I plan on both days but due to limited financial resources, I am taking a pass on the track day to take pics.

I would like to share a room but I need to meet some of you first so it isn't too weird, plus since I am a girl I should make sure you guys aren't nuts ;)
-Kristin

I'm nuts only on the road :evil2 ...

deez are you still planning on staying at your friends?

if not we should all partner up in rooms and stay in the same place.



also we should try to do our michigan meet before BFE so we all know whos who

Actually he is coming home in mid June so we will have to room together. You bringing anyone? Gotta have a co-pilot to get some good footage!! :D


I agree, we all need to get together before the drive so we can put faces with cars/names.

Is there a dyno somewhere around Grand Rapids?
im needin to check the RWHP....
thanks
josh.

Is there a dyno somewhere around Grand Rapids?
im needin to check the RWHP....
thanks
josh.


There is one in Nunica, which is right by Spring Lake or Grand Haven, or there is one that just opened up in Holland but I will have to get the location for you. We are going to set an appoinment there at the end of this month if you want us to add you to the list. Probably be cheaper. Right now there is 6 of us that want to make a pull or 2.

I just got my car off the dyno in Holland.

http://www.ayaracing.com

We are designing a custom turbo kit for my m3 for installation next Winter. He goes by the name Kaz and is very straight forward to deal with.

Please give him a call and he has a forum on his site that he actually responds to when asked questions.

Feel free to ask me any questions, I was there twice this week and my car will be back there this coming week for more work.

Denny

Denny.. do you know about how much they charge per hour?

how much was it for you to go on the dyno?

I cannot get the tap to make holes to install the dead pedal. The plastic for the foot rest is much tougher than I thought it would be.h Can anyone help? Otherwise I'll just sell the piece.

-Kristin

I spent $200 but was there for better than 4 hours installing X-Brace, messing with IAT sensor, talking about turbo design, ect. I got my money's worth as far as I was concerned and it is a mustang dyno.

Here is another thing about Kaz....
He doesn't work on trash. His lot isn't scattered with parts cars, he is not a muffler shop or an oil changing house. He is into the cool stuff and it doesn't appear to me that he needs to do this for a living so he does it because he loves it.

once im running i will have to go try out the dyno.

deez i would like to see you go on it before and after you put on the s/c. im curious what your engine is making right now.

I cannot get the tap to make holes to install the dead pedal. The plastic for the foot rest is much tougher than I thought it would be.h Can anyone help? Otherwise I'll just sell the piece.

-Kristin

Are you just trying to screw through the pedal into the plastic? I could help, but my shop is in Livonia. We just got Jeff's M3 out of the shop today, so there is now room to pull in