View Full Version : Parting a 92 318is 74k original miles


BLOODBOUGHT
01-29-2007, 03:04 PM
Alright everyone it's time to get this out of the driveway. Here's the deal....the car was hit on the passenger side rear quarter and door. Details as follows:

LanguanaSec Metallic
Parchment interior
Frame is straight....I was in Chicago when it was hit and I drove it back to Pennsylvania...the only thing mechanically wrong was rear passenger tire was slightly tweaked causing the tread to wear off during that 500 miles...however I still managed to get her up to 100mph a few times....yeah yeah not safe but that's me.

Here is what I took out to put in the replacement shell
No longer has....
Engine
Tranny
Seats, door panels
Exhaust
Lights and Markers

I have most everything else...so tell me what you need and help me located it and it's yours...cheap. I have time THIS WEEK to do some wrenching so make it snappy.
If there is anyone who needs several replacement E36 body panels I'll cut you a good deal on the entire car.

Things you should know:
Pretty shitty paint on the hood and trunk....
Front quarters, trunk, hood, and rear drivers quarter are all free of significant dents or dings
3.45 open diff.
stock suspension
All glass is intact and fine
Air bag not deployed
Window and Sunroof motors were in good working order

I'm sure there are all kinds of things I should have said that I missed but start talkin and we'll get this sorted and get you guys any parts you need. I've been on BF.c for a while so I know how these business transactions go....I won't EVER intentionally rip anyone off...but be sure to be clear what you need and I'll be very clear on the condition I find it in. I have paypal if anyone desires to pay that way...or money orders are ok as well.

Email...PM's fill up too quick. jdillonstephens at gmail dot com
RANDOM PICS OF PARTS...PICS UPON REQUEST...LET ME KNOW WHAT YOU NEED AND I'LL TRY TO CLEARLY SHOW THE QUALITY.

STR8OUT
01-29-2007, 04:37 PM
I need: Center Console / E-brake boot, drivers side grey sideskirt, power sunroof, and headliner (if its a 4 door)

thundercat
01-29-2007, 04:45 PM
do u have the heater seat switches

BLOODBOUGHT
01-29-2007, 06:18 PM
str8out emailed you

thundercat...sorry seats were nonheated so no switches

BLOODBOUGHT
01-31-2007, 03:04 PM
no one needs any E36 body panels......

thechadula
02-01-2007, 12:00 AM
Is the DME gone as well?

Cracker1
02-01-2007, 12:22 AM
I need the panel(s) (and plastic nuts)behind the rt. rear tire and under the car that covers the vent tubes and such. Also, I need the pigtail for the right fog light. i.e. the wires and plug that plug into the fog light. Also, if you have a good set of foglights, I need those as well.

thundercat
02-01-2007, 03:09 AM
a 92 318 had airbags?
i dont even have em

Alpine 318is
02-01-2007, 03:40 AM
a 92 318 had airbags?
i dont even have em

i have um

BLOODBOUGHT
02-06-2007, 10:49 AM
Yes the DME is gone, went into the new shell.

Cracker1 are you talking about the fender liner? I'm unclear what panels so are talking about...I'm not a mechanic so these easiest way to be very clear is to go to realoem.com and show me what part/part# you want...and I'll check on the fog wires pretty sure I have those. But I don't have the fog lights.

Guys I found my camera so let me know if you want picks of something.

Jetblack95
02-06-2007, 12:19 PM
what color interrior? pics? i need the a and c pillers and the sunroof switch cover.

and of the stock suspension. how is the condition? how much for it? i have 150K on mine and i like the ride. wouldn't mind throwing another stock suspension on until i can afford a nice sport set-up.

SterlingSilber3
02-06-2007, 12:33 PM
alternator??? if so, price shipped to Jacksonville FL 32227

BLOODBOUGHT
02-07-2007, 04:43 PM
sorry no alternator

interior was called parchment I believe...I'll post a couple pics to give you an idea of the color....the headliner is rough, I was going to redo it in a sued or something and sell it.

less than 75k miles on the suspension...I don't know, maybe $100 plus shipping for the shocks and struts. If you're interested we can negotiate. I also had new meyle ball joints installed not long before the accident in the front control arms, they're much much better than the stock ball joints. Let me know i fyou are interested in just the shocks and struts or if you would want those as well as the springs and the control arms(wishbones)

ok well my pics are all too big and I need to get back to studying for a test on brain chemisty and finish my arabic homework...so send me an email and I'll get pics to you tonight.

BLOODBOUGHT
02-07-2007, 04:59 PM
jetblack emailed pics, thanks.

10isPro
02-07-2007, 08:47 PM
just emailed about suspension--I am local and can pick up.

dorejades
02-08-2007, 07:37 AM
Hey could you send me Pics of the Driver side Door panel also need the exterior door handle trim and interior door handle and Hood emblem


thanks

Pm me or dorejades@yahoo.com

valkut
02-08-2007, 11:55 AM
hey i need the driver side door lock mechanism thats inside the door and the front bumper moldings.email me at valikatl@yahoo.com with price shipped to 30135

REZBMR
02-08-2007, 12:45 PM
did you have a CAI on it?

BLOODBOUGHT
02-09-2007, 10:28 AM
No CAI and valkut I'm about to email you some pics

Jetblack95
02-09-2007, 10:50 AM
you got a spare AC compressor sitting around for this thing?

Mac8008
02-09-2007, 12:36 PM
how about the nose panel? would it fit a sedan?

BLOODBOUGHT
02-09-2007, 02:06 PM
No sorry no ac compressor.

Yes I do still have the nose panel...shipping is roughly $25 dollars and I'd like to see $50 for it, so I'll say $75obo shipped.

I'm also removing the REAR DIFFERENTIAL which is a 3.45 OPEN (nonLSD) Diff tag reads 3.45 3442

I'm asking $150 obo for the diff prefer local pick up or delivery, but willing to ship if buyer pays full shipping...will arrange meet up or deliver in the Harrisburg, Philadelphia, Baltimore range...don't want to have to arrange meeting up too much further than that.

Many parts still available. All body panels except passenger side door and rear fender available.

CosmossM3
02-10-2007, 12:09 AM
bump for you my friend....

HID_Positive
02-15-2007, 05:29 PM
how much for the driver side fender (assuming this will fit my 325is)

BLOODBOUGHT
02-15-2007, 11:12 PM
$75 and shipping would be another $75....I got a quote for the passenger side shipped to Miami. Yes it will fit...it is the same between any E36. $150 shipped to your door.

makenzie71
02-16-2007, 02:06 AM
manual or power windows? If it had power windows, I need the eurethane bushings out of the passenger window regulator.

96bmwcosmosm3
02-18-2007, 02:04 AM
i need the radiator you got one?

BLOODBOUGHT
02-18-2007, 12:23 PM
I'm fairly certain the radiator for the 318 is smaller than that of the M3...you wouldn't want to use the one I have. Plus it's pretty much seen it's life expectancy...it has 74kmiles on it and it leaks from the base of th expansion tank/resevoir. From my understanding 80k is a ball park life expectancy for these radiators...

so the short answer is no....sorry I don't have one that will work for you.

96bmwcosmosm3
02-18-2007, 06:43 PM
sheet.... i actually needed it for my 318ti its got the same leaky buttom problem though .... oh well

dejaygo
02-20-2007, 02:22 AM
do you still have the rear differential? I'm interested in it.

BLOODBOUGHT
02-20-2007, 09:37 AM
Yes the diff is still available. There's been several people very interested and comitted to paying...but no one has put up money so it's still available.

do you still have the rear differential? I'm interested in it.

BLOODBOUGHT
02-21-2007, 09:30 AM
TTT for random pics and pics upon request...lots of parts left

persian prince
02-21-2007, 02:12 PM
do you have a black center console? i forgot?

chiodeguate
02-21-2007, 07:04 PM
Hey, what are you looking to get for the set of bumper trimming (rear and/or front)? I am also looking for the leather shift boot, some fog lights and window molding. Thanks.

BLOODBOUGHT
02-21-2007, 08:21 PM
you can't receive pm's ....send me an email so I can send you some pictures and figures. jdillonstephens @ gmail dot com


Hey, what are you looking to get for the set of bumper trimming (rear and/or front)? I am also looking for the leather shift boot, some fog lights and window molding. Thanks.

BLOODBOUGHT
02-21-2007, 08:24 PM
Sorry it's tan

do you have a black center console? i forgot?

SterlingSilber3
03-06-2007, 08:30 PM
do you have the obd1 engine wiring harness? if so price shipped to 32227 please. Jacksonville FL

LinxJinx
03-11-2007, 08:41 PM
Hi,

I'm looking for the front passenger side door molding and the molding on the front right fender if you have them

BLOODBOUGHT
03-12-2007, 11:15 PM
Are you looking for parts for your 318i, if you are i'm fairly certain the door molding from an is won't work. Are you talking about the plastic fender liner? If so sorry it's sold.

trippinju
03-13-2007, 12:37 AM
hey this is what I need":
Black floor mats
tool set of OEM Bmw
foglight covers or assembly
brakelight bulb console
windsheild washer bucket
hood release wiring

Please email me at Undertheshade@gmail.com, cuz i don't check here that often. ThNKS!!!

tatawaki
05-08-2007, 06:14 PM
Looking for Fog light Covers, let me know how much you want shipped to Canada, I can do USA too if it will be too much of a hassel.