|
View Full Version : Can I borrow somebody's ramps in NoVa Tom153 10-31-2006, 02:32 AM I tried to install my TMS sways today, but couldn't fit the end links into the holes because the links were hanging too low... I'm guessing that's because I did not have the suspension compressed. So can I borrow somebody's ramps for about an hour? vrsixer 10-31-2006, 09:14 AM you're welcome to use mine but I'm up in Sterling... joenationwide 10-31-2006, 10:40 AM Tom, Did you jack up one side at a time? IIRC, If you get both wheels off the ground with suspension in full droop, it should be easy. sKunkman 10-31-2006, 10:48 AM Tom, Did you jack up one side at a time? IIRC, If you get both wheels off the ground with suspension in full droop, it should be easy. +1 Just stick a floor jack under your front subframe support and raise 'er up. shim 10-31-2006, 10:55 AM yea it is definitely easy with the rear suspension in full droop..... i remember one night i shortened my endlinks to about 3 threads showing and i put it on the car with the suspension preloaded......that was a bitch. Tom153 10-31-2006, 11:03 AM I had the front end on jack stands and the end links were just too low and if I tried to lower the tabs on the bar to where they would fit, then the bar would hit the AC bracket... :help BTW I'm using the stock m3 endlinks... ///2K 10-31-2006, 11:08 AM I dont have any ramps, but some extra jackstands if you need. PM me. Phat Ham 10-31-2006, 11:50 AM Tom I have ramps you can borrow but I won't be around at all tonight. The soonest you could get them is tomorrow after work. Tom153 10-31-2006, 02:21 PM Alright, sounds good Hampton. I'll send you a PM. Tom153 11-01-2006, 12:28 AM Thanks to everybody who tried to help out. I got some ramps from a buddy of mine and installed the bar today without a problem. I set it on the soft setting and love the way it feels now! |