View Full Version : F/S Active Supercharger - OBD II


TIATO
01-30-2007, 12:49 PM
I took my '98 M3/4 back to N/A due to the fact I track my car. The unit was installed by the previous owner at around 67k miles. I took it off at 87k miles. When removed, the unit had been installed for 3 years.

The only thing needed for a basic instal is a software reflash by AA and perhaps some misc hardware (bolts, hose clamps) and air filter The programming was tweaked a bit for my car and when I pulled the unit, I had AA reflash to stock BMW software. My cars original DME which should have a socketed chip is included. I have enough traction fluid for a full re-install, although the fluid reservoir has oil that is less than 3000 miles old in it.

During my tenure, and shortly before pulling the whole kit, I replaced the serpentine belt, all supercharger idler pulleys and oil return line. I replaced the stock Bosch diverter valve with a Hyperboost HX. Those parts have less than 3000 miles on them.

The kit is in good condition but I will let the images below speak for themselves. The kit generated its advertised levels of boost while installed in my car.

Will also include a dual gauge a pilar mount with Autometer Z series boost and AFR gauges. The Boost gauge will need a new vacum line. The AFR will not come with a sensor.

The AA install CD is included, but I have no documentation for a gauge install.

Price is a firm SOLD

While installed in my M3
http://www.altechcorp.com/Mario/sc-4.jpg

http://www.altechcorp.com/Mario/sc-5.jpg

Kit Parts

http://www.altechcorp.com/Mario/sc2.jpg

http://www.altechcorp.com/Mario/sc3.jpg

http://www.altechcorp.com/Mario/oilcooler1.jpg

http://www.altechcorp.com/Mario/oilcooler2.jpg

http://www.altechcorp.com/Mario/oilcooler3.jpg

http://www.altechcorp.com/Mario/oilcooler4.jpg

http://www.altechcorp.com/Mario/intercooler.jpg

http://www.altechcorp.com/Mario/intercooler2.jpg

http://www.altechcorp.com/Mario/housing.jpg

http://www.altechcorp.com/Mario/housing2.jpg

http://www.altechcorp.com/Mario/bracketandparts.jpg

http://www.altechcorp.com/Mario/bracket2.jpg

http://www.altechcorp.com/Mario/bracket3.jpg

http://www.altechcorp.com/Mario/brackets.jpg

http://www.altechcorp.com/Mario/pipes1.jpg

http://www.altechcorp.com/Mario/pipes2.jpg

http://www.altechcorp.com/Mario/pipes3.jpg

http://www.altechcorp.com/Mario/pipes4.jpg

http://www.altechcorp.com/Mario/pipes5.jpg

http://www.altechcorp.com/Mario/pipes6.jpg

http://www.altechcorp.com/Mario/pipes7.jpg

http://www.altechcorp.com/Mario/parts.jpg

http://www.altechcorp.com/Mario/parts2.jpg

FLORIDADUDE727
01-30-2007, 01:40 PM
Man why did you have the software reflashed!!!! Thats a waste we could have swaped ecus. Now it will cost 800.00 bucks for the dam software!!!!

TIATO
01-30-2007, 02:39 PM
Man why did you have the software reflashed!!!! Thats a waste we could have swaped ecus. Now it will cost 800.00 bucks for the dam software!!!!

My software was unique to my cars operating behavior. It was NOT stock AA supercharger software.

e30m3s52
01-30-2007, 03:42 PM
I am very interested would you sell the kit without the software and gauges. I wouldn't need them I have an 88' m3 with an s52.

TIATO
01-30-2007, 03:49 PM
I am very interested would you sell the kit without the software and gauges. I wouldn't need them I have an 88' m3 with an s52.


I would consider doing that. Check your PM

e30m3s52
01-30-2007, 04:39 PM
It was worth a shot.

TIATO
01-31-2007, 12:36 AM
Lowered the price.

Firm $1850 + shipping

e36jaypark
01-31-2007, 08:10 AM
pm sent.

TIATO
01-31-2007, 10:01 AM
Sale Pending.

MRMARSH
01-31-2007, 08:42 PM
if u would part out the gauge pod and maybe the hyperboost send me a pm =D

TIATO
02-03-2007, 09:17 PM
Thanks for the interest folks, but this kit is sold.