|
View Full Version : Stock E36 M3 brakes good enough for Dinan SC? Jason C SBB 11-07-2006, 11:11 AM Hi, Would the stock brakes with performance pads on an E36 M3 with a Dinan supercharger be good enough for track days? PJ325i 11-07-2006, 11:32 AM They should if you get some quality pads . . . Or you could get some race pad and swap em at the track . . . Jean-Claude 11-07-2006, 12:11 PM Depends. For some guys stock calipers/rotors won't be near enough on a stock m3. txse46m3 11-07-2006, 12:32 PM Well, considering that you'll likely only get 10 minutes of track time in before the heat soak, stock brakes and good pads should be plenty. techno550 11-07-2006, 12:44 PM Well, considering that you'll likely only get 10 minutes of track time in before the heat soak, stock brakes and good pads should be plenty. :lol funny, but probably quite true. Stock brakes are more than enough for most applications given the right pad and good technique. B.Watts 11-07-2006, 12:46 PM Stock brakes are more than enough for most applications given the right pad and good technique. What he said... s_ribs 11-07-2006, 01:21 PM and good technique. Indeed. Jason C SBB 11-07-2006, 08:49 PM Well, considering that you'll likely only get 10 minutes of track time in before the heat soak, stock brakes and good pads should be plenty. Are you talking about the cooling system or the brakes? ///M3Matt 11-07-2006, 08:57 PM More than enough with track pads and proper cooling Jason C SBB 11-08-2006, 02:46 AM So you mean stock US market brakes with proper pads and any of the aftermarket cooling backing plates and hoses? |