the cluster for the oil temp? Also, how many miles are read on this cluster.

How hard would an install to a Us spec car be? Would I need to wire a sensor to the cluster for the oil temp? Also, how many miles are read on this cluster.
easy......i had another cluster and done mine today. you split them and then you use your original half. i'll be doing the oil temp conversion at a later date.

http://i62.photobucket.com/albums/h103/porschetech/DSC_0123-2.jpg

http://i62.photobucket.com/albums/h103/porschetech/DSC_0125-1.jpg

What's the p/n, got a 3.2, this prob won't work will it? And what's the mileage at?

im interesting in the front half part that you have..can u send me some pictures or u can post it on here..so i can check it out..and also how much would you sell for it?? is it in a working conditions?? does all the needles works?? please let me know thanks..

kris..

What's the p/n, got a 3.2, this prob won't work will it? And what's the mileage at?
yeah it will work......the only difference between a 3.0 and a 3.2 euro cluster is the redline band (i think).....i'm sure vitolo may correct me on that:)

im interesting in the front half part that you have..can u send me some pictures or u can post it on here..so i can check it out..and also how much would you sell for it?? is it in a working conditions?? does all the needles works?? please let me know thanks..

kris..
i'll try to take pics tomorrow......yeps it all works. i just swapped em out today

Quick question, will the actual mileage be portrayed for the car, or is the mileage on the cluster? So to say, if I swap it out, will it show my mileage or the cluster's mileage?

The Euro 3 and 3.2 are interchangable...

The one youre selling has the oil temp in deg F, mines in C :(... My redline starts at 7500 though :D (even though my motor doesnt spin that high haha)

http://i62.photobucket.com/albums/h103/porschetech/DSC_0123-2.jpg

http://i62.photobucket.com/albums/h103/porschetech/DSC_0125-1.jpg
you weren't kidding when you said you got a 'new' steering wheel - that looks incredible... PM me where/how much you got it for? you just made me interested..

any news for the one that you took off?? please let me know thanks..

kris..

ay ant,

i didn't even think about it, but you said you were also selling a front half? I need to get rid of these white overlays. How much for the front half?

here's my original one carlos............pics didn't come out perfect:(

http://i62.photobucket.com/albums/h103/porschetech/DSC_0150.jpg

http://i62.photobucket.com/albums/h103/porschetech/DSC_0149.jpg

how much are u selling this for?? please let me know thanks..

kris..

seems like i got competition for this part.....

oh well... i'll just wait for a euro cluster....

I am interested in this cluster, but need to know if my actual mileage will show on the new cluster or will it carry over the mileage from the car it was takin out of?

I am interested in this cluster, but need to know if my actual mileage will show on the new cluster or will it carry over the mileage from the car it was takin out of?

The readout will always be the mileage on the cluster, not the car. So, if you have a cluster, whatever car you put that particular cluster into, the mileage will alwyas read the same. There are software/hardware packages on ebay that allow you to change the mileage on the cluster itself. I've never used one, but I hear they work fine if you know how to use it.

The readout will always be the mileage on the cluster, not the car. So, if you have a cluster, whatever car you put that particular cluster into, the mileage will alwyas read the same. There are software/hardware packages on ebay that allow you to change the mileage on the cluster itself. I've never used one, but I hear they work fine if you know how to use it.

Actually, I remember reading another thread about this a long time ago and that it is possible to get your car's mileage onto the cluster. If I remember correctly, it involves swapping your coding plug from your existing cluster into the Euro cluster and then a set of steps involving the OBC. I'm sure Porschetech can chime in on this one. I may be wrong, but I'm almost definite that I've seen or read it being done before. Also, I believe the mileage on the Euro cluster must be LOWER than your current mileage. Hope this helps!

http://forums.bimmerforums.com/forum/showthread.php?t=347429
http://www.bmw-m.net/TechProc/test.htm
http://forums.bimmerforums.com/forum/showthread.php?t=340444
Check Post #8-10

Actually, I remember reading another thread about this a long time ago and that it is possible to get your car's mileage onto the cluster. If I remember correctly, it involves swapping your coding plug from your existing cluster into the Euro cluster and then a set of steps involving the OBC. I'm sure Porschetech can chime in on this one. I may be wrong, but I'm almost definite that I've seen or read it being done before. Also, I believe the mileage on the Euro cluster must be LOWER than your current mileage. Hope this helps!

http://forums.bimmerforums.com/forum/showthread.php?t=347429
http://www.bmw-m.net/TechProc/test.htm
http://forums.bimmerforums.com/forum/showthread.php?t=340444
Check Post #8-10

Thanks M3Ric. I appreciate the info. I had no idea that was possible. I'll be checking out those links with the hopes of making it happen.

Thanks again for the info! :buttrock

well i just actually swapped over the rear portion of my original cluster and screwed it onto the euro front section. everything works fine to me so far :)

hay wazup anthony..the cluster work perfectly on my car..i just did the same thing you said and it work fine..thanks for the great oem cluster..and you got a nice car and nice interior..bump for a great seller and cool guy..thanks man..

kris..

hay wazup anthony..the cluster work perfectly on my car..i just did the same thing you said and it work fine..thanks for the great oem cluster..and you got a nice car and nice interior..bump for a great seller and cool guy..thanks man..

kris..

no worries kris....i was happy that i could have helped out.

thanks for the comments:D..............see ya at some meets hopefully. get that bodywork sorted though

Do you still have it and how much.