BimmerDawg
05-14-2007, 11:38 AM
Looking for a full set (front, sides, rears) so I can sell my OE clears. Or, if you have ambers and want to trade for clears + $150 I can make that happen too.
Thanks! :wave
Thanks! :wave
|
View Full Version : Anyone have <'96 E36 Coupe Ambers available? BimmerDawg 05-14-2007, 11:38 AM Looking for a full set (front, sides, rears) so I can sell my OE clears. Or, if you have ambers and want to trade for clears + $150 I can make that happen too. Thanks! :wave 2ruble 05-14-2007, 11:41 AM now is that pre 96 or post 96? BimmerDawg 05-14-2007, 11:47 AM Pre '96 for The Green Bean. redefinedM3 05-14-2007, 11:58 AM I have corners and sides but no tails. lmk tpattison 05-14-2007, 12:00 PM now is that pre 96 or post 96? "<96" means before or less than, so a marginally intelligent person would deduce it to mean pre-96. As Rachael would say; I'm not saying, I'm just saying. Wow, If this is the education our kids are getting these days we're doomed. BimmerDawg 05-14-2007, 12:01 PM I have corners and sides but no tails. lmk How much ya want? 2ruble 05-14-2007, 12:02 PM I've got a stock 93 318is, all the corners and everything are there.... 2ruble 05-14-2007, 12:04 PM "<96" means before or less than, so a marginally intelligent person would deduce it to mean pre-96. As Rachael would say; I'm not saying, I'm just saying. Wow, If this is the education our kids are getting these days we're doomed. I knew it did, I was just making sure that Geordie picked the right one... my bad... zeit00 05-14-2007, 12:04 PM "<96" means before or less than, so a marginally intelligent person would deduce it to mean pre-96. As Rachael would say; I'm not saying, I'm just saying. Wow, If this is the education our kids are getting these days we're doomed. I guess I shall explain it the way I was taught. Its an alligator mouth, it only eats the larger number. 2ruble 05-14-2007, 12:05 PM cute carl tpattison 05-14-2007, 12:06 PM I knew it did, I was just making sure that Geordie picked the right one... my bad... You are doubting that Geordie knew what he meant? WOW that's like doubting DW knows how to P-Chop, or Bill knows how to swindle people since he's a lawyer, or that ATG and Lee know how to get drunk. It just doesn't make sense. :eyecrazy tpattison 05-14-2007, 12:08 PM I guess I shall explain it the way I was taught. Its an alligator mouth, it only eats the larger number. :rofl: Ahhh the glories that are the GA Education System! LMAO I learned the same way back in the 70s. cute carl :confused Damn boy, you must hang out with Halston. BTW it's Karl not Carl. He's a sensitive Kraut when it comes to his name. Boozie D. Clown 05-14-2007, 12:09 PM Kute Karl Fixed. and there's nothing cute about him. 2ruble 05-14-2007, 12:09 PM Not doubting he knew what he meant, no implications were intended... mass apology... I'm sorry for seemingly doubting Geordie and his knowledge of the keyboard... I guess I just suck at life and should go end it now? tpattison 05-14-2007, 12:13 PM Not doubting he knew what he meant, no implications were intended... mass apology... I'm sorry for seemingly doubting Geordie and his knowledge of the keyboard... I guess I just suck at life and should go end now? Yes! :alright :redspot Just don't screw it up or chicken out. 2ruble 05-14-2007, 12:15 PM Heh, maybe I should just come over and let you do it then huh? Then you can stick me in the trunk with all the dead hookers... tpattison 05-14-2007, 12:18 PM Heh, maybe I should just come over and let you do it then huh? Then you can stick me in the trunk with all the dead hookers... Sounds like a plan! I'm available anytime today before 5PM and after 9PM. Otherwise it'll have to wait until Friday. You could always come out to the Cookout and we can make an event out of it! It'd be a blast! :buttrock 2ruble 05-14-2007, 12:23 PM Awesome, sounds good... I'll clear my schedule for the weekend and go ahead and quit work, that way there won't be any responsiblities left after you relieve me and everyone else of my wasted existence... :D But I would very much like to have one of your so well spoken of steaks before I die... If that's at all possible tpattison 05-14-2007, 12:25 PM Awesome, sounds good... I'll clear my schedule for the weekend and go ahead and quit work, that way there won't be any responsiblities left after you relieve me and everyone else of my wasted existence... :D But I would very much like to have one of your so well spoken of steaks before I die... If that's at all possible Every condemned man gets a last meal. Come on out Saturday. Only deal is you have to provide the steak. We'll do the cooking for you. While you wait on it to be cooked you can play with the dogs out back. :D zeit00 05-14-2007, 12:26 PM Fixed. and there's nothing cute about him. ;) tpattison 05-14-2007, 12:27 PM ;) :rofl: 2ruble 05-14-2007, 12:28 PM Nifty, sounds good, I'll try to make something happen... have to go act like I'm working now... at least for a little bit... tpattison 05-14-2007, 12:33 PM Nifty, sounds good, I'll try to make something happen... have to go act like I'm working now... at least for a little bit... :buttrock :buttrock BimmerDawg 05-14-2007, 12:49 PM I've got a stock 93 318is, all the corners and everything are there.... Price? You want clears? 