|
View Full Version : JT-D Tranny Brace w/ bushings BealeAss 05-13-2007, 04:52 PM Selling off my JT-D Tranny Brace, comes with all hardware the brace comes with from JT-D as well as a brand new set of bushings. $200 shipped. http://media.livedigital.com/pictures/f6/c4/f6c47b3124737089534ed189206ab645.jpg Manny 1 05-13-2007, 05:37 PM Will this fit my 95 325i sedan and will my uuc tranny mounts work BealeAss 05-13-2007, 05:45 PM Will this fit my 95 325i sedan and will my uuc tranny mounts work There would be no need for your UUC bushings. You could sell those off. I am 90% certain it only fits M3's. empty 05-13-2007, 07:08 PM Actually, it should fit all E36s. I have one for sale with both sets of bushings as well. Mike GottaLoveAvus 05-13-2007, 09:51 PM does this cause vibartions? ///M3 CRAZY 05-13-2007, 10:34 PM is it just dirty or what is going on with the right side? i would also like to know about the vibration. redefinedM3 05-13-2007, 11:13 PM is it just dirty or what is going on with the right side? i would also like to know about the vibration. Thats what I was thinking, except to me it looks like it has been welded :shifty BealeAss 05-14-2007, 08:06 AM Actually, it should fit all E36s. I have one for sale with both sets of bushings as well. Mike wtf thread jack. does this cause vibartions? is it just dirty or what is going on with the right side? i would also like to know about the vibration. Thats what I was thinking, except to me it looks like it has been welded :shifty The vibration is dependent upon the type of bushing installed. The black ones tend to be more race oriented, a set of blue is sold by JT-D as well for about $25-30 which are a little more streetable. As for the right side, the 2 tabs on the ends were re-welded, but it doesn't affect the use of the brace whatsoever since no bolts go there. m3jasper 05-14-2007, 09:03 AM I'll give u 5 bucks. ;) Bump for a good seller! Erik L 05-14-2007, 05:10 PM Why did you decide to remove? Too much for street use with the black? Thanks, interested and curious, I wish I could try it before I buy :-) BealeAss 05-14-2007, 11:05 PM Why did you decide to remove? Too much for street use with the black? Thanks, interested and curious, I wish I could try it before I buy :-) I don't know, I never actually used the black bushings. So I cannot comment on that. I simply removed b/c I didn't want it anymore and it was something I could sell for some spare cash. BealeAss 05-15-2007, 10:00 AM BUMP! I wanna move this thing. BealeAss 05-18-2007, 06:42 PM Bump BealeAss 05-21-2007, 01:36 PM Price drop-$175! M3Alpine99 05-22-2007, 11:58 PM Do you have the blue bushings for use with this item? BealeAss 05-23-2007, 06:51 AM Do you have the blue bushings for use with this item? There's a set of blue in there, but one is shredded. A new set from JT-D is only like $30ish. M3Alpine99 05-23-2007, 11:37 AM Aren't these 280 new? Seems kind of high if I need to buy a set of mounts AND it has been welded for some reason... I am really interested but trying to understand. BealeAss 05-23-2007, 11:40 AM Aren't these 280 new? Seems kind of high if I need to buy a set of mounts AND it has been welded for some reason... I am really interested but trying to understand. $299 retail + the $30 extra for the street bushings. I will work out a price for you. The weld I can assure you doesn't impact how the brace performs I ran it w/o any problems whatsoever. I'll shoot you a PM. MRMARSH 05-25-2007, 06:46 PM pm sent BealeAss 05-25-2007, 06:50 PM pm sent pm replied. MRMARSH 05-25-2007, 07:38 PM payment sent BealeAss 05-25-2007, 08:43 PM Sold! To the man in blue. :redspot |