Edit: Upon research looks like my price was a little high.

This is a Powerdyne based supercharger. It is currently installed in my car. I have decided to go a different direction so off it goes. This kit will be complete with the ECU. I can not make any guarantees that the ECU will work in your vehicle. It is currently installed in my 99 M3. I was planning on sending the Unit for rebuild but decided to remove the whole kit. Kit makes 5.5 psi to my guage.

$2500/OBO



I will be removing this from my car this week or next week and will post pics the components.

http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1335.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1337.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1338.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1339.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1340.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1341.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1342.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1343.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1344.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/DCP_1346.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/100_1174.jpg
http://i5.photobucket.com/albums/y162/99M3Riverside/e36%20M3/100_1171.jpg

bump

Bump, need to sell this.

How much boost is this setup capable of making? Do you know what kind of power you are/were putting down? Did you use aftermarket injectors?

My boost guage would hit around 5.5psi. I have heard of people going up to 9psi. You would want to rebuild with ceramic bearings and wider belt. www.superchargerrebuilds.com.

The kit is complete, including injectors and ecu. You would need to align your car to the ecu.

since it needs rebuilding how about 1500 shipped?

pm me if interested

cash in hand

Way to low, would not consider that.

Way to low, would not consider that.

im not trying to low ball you, but you still have 2 spend a bit of money to rebuild it to make it run 100%

if you change your mind just pm me

im not trying to low ball you, but you still have 2 spend a bit of money to rebuild it to make it run 100%

if you change your mind just pm me

the rebuild is not $1000..

if it is a complete kit, and the sw will work for your car, then $2500 is a good deal

Good luck with the sale

~Chase

Tentative Sale

the rebuild is not $1000..

if it is a complete kit, and the sw will work for your car, then $2500 is a good deal

Good luck with the sale

~Chase

oh yeah....... how much is a new ecu tunned for the car? dont forget that

oh yeah....... how much is a new ecu tunned for the car? dont forget that


It comes with it:) When I said complete kit, I meant it.

Edit: Upon research looks like my price was a little high.

This kit will be complete with the ECU. I can not make any guarantees that the ECU will work in your vehicle. $2500/OBO



I will be removing this from my car this week or next week and will post pics the components.

http://i5.photobucket.com/albums/y162/99M3Riverside/100_1171.jpg

http://i5.photobucket.com/albums/y162/99M3Riverside/100_1174.jpg


so why do you say that the ecu might not work?

like i said if you change your mind pm me

This kit will be complete with the ECU.

oh yeah....... how much is a new ecu tunned for the car? dont forget that

;)

;)

reread his post........................
;)

yeah...he is including sw from a 99 m3.....so any m3 from 96-99.

What was the car putting down HP wise?

I was putting down around 270rwhp

will this work for a 95 m3

Yes, however the ECU would not work and you would have to buy software.

There is a pending sale. I should know on Saturday.

btw, what is the red tubing in the engine bay for?

^^^The stock tubing was looking pretty bad. I got this to replace it. It does not deform like the other piping.

Still for sale, waiting for other person to come up with money.

Still for sale, waiting for other person to come up with money.
believe me, im trying somethingelse every day.:(

my offer still stands pm me if interested

Bump

Im very interested. If i wanted to turn that boost up a little bit, what would i have to do? (FI noob)

I have heard of people running upto 9psi on the Powerdyne. It would be recommended with the rebuild that you go with ceramic bearings and the wider kevlar belt. The other issue with increasing boost is increased heat, this is were water injection or an RMS aftercooler come in.

Ok so. I am officially out for the count on this kit. I couldnt get financed.:(

so this is a non intercooled kit?

This is not oil cooled, nor does it have an aftercooler.

Do you have the CARB sticker?

Do you have the CARB sticker?

Yes I do, It can't be stuck back on. It came off in one piece with a heat gun.

bump

Pics not working for me can you send to glockrocks@sbcglobal.net, tia

Just so you know these setups regurarly go for 3K + on Ebay, I personaly sold mine for 3600 and it didnt have the ECU. Maybe that should be your next option.

That is a good idea. I have only purchased from e-bay, never sold.

is 2500 firm?

thanks!

I don't plan on moving far from that number. I think with the software and ECU it is still a pretty good deal.

would this work on a '99 323is. I have Dinan software on it right now, but I did not know if the ECU would not let it run

super price, only £1200 @ todays rate..... I need a kit too, just have no money at the moment. Good Luck with the sale!

would this work on a '99 323is. I have Dinan software on it right now, but I did not know if the ECU would not let it run

I belive yours is an e46 platform. My bet is it would not work. Someone else might be able to better answer this.

Would this work on a 2000 M Roadster? I'm not sure if the ECU would need any changes.

still for sale? if so, once i close on my house, i'll recheck my finances and get back to you.

It is sold