I've got a front Stoptech BBK kit (332mm) for an E36 M3 that I don't need anymore. The whole kit has less than 10 miles(10 not ten thousand) on it. The rotors still have the origanl machining marks from Stoptech! I upgraded to a 4 wheel BBK and do not need this kit at all. The entire kit is in excellent shape and has basically been mounted and used to stop the car when moving it around the garage. It comes with everything that you need to mount the kit and use them. I'll also include a set of Turner Motorsport spacers with the kit.

Please feel free to ask questions if you have any. I would like to see 1500$ OBO.


http://i25.photobucket.com/albums/c70/idings3/DSC08216.jpg

Hey,
Do you think this will fit on a Non-M E36? Because I would love to put this on my newly turboed 328 you sold me that motor mount for.... :)
Also will the Calipers clear 17" wheels....?

bump for a great price and kit !!!

Hey,
Do you think this will fit on a Non-M E36? Because I would love to put this on my newly turboed 328 you sold me that motor mount for.... :)
Also will the Calipers clear 17" wheels....?

Depends on the 17 inch wheels but almost all should though they might require a spacer. The Kosei K1s in 17x8.5s clear our Stoptechs with no spacer required.

wat would compliment the front?

Hey,
Do you think this will fit on a Non-M E36? Because I would love to put this on my newly turboed 328 you sold me that motor mount for.... :)
Also will the Calipers clear 17" wheels....?

Jordan, I don't think they fit the 328 but I'll look it up.This is a page where you can check the caliper clearnce -> http://stoptech.com/tech_info/wheel_fitment.shtml

bump for a great price and kit !!!
THanks man!

Depends on the 17 inch wheels but almost all should though they might require a spacer. The Kosei K1s in 17x8.5s clear our Stoptechs with no spacer required.

Thanks for the help:buttrock

wat would compliment the front?

These are the fronts:)

Hey,
Do you think this will fit on a Non-M E36? Because I would love to put this on my newly turboed 328 you sold me that motor mount for.... :)
Also will the Calipers clear 17" wheels....?

The E36 M3 and 325/328 using a different mounting bracket. I think you either need M3 steering knuckles or see if Stoptech sells the brackets alone.

Vince

Also will the Calipers clear 17" wheels....?
FWIW, I had to run 18mm spacers to clear my brakes (similar sized, if not slightly less-bulky, Brembos) with my stock DS1 wheels.

I still have to run a 3mm spacer with my Fikses. :(

Will that kit fits euro M3?

would 1500 be shipped to 90401 santa monica with paypal?

FWIW, I had to run 18mm spacers to clear my brakes (similar sized, if not slightly less-bulky, Brembos) with my stock DS1 wheels.

I still have to run a 3mm spacer with my Fikses. :(

Through other experience with other cars, the Brembo Caliper's may be less 'bulky' but are wider tahn the StopTech ST-40 caliper that they use on most of their 4-piston front BBK's. Its a bummer that you still have a run spacers with oyur Fikse's :(

I would pick these up in a heartbeat, but i'm in the market for the 355mm 4-wheel. This is a very good deal. BUMP.

The kit is now sold pending funds :D

well if it does not go thru i keep me posted. good luck anyhow

lemme know if it doesnt sell

wow great deal

BTW. Assuming that the cooling vanes follow the pattern of the cross-drilling, I believe that those rotors are mounted on the wrong side of the car. Just a heads up for the next owner.

Nope, they run counter to the vanes.

Are they SOLD, or no?

If the deal falls through I'll make sure and let you know.

Please let me know if this deal falls through. You can even auction it on eBay, and I'll buy it. I've got a 60+ feedback rating.


Cheers,

David

Is this sold. I sent you a message, never got a reply......

u should buy the brembo kit from importrp parrrker they got the best deals

no thanks!

i'm pretty sure that is the place in WA that stole my CC info last time I ordered something from them, and bought a bunch of stuff with it :nono