|
View Full Version : S52 Cams and lifters (Mint condition) Mr. M3 05-11-2007, 11:52 PM Cams sold, but a perfect set of lifters are still available. Asking $150 shipped but feel free to make me an offer. http://img215.imageshack.us/img215/7560/img0290jy4.jpg http://img215.imageshack.us/img215/2420/img0291nv0.jpg http://img215.imageshack.us/img215/1392/img0292gp6.jpg mars3554 05-12-2007, 09:54 PM Why do they look bent? :confused http://img216.imageshack.us/img216/1045/img0282ko3.jpg http://img215.imageshack.us/img215/8540/img0284mm7.jpg Mr. M3 05-12-2007, 11:04 PM Just the camera lense being so close to the cams. It exaggerated the curve of the lense. I took close up pics to show that there is no scorring on the cams. Look at the first pic in my post to get a broader overview of the cams. Thay are definatly not bent, cams don't bend, they break rather than bend since they are hollow. mars3554 05-12-2007, 11:46 PM possibly interested then. Tell me, on a nonvanos block, whats the difference between the s52 lifters and the m50 lifters? I got a motor sitting around to toy around with. Mr. M3 05-13-2007, 01:36 AM Well the lifters are the same for the 323, 328 and all e36 m3's. So if you put M3 cams into a 323, these lifters would work perfectly with the cams! However, on a non-vanos block such as an older 325 m50, the lifters are different to accomodate different less agressive cams and different valve/valve springs. If you were to build up an m50 nonvanos motor with m3 cams, I would definatly upgrade your valve springs and lifters with oem m3 lifters and springs, so there would be a lower chance in your valves floating. If you have any more questions, please don't hesitate to ask. If you are also interested in purchasing these, PM me. Thanks dinodad 05-13-2007, 10:56 PM Well the lifters are the same for the 323, 328 and all e36 m3's. So if you put M3 cams into a 323, these lifters would work perfectly with the cams! However, on a non-vanos block such as an older 325 m50, the lifters are different to accomodate different less agressive cams and different valve/valve springs. If you were to build up an m50 nonvanos motor with m3 cams, I would definatly upgrade your valve springs and lifters with oem m3 lifters and springs, so there would be a lower chance in your valves floating. If you have any more questions, please don't hesitate to ask. If you are also interested in purchasing these, PM me. Thanks Can they be put into my 95 325is? How much would you ship them to 99501? Thanks, Mr. M3 05-14-2007, 01:45 AM Sent you an email. Are you interested in the whole thing or just the cams? whitejd 05-14-2007, 04:11 PM I am interested in just the cams. pm me if they are still available. Mr. M3 05-14-2007, 08:01 PM Yes they are still available, the price is still set at #350 plus shipping. Where are you located? ~Matt Mr. M3 05-16-2007, 07:19 PM Cams are sold! Lifters still available... remember to replace your worn lifters before you install cams :)! Mr. M3 05-20-2007, 07:33 PM bump s52e368 05-22-2007, 03:43 PM offer still stands. Mr. M3 05-22-2007, 08:04 PM offer still stands. Cams are sold already, but the lifters are still available. Make me an offer. Mr. M3 06-02-2007, 09:33 AM Lifters still available $180 shipped! They are a must when upgrading cams on an older high milage engine! Mr. M3 06-29-2007, 05:24 PM bump, obo. Mr. M3 07-04-2007, 08:40 PM lifters still available, any reasonable offer will be accepted! Mr. M3 08-06-2007, 04:48 PM Cams sold, but a perfect set of lifters are still available. Asking $150 shipped but feel free to make me an offer JPStrniste 08-06-2007, 05:16 PM pm sent Mr. M3 08-07-2007, 10:23 AM lifters Sold to JPStrniste! |