2ruble 05-14-2007, 01:20 PM I'm sure clears would look good on a black e36... you say you want $150 plus mine for your clears? Which clears? Include tails? BimmerDawg 05-14-2007, 01:34 PM I'm sure clears would look good on a black e36... you say you want $150 plus mine for your clears? Which clears? Include tails? Yep. All around. 2ruble 05-14-2007, 01:37 PM Ooops, I just walked outside, I don't have the side markers... The fronts and rears are ok... I guess you would need to keep the sides then huh? Thomas might have a couple at the shop that he doesn't need, and wouldn't mind too badly getting rid of (the side markers) BimmerDawg 05-14-2007, 02:09 PM Ooops, I just walked outside, I don't have the side markers... The fronts and rears are ok... I guess you would need to keep the sides then huh? Thomas might have a couple at the shop that he doesn't need, and wouldn't mind too badly getting rid of (the side markers) Duh, I knew that. Sidemarkers began in 1995 models. So yeah, we can do just the front and rears if ya want. 2ruble 05-14-2007, 02:12 PM Yeah that's fine... but like I said, I might be able to convince Thomas to give up the sidemarkers I know he has sitting upstairs, that way you can have some, and then I can just put them on my car later... anyway, yeah, so it's tails and turns? or tails, turns and headlights? (whether we do sidemarkers or not) BimmerDawg 05-14-2007, 02:17 PM Yeah that's fine... but like I said, I might be able to convince Thomas to give up the sidemarkers I know he has sitting upstairs, that way you can have some, and then I can just put them on my car later... anyway, yeah, so it's tails and turns? or tails, turns and headlights? (whether we do sidemarkers or not) No headlights, just front corners and rears. dos Santos 05-14-2007, 02:24 PM Geordie, you can have my amber tails for free. 2ruble 05-14-2007, 02:25 PM yeah that's fine... When you want to switch? And you want the amber sides? BimmerDawg 05-14-2007, 02:41 PM yeah that's fine... When you want to switch? And you want the amber sides? Whenever. The car stays at work, so whenever works for you. 2ruble 05-14-2007, 02:45 PM Ok, sounds good, I talked to Thomas and he says cool about the side markers, so if you want it might be Thursday if that's cool... I'll need to take the car to Dean's for an alignment anyway, and I have to pass Butler to get there. Anyway, so $150, and corners, sides, and tails... sounds good... BimmerDawg 05-14-2007, 03:01 PM I'll need to take the car to Dean's for an alignment anyway... We do alignments...:shifty 2ruble 05-14-2007, 03:10 PM Uhh... then I might go ahead and do it there... BimmerDawg 05-14-2007, 03:26 PM Uhh... then I might go ahead and do it there... Either way's cool, but my tech aligns prolly three-four e36s/week and a coupla e30s/month from the Bf.c GA crowd. Just did Robstah's tie rods, camber bolts and alignment today. Plus he practically built The Green Bean himself. keeptheuroalive 05-14-2007, 03:26 PM Geordie I got taillights and need clears. Come to Jeffrey's after you get off work, I'll be there. Probably can find the rest of my ambers. redefinedM3 05-14-2007, 03:32 PM How much ya want? 20 sound good? 2ruble 05-14-2007, 03:38 PM Either way's cool, but my tech aligns prolly three-four e36s/week and a coupla e30s/month from the Bf.c GA crowd. Just did Robstah's tie rods, camber bolts and alignment today. Plus he practically built The Green Bean himself. Alright, well I really need to get some suspension on it too... but yeah, I'll try to come through on Thursday at the latest. And I'll have the 150 and all the ambers for you. Thanks man... BimmerDawg 05-14-2007, 04:10 PM Geordie I got taillights and need clears. Come to Jeffrey's after you get off work, I'll be there. Probably can find the rest of my ambers. Kewl, thanks. Lemme see what Ruble wants to do and I'll take them off your hands if he ends up not getting the clears. 20 sound good? See above. :) Alright, well I really need to get some suspension on it too... but yeah, I'll try to come through on Thursday at the latest. And I'll have the 150 and all the ambers for you. Thanks man... That'll work. I'll be here all week. M3Alpine99 05-14-2007, 07:43 PM "<96" means before or less than, so a marginally intelligent person would deduce it to mean pre-96. As Rachael would say; I'm not saying, I'm just saying. Wow, If this is the education our kids are getting these days we're doomed. Do I hear a pwned? Nifty, sounds good, I'll try to make something happen... have to go act like I'm working now... at least for a little bit... Cool you are coming to cookout? I've got a stock 93 318is, all the corners and everything are there.... When did you get this? I was too late as I have all of that except for the nasty pre-96 sides :) quattro santos 05-15-2007, 12:59 AM PM sent. 2ruble 05-15-2007, 11:00 AM I got it on Thursday, doesn't really run, and there's some damage... but until everything gets straight with the e30, I need another car... Matt 05-15-2007, 01:00 PM Figuring out what part fits what is harder in german... I'm still trying to teach the techs that von means from and bis means to... |