Up for sale is used e36 M3 front brake calipers w/lines, euro floater rotors, stock pads AND Porterfield track pads along with Bimmerworld solid bushing kit. Sorry for the crappy pics, had to use a cell phone as the Nikon D70 is with my wife in FL. Anyway, here are the pics (click any pic to enlarge):

Here is a general pic of everything you get. The track pads are in the box, the stock pads are the ones arrayed.
http://www.we-todd-did-racing.com/thumbs/small/988418_j63hj/139875279_457132187_0.jpeg (http://www.we-todd-did-racing.com/view/full/988418_j63hj)

Here is the remaining pad on the stock pads. Plenty of life left.
http://www.we-todd-did-racing.com/thumbs/small/988414_v9m7s/139875031_457131298_0.jpeg (http://www.we-todd-did-racing.com/view/full/988414_v9m7s)

Here are the euro floaters. They have only a few thousand miles on them, basically full life left. No cracks, rust, warping, pad deposits, etc.
http://www.we-todd-did-racing.com/thumbs/small/988416_qmegp/139875064_457131410_0.jpeg (http://www.we-todd-did-racing.com/view/full/988416_qmegp)

Another closeup to show they have virtually zero wear
http://www.we-todd-did-racing.com/thumbs/small/988421_liyji/139876059_457134912_0.jpeg (http://www.we-todd-did-racing.com/view/full/988421_liyji)

Close up of the calipers. Previous owner painted them red with unknown brand of paint. You can see the solid bushings well.
http://www.we-todd-did-racing.com/thumbs/small/988417_bojgm/139875095_457131513_0.jpeg (http://www.we-todd-did-racing.com/view/full/988417_bojgm)

Porterfield R4 track pads
http://www.we-todd-did-racing.com/thumbs/small/988415_eicsl/139875048_457131355_0.jpeg (http://www.we-todd-did-racing.com/view/full/988415_eicsl)

Closeup of track pads. Tons of life left. No chunks missing, excessive cracking, etc.
http://www.we-todd-did-racing.com/thumbs/small/988420_p05v1/139875342_457132396_0.jpeg (http://www.we-todd-did-racing.com/view/full/988420_p05v1)

Anyway, for anyone wondering why I'm selling this, here is why:
http://www.we-todd-did-racing.com/thumbs/small/988419_ih3s3/139875326_457132342_0.jpeg (http://www.we-todd-did-racing.com/view/full/988419_ih3s3)
:redspot :alright

Anyway, I'm looking for $400 OBO for the whole kit. The track pads, rotors, and bushing kit alone were bought brand new last year for $500. As already stated, everything is in great condition ready to go onto a non-M 3 series as a budget BBK, or onto an M3 that for whatever reason needs new calipers. I am willing to split the sale up, but ONLY if everything is sold at the time of the initial sale.

Please PM or email chad.schobert@gmail.com if interested or have any questions. Thanks!

how much for the R4's if youre willing to split.

I'll do $100 shipped for the rotors.

Jay

how much for the R4's if youre willing to split.

One update that you kind of beat me to, I found a set of rear R4's of the same wear I had in a back closet, so I now have a full set of front and rear R4's. The pads front pads were $170 new, would $90 shipped for the fronts be acceptable? The rears would probably be $60 shipped.

I'll do $100 shipped for the rotors.

Jay

Hm. Would you do $130 shipped? I paid $260 for these just last year and they have had limited use. Oh, and now all we need is someone to step up that has interest in the calipers/stock pads and then we could work out a split sale . . .

To install everything on a non-m3, is there anything else that I would need?

I'm interested in the whole kit.

So $150 shipped for both? These are r4's not R4-S's right?

if you can shoot me a pic of the rear's I'll take them.

I'll do $130 shipped for the rotors...

Check your PM.

So $150 shipped for both? These are r4's not R4-S's right?

if you can shoot me a pic of the rear's I'll take them.

They are R4, not R4-s. Track only pads. If the first sale falls through I'll get you those pics and we can go from there.

camiloteram-

I'm not sure. It's possible you might need to upgrade the spindles, I truly don't know. It may just bolt on. Also make sure you have 17 inch wheels. I've been told that these tend not to fit under most 16's.

//M3//M5-

If the previous deal falls through we can go from there.

I also responded to all PM's so everyone should have a response.

first sale? thought I was first? Anyway, i'll take them if you're selling them.

first sale? thought I was first? Anyway, i'll take them if you're selling them.

well, I received an email last night offering to buy the whole kit together. He didn't post in this thread. But yeah, he was first. However, he hasn't sent payment or anything, so it is far from a done deal. We'll see in the next day or two and go from there.

well, I received an email last night offering to buy the whole kit together. He didn't post in this thread. But yeah, he was first. However, he hasn't sent payment or anything, so it is far from a done deal. We'll see in the next day or two and go from there.

Hehehe, no worries, my sarcasm failed to come through.

Just let me know when if they become available.

well, I received an email last night offering to buy the whole kit together. He didn't post in this thread. But yeah, he was first. However, he hasn't sent payment or anything, so it is far from a done deal. We'll see in the next day or two and go from there.

Per the email, you can consider the entire setup sold (I sent a followup email this morning to confirm payment details).

Thanks!

Per the email, you can consider the entire setup sold (I sent a followup email this morning to confirm payment details).

Thanks!

Yeah, I got your email, sent payment details. Thanks!

How much for just the calipers and lines? Also, do you have the brackets?

I thought you can only bolt up M3 calipers if you have the spindels?

ill get in line for the rotors.....pm me when you want payment.

interested in the euro rotors.