1995 BMW S50 M3 Engine for sale
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Stock motor except where noted with <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">66K street</st1:address></st1:Street> miles and a year of track running. Motor is complete, oil pan to valve cover and throttle body. There are no auxiliaries or wiring. Can be installed in any E36 chassis car with no modifications. Items that deviate from stock and come on the motor:
<o:p></o:p>
Baffled oil pan
Wired oil pump nut
24# injectors
Sunbelt race cams
Sunbelt race valve spring kit ( overrev protection )
Competition head gasket
New head bolts
Active Autowerke race header ( single 3" collector )
Eurosport pulley set
<o:p></o:p>
$3250 for all of the above plus shipping
<o:p></o:p>
Equipment available separately only if one were to purchase the motor:
<o:p></o:p>
OBD I engine harness, stripped of street hardware
Custom Jim Conforti chip, EWS delete, 24 lbs. injectors, cams, race trim
Euro HFM
Eurosport intake kit ( shield, adapter and filter )
<o:p></o:p>
$1000 plus shipping in addition to the purchase price of the motor. Note that these secondary items are not street legal and will not work in a street car as a package.
<o:p></o:p>
<o:p></o:p>
Contact Byron Smith
bwsmith (AT) xmission (DOT) com
Paypal or certified check.<o:p></o:p>

this seems like a great deal. Any leak-down or compression checks done?

No need.

The motor runs great and just set an (unoffical) BMW CR lap record at Miller Motorsports Park about two weeks before putting the car to bed for the winter.

Priced to sell, that's all.

how much track time in that year and what street hardware has been stripped from harness? How much to ship to FL?
sounds like a good deal.

thanks, Andy

Do you have a dme?

how much track time in that year and what street hardware has been stripped from harness? How much to ship to FL?
sounds like a good deal.

thanks, Andy

Do you have a dme?

The engine has 66K street miles. After the car was converted to a race car it has run in about six race weekends plus some testing in one season. No endurance type racing at all.

The ECU/custom Conforti chip is included if you buy the harness package in addition to the engine.

The engine harness has had items stripped out of it that are not relevant to a race car such as a/c connections, factory OP/WT, power cords, jumper plugs, etc. It cannot be reverse engineered to work on a street car. If you are putting this engine in a street car you should use your own harness or buy a suitable used stock engine harness.

Although I am not checking for every location, in general it costs about $200-250 to ship a palletized engine from Salt Lake to the east coast. West coast a little less. Insurance might be a bit extra.

Byron

Bump.

And by the way...the reason the engine is for sale is that I am putting in a Euro 3.2 in my race car.

Byron

This is the only time I can ever think of when I WISHED my engine was blown.

This is the only time I can ever think of when I WISHED my engine was blown.

Just miss a shift next time out....:shifty

Poor excuse for a bump I know, but what can I do?

Oh and by the way, race fans, only the engine is available. The race harness and associated equipment as listed has sold.

Byron

Interested. Sent you a PM.

Sold. Thanks all.

That was a sweat deal!