ok so i have front M3 springs and rear 318ti H&R race springs. that leaves me with a set of front 318i/is/ti springs and rear M3 springs... which effectively makes this a setup for a 318i/is (sedan/coupe if you dont know). anyone need/want them for a crack head price? christmas is coming up. if you know of anyone please let me know. i wanted to let you MOFOs/SW forums people know first. i now have these and a set of Vogtland Sport springs for a 318ti for sale and just sitting in my shed.

So you have a full set of H & R race springs, they just consist of 2 M3 springs--in the rear--and two 318ti springs--up front. I am pretty sure this would work, but it would work on a 325i correct?

So you have a full set of H & R race springs, they just consist of 2 M3 springs--in the rear--and two 318ti springs--up front. I am pretty sure this would work, but it would work on a 325i correct?

correct. you can install this whole setup in a 325i BUT the front is rated for a 4 cylinder so i think that the front will lower more than desired. but i am not sure since the heavier spring rate may be able to cope with the heavier M50 motor. i would not recommend it.

anyone know for sure?

anyone know of an E36 318i or 318is that wants springs? i am going to let these brand new H&R Race springs go for $100 for the set. considering i paid about $500 for the 2 sets of springs i think this is a bargain.

ok putting them on eBay. thanks for looking anyways.

did you sell the fronts?