Up for sale. 99 M3 S52 OBD 1 That is in my 89 325is. Everything is complete. Engine has 88k on it and has traveled 5500 miles after the install. It was cleaned painted and tested with all new gaskets before the Install. It needs nothing but a engine bay to drop into. It also comes with a JB Aluminum flywheel. and 24 LB. Injectors. This engine hauls ass in the car and is a blast to drive. It is still in the car so the buyer can hear it run if they like. Asking 5100.00

shipping will run around 150-300 depending were you are.
thanks

Please email to bennetts22@aol.com

I also have a 98 S52 longblock with 94k for 2200.00

on the longblock thats from the valve cover to the pan but i have several obd 1 and 2 intakes and a oil filter housing i could include off a different engine
thanks

what is wrong with the long block?

nothing is wrong it has been tested and cleaned up and painted.

sorry, also it was the start of another obd 1 conv.

Were are you in Wisco? im very interested

I am interested in the long block. Do you have any pics of it (easier to tell exactly what it comes with).

Were are you in Wisco? im very interested

iam in appleton 1 hour from you. long block comes from the valve cover to the pan and i have i 0bd 1 and 2 intake and a oil filter housing that i can include.

Tested How?

Tested How?

I pulled the pan and valve cover to inspect for any problems, and did a leakdown and compression on the engine.

long block is sold. thanks stan! price lowered to 4650 shipped on the obd1 s52 to the lower 48 states

How much for the transmission? How many miles on that?

How difficult would it be to swap into a tired m50 325i? What would be required?

Nacogdoches...

I enjoy going back there from time to time (got family, went to HS and SFA). It's the one thing I miss, being able to mod your car and not having to deal with whether or not it'll smog or if the parts have a CARB number. Must be nice.

OTOH, here in Cambria CA, nice weather year round and no bugs...

Do you still have to think of the song to spell it?

Awsome Price...wh?y Not Sell The Whole Car And If So How Much ?

How difficult would it be to swap into a tired m50 325i? What would be required?

It bolts right in and i think the obd 1 plug is the same for the wiring.

I wont sell the car because the e30 is my all time favorite and they are becoming harder every year to come across

I have another m3 trans with 65k for 450.00

pics?
what oil pan,sump and dip stick does it have im guesing e34 if it came out of you 89. Im quessing it comes without a harness/ecu?
Why did you remove it from the e30 going into an e30 M3?




HUnter

still have this engine/trans?

has the cooling system been worked on recently?

has the cooling system been worked on recently?


Engine has a new thermo and water pump

flywheel is sold. asking 4400 shipped opn the complete engine and trans
and i will include a stock 32k flywheel

Heres the link to some pictures
http://homepage.mac.com/bennetts22/PhotoAlbum8.html

thanks! check your PM.

Have a modded 320i booster?

Have a modded 320i booster?

No i dont, but i can get one for 125.00 modded

Thanks, but i think Ill take my chances and do it myself.

How about e36 aluminum motor mount arms?

Thanks, but i think Ill take my chances and do it myself.

How about e36 aluminum motor mount arms?

sure i have a couple sets. figure 40.00 a set shipped

S52 sold!
thanks man!!!

i'll follow up with you in a day or so for the rest of the loot.
also.... diff, ECU, 5 lug action, and whatever other goodies you think i might be interested in.