Like the title says, I have some stuff for sale. I am selling this stuff because I have built a Spec E30 race car and this stuff is no longer needed and/or illegal in the race series. Prices on the performance stuff is firm, all others are OBO. PLEASE SUPPORT BEER TECH RACING!!!!!!!

The car this stuff came off of is an 87 325is, which currently has 114K miles. All performance goodies have roughly 4000 miles on them. Everything works as it should with no damage. I have not cleaned any of this stuff as it has just come off of the car so please excuse the dirty pics. Below is a quick list with prices that I will keep updated. See below the list for pics and better descriptions. I have pics for other stuff listed, please email me. (see bottom of page for contact info.)

Performance:

Fully Custom GC coilover suspension $1200.00 Plus Shipping
Eibach 20mmF/16mmR sways w/ Turner rear mounts $320.00 Plus Shipping
Ireland Engineering SS Cat Back exhaust $ 325.00 Plus Shipping
Rear Subframe w/ IE toe and camber kits and TA bushings $240.00 Plus shipping

Miscellaneous

BMP Keyless entry system with two fobs. $50.00 Shipped
Pioneer 5 ¼ 130w speakers for kick panels $40.00 Shipped
Blaupunkt Montreal CD34 Headunit $50.00 Shipped
Black Center Console (part with shifter hole) $15.00 Shipped
Black Center Console (part where e brake goes) $15.00 Shipped
Black Kick Panel Speaker covers $10.00 Shipped
Antenna $30.00 Shipped
Black Door Pulls $20.00 Shipped
Black Map Pockets $10.00 Shipped
Black Suede Ebrake Handle, Shift Boot, Ebrake cover $30.00 Shipped
Hood Latch Pull $5.00 Shipped
Sunroof Motor $30.00 Shipped
Rearview Mirror (non map pockets) $15.00 Shipped
Black Visors $20.00 Shipped
Gas Cap with lock (includes key) $20.00 Shipped







Ground Control Custom Coilovers: $1200 plus shipping.

This is by FAR the BEST setup for an E30 I have ever felt. I HATE to have to sell it, but I want to race!
Ground Control coilover kit includes shortened, reinforced, powder coated housings done at Ground Control. Ground control camber plates, new wheel hubs and wheel bearings, custom valved Koni SA shocks to match springs, GC adjustable front endlinks that connect the sways directly to the strut housings instead of the control arms. 500lb front and 650lb rear springs, adjustable rear spring perches. (Sways not included.)
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0644.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0650.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0652.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0646.jpg

Eibach Adjustable Sway Bars 20mm Front 16mm Rear with Turner reinforcing rear mounts. $320 plus shipping

****Sways are a perfect match for these springs/shocks. I highly recommend this setup!
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0647.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0648.jpg

Ireland Engineering Stainless Steel Cat Back Exhaust $325.00 plus shipping
Perfect condition except for a small scrape on the bottom(see pic #3) you cant see it when its on the car. The last pic is what it looked like on my car. This shines up very nicely with a little effort, sorry for the dirty pics.
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0664.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0665.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0666.jpg (scratch^)
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0667.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0668.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/380_rear3quarter.jpg

E30 Rear subframe slotted, reinforced, IE Camber & Toe kits $240.00 plus shipping
This is a stock E30 rear subframe that has been professionally slotted and reinforced. Both kits from Ireland have been welded on, Camber Kit and Toe Kit. Please go to E30 /Suspension & Steering to read about it. IE Link
Buying this saves you from having to remove your subframe, grind it, cut it, weld it, reinforce it, etc. This also includes the IE Trailing arm busings as well. (see pics) First pic is the IE kit from their website.
http://i122.photobucket.com/albums/o270/Beertechracing/E30RearCamberToeKit.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0654.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0662.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0659.jpg
http://i122.photobucket.com/albums/o270/Beertechracing/IMG_0658.jpg
Thanks for looking. Please support Beer Tech racing!
Please contact me for more information at Beertech at gmail (dot) com <<<paypal accepted at different email address, please PM or email to get the address.
Thanks,
Brian Jones
Beert Tech Racing #380

sent you a pm

I like that cat back, PMing you now.

PM's answered.

I would like to get the two center console parts, the keyless entry (possibly), the speakers, the antenna, and a glove box latch if youve got it.

Hi can you send me pics of the shift boot, brake etc. Any video clips of the exhaust, I'm curious of how it sounds, I bought an ANSA and not happy with it.

e30master@gmail.com

Thank you

check pm

Hi I did not get a pm, can you email me e30master@gmail.com, thanks

still got the cat back if so let me know

Email sent re: cat back and subframe.

hey there, really interested int he suspension setup...e-mailed you and lookin for a reply...let me know if you still have it...

Please PM me regarding whether or not both sways will fir the e30 M3. I believe the rear will work but I'm not sure about the front. Il call I.E or turner tomorrow.

If they do fit Ill drive up and pick up the parts this weekend.

i'm still waiting to hear about the gc kit and possibly the rear subframe as well...let me know asap...Nick