PENDING for 3600 shipped.. if sell falls and you would like to be notified PM me .

I have a clean S52 motor with 68k miles that I bought from a shop and installed on my car only to run 3k before someone rear ended me!

the motor runs absolutelly fabulous and is very very strong a few members on the boards can testify to this..

it runs perfect, no vanos noice, no problems, oil pump nut fixed already, etc

I will include the full longblock for PRICE $$$$
if you want the tranny as well Ill do everything for $
that will include sensors, alternator, manifold, injectors, oil pan, water pump, thermostat, blah blah blah..

I do have the rest of the car if you need any other parts from a M3..

I am in SOCAL but I can also SHIP because I have a few hook up places that will do it for good prices..

help me give this engine a new home in the bay of a bimmer where it can run and play with the others lol..

Are you selling it as an obd1 with harness.

im driving a 2001 325i, thats not a hard swap...is it?

yea does this come with obd1 setup?

I'm interested in the m3 mouldings for the doors...was this a coupe?

Are you interested in selling the transmission?

Thanks

Greatdeals.

OK lets clarify NO im not selling as a OBD1 kit.. I do have everything for a OBD1 but it will come just like a obd2 kit.. if youd like the harness etc of the obd1 I can sell em also. the price is already cheap enough as is..
I also have a m50 mani etc etc for sale look at my other thread in whole parts cars.

yes I do have the M3 moldings for the doors PM me with a reasonable offer but their is another guy also interested..

car is a COUPE

Answer the transmission question?

Are you willing to sell the transmission and ancillaries? What's the mileage on the tranny? I'm looking to swap my '95 e36 auto for a M3 ZF 5 speed.

wait, you're parting your car out? that's too bad, i really wanted to get a few runs in with your car. another e36 M3 bites the dust :(

wait, you're parting your car out? that's too bad, i really wanted to get a few runs in with your car. another e36 M3 bites the dust :(

tell me about it bro, as clean M3 as they come all ruined for some stupid girl who crashed her stang in my rear!


Yes I might sell the transmission separate.. make an offer!

Are you willing to sell the transmission and ancillaries? What's the mileage on the tranny? I'm looking to swap my '95 e36 auto for a M3 ZF 5 speed.


yes I can give you EVERYTHING you will need to do the swap from flywheel, tranny, clutch, pedals, etc you name it . make an offer for the full swap?

For the entire transmission swap with ancillaries, how about $700.00. trans, pedals, clutch, drive shaft, clutch master cylinder, hydraulic lines, and I can't think what else at the moment as it's Friday and I've had a few beers. Would love to buy the whole package but can't afford right now. Might be willing to purchase entire package if you'll take a few payments. I'll purchase the trans package now and make a couple payments for the motor over a few months. What are your thoughts?

email me: larryglover@gulfviewllc.com

BTW - really sorry some dumb bitch hit you from behind. A BMW M3 of any vintage is a terrible thing to waste. Hope her insurance company compencated you accordingly to replace. Are you planning to stay with another BMW?

Cheers,

LG

Sorry dude for more questions, I'm assuming it's a ZF S5D 310Z 5 speed for the M3, is this correct?

Cheers,

LG

Bro,

PM me.

For the entire transmission swap with ancillaries, how about $700.00. trans, pedals, clutch, drive shaft, clutch master cylinder, hydraulic lines, and I can't think what else at the moment as it's Friday and I've had a few beers. Would love to buy the whole package but can't afford right now. Might be willing to purchase entire package if you'll take a few payments. I'll purchase the trans package now and make a couple payments for the motor over a few months. What are your thoughts?

email me: larryglover@gulfviewllc.com

no thanks another member is selling all that for 1100 I believe and thats cheap already I wont go 500 under.. I could do 950 though..

Sorry dude for more questions, I'm assuming it's a ZF S5D 310Z 5 speed for the M3, is this correct?

Cheers,

LG
correct

Bro,

PM me.

Pmed back



At this moment I dont know what I will be doing for sure but I do have another M3 that everything could be swapped into but obviously im not.. soo right now its either S2k w/ 2jz a lil later, but im really aiming for a mk4 Supra TT 6spd:buttrock

trade?

http://img.photobucket.com/albums/v296/GRizzly600/DSCN1608.jpg

I'm in need of the engine only but since I'm in WA would need it shipped. Still available?

yes I can ship Pm me and leave a phone.. thanks

trade?

http://img.photobucket.com/albums/v296/GRizzly600/DSCN1608.jpg


I would if the circumstances were diff bro, thats a awesome bike, but im looking to buy a mk4 supra turbo 6pd and all are over 30k and they are most cash so I need all the cash I can get.. GL though

For whatever reason, PM is not available to me.
Thanks.
hobie

supra ftw!!! hey if u still have the "tranny" swap later on for a bit cheaper lemme kno

alot of interest!

i have 92 325i automatic...and i wna do the swap..how much for the whole package?

the full package for auto-manual is 950 and that includes all lines, master cylinder, tranny, clutch, flywheel, etc

Is the mileage on the tranny the same as the motor @ 68k?

are you willing to sell just the obd-I conversion? still available?

Is the mileage on the tranny the same as the motor @ 68k?

NO the tranny has 90k. runs perfect.. if you local you can come and go for a ride as well..

are you willing to sell just the obd-I conversion? still available?

by obd1 conversion what do you mean? which parts.. but yes I am willing to sell.

by $950 for the tranny swap parts would that be shipped?

by $950 for the tranny swap parts would that be shipped?

no that would NOT but I can possibly work with you on the shipping..PM me if interested

wiring harness and dme obd I. Is the driveshaft available?

Spitvenom, I tried to AIM you but have not received a response. I'm interested in the tranny swap package, email me @ larryglover@gulfviewllc.com.

I need your zip code so I can check on shipping costs here to Tampa.

LG

wiring harness and dme obd I. Is the driveshaft available?

I want 350 for 506 DME and the OBD1 MINT harness..

Spitvenom, I tried to AIM you but have not received a response. I'm interested in the tranny swap package, email me @ larryglover@gulfviewllc.com.

I need your zip code so I can check on shipping costs here to Tampa.

LG

ok ill email you right now.. thanks

I'll take em. where are you located in socal.

Im near ontario.. rancho cucamonga..

what times are you available to meet for pick up. call so we can figure out a time #951-522-9990 Andy

ill give you a call later today because car is still at the shop.. y

did the head have to be tapped for the temp dual temp sensor.

no sir it did not.. I converted the wires with 2 plugs.. can convert back no prob

PM sent.

still for sale?

well im still waiting for buyer but if someone comes with same offer before ill take it and hes cool with that too.

If sale falls through my offer still stands...

Bike is worth $4400 with all parts.

lol sorry bro im keeping this motor and turboing!

Do you still have the manual swap stuff ? Does the $950 include the driveshaft ?

Do you still have the manual swap stuff ? Does the $950 include the driveshaft ?


yes sir the driveshaft is in there

still for sale? i need an engine for my 99 and this is a good deal...

long gone thanks