I am swapping a 5 series M50B25 into a 1994 3 series.

I pulled the oil pan off of each motor and I have to put the bracket that is out of the 3 series into the 5 series. It is the bracket that the oil pick up mounts to.

I believe the part it mounts to is the main bearing cap. I looked all through the bentley and couldn't find the specs.

HELP!!!!!

http://www.realoem.com/bmw/diagrams/b/w/24.png

I need the specs for the bolts that attach number 14 to the engine.

Thanks!

Those are the main bolts. They are torque to yield, so you will need new ones. lightly oil the fasteners before installing. The spec is torque to 20Nm, then tighten an additional 50 degrees.