View Full Version : MLS .140" Headgasket for m50/s50/s52


caldweb
03-19-2007, 02:26 PM
This is a used .140" Cometic/VAC MLS headgasket that was installed with ARP head studs on an s50 engine for about 4k miles. It did not leak or have any problems. It was only removed because a smaller gasket would be better suited for the engine since it already had low c/r pistons. These gaskets can be reused, unlike the stock gasket. $125 shipped within the US. SOLD

VAC sells this gasket for $229 new: http://www.vacmotorsports.com/cgi-bin/view_item.pl?item_id=562

http://home.comcast.net/~blake.caldwell/IMG_2648.JPG

Turbo ///M50
03-19-2007, 02:38 PM
will this work on a non vanos head

caldweb
03-19-2007, 03:15 PM
will this work on a non vanos head

Well the part numbers for the stock headgaskets are the same between vanos and non-vanos m50's, so this gakset will work with both.

Don Nguyen
03-19-2007, 03:44 PM
PM sent.

Turbo ///M50
03-19-2007, 04:27 PM
Well im interested?

Well the part numbers for the stock headgaskets are the same between vanos and non-vanos m50's, so this gakset will work with both.

caldweb
03-28-2007, 02:48 AM
Sold. Thanks for the interest.