SOLD................. is my OBDI Dinan Super charger kit. This kit is complete with every nut and bolt to install. I'm including a Vortech V2 blower,bosch bpv,dinan oil catch and Dinan brackets with all hardware to install. All piping including intake piping with a brand new K&N air filter. This will also include 28.8 lb injectors and a chip from RMS for a 325 Dinan 7lb pulley and RMS 10 lb pulley and belts for both so no guess work will be involved. And a 318 fan with spacer so you can keep the mechanical fan and have room for the super charger belt. I also have 2 couplings one for cars with traction control and one for cars without. I have had this kit for 6 months and loved it. I made 244WHP with this in an ODB1 325. With some more mods this can make a lot more power. I have put about 4000 miles on it and was told it had about 5000 miles on it when I purchased it. Ask any and all questions...I have many, many pictures of this on and off the car. I also have Dyno sheets and video of me on the Dyno. I can send any of this at any time. I also have an DME from a 1998 328 Z3 that is reprogrammed from Dinan that I received when I purchased this kit. This kit was orginally purchased for the 98 Z3. So this should fit OBD1, OBD2, 325, 328, M3, and Z3. Anything other than OBD1 325 will need a tune. If its a OBD2 2.8 the Z3 computer might beable to be used if EWS is programmed?http://i143.photobucket.com/albums/r123/intvic18t/ebay761.jpghttp://i143.photobucket.com/albums/r123/intvic18t/ebay475.jpghttp://i143.photobucket.com/albums/r123/intvic18t/ebay754.jpg
Asking price is $3500 shipped This is complete with all hoses,oil lines,fittings,oil drain tube,bolts,nuts,piping,injectors,software,and a brand news k&n air filter.. the maf is not included..If your looking for something complete ready to go this is it for a obd1 325

what version of "v2" is this? S trim by any chance?

what version of "v2" is this? S trim by any chance?
how can i tell, this kit is only about a year old

Any chance you want to help install for a local, if I remember your a ASE tech? Was the setup at all affected by the bad aftercooler and coolant engine flush? Are you going with some other setup or going back to NA? Thanks

Any chance you want to help install for a local, if I remember your a ASE tech? Was the setup at all affected by the bad aftercooler and coolant engine flush? Are you going with some other setup or going back to NA? Thanks
I have a awsome garage with all tools and a lift i would help put on. The kit is is perfect shape the only thing that happened was water came out of the aftercooler and into engine no water or anything traveled backwards into the blower.Rightnow im just tring to get back up off the ground after everything that happened.

This thing is gone..... gdub081 came down today and we did a awesome install everything went great. we had it all done in 8 hrs with not one problem check out the picturehttp://i143.photobucket.com/albums/r123/intvic18t/ebay772.jpg
Man im going to miss this!:(

You guys rock!

intvic18t is an awsome guy and his shop is great. I was really concerned about driving 120 miles back home from the install at 9pm but it ran amazing with not one issue. I feel bad about taking advantage of your misfortune but I can stop smiling. I hope you can keep your bmw and hope to see that turbo on there soon...you know you want to. Let me know if you find a LSD and want to lend your lift again, I think I am going to be needing that very soon. Thanks for the amazing setup with install INCLUDED.

do you still have the aftercooler?

yeah do you? nice install and good deal too.

i sent the aftercooler with all the upgrades back to rms........if i get my money back i will not have the stuff however if i dont get my money back i will have all brand new stuff for sale. i will let you guys know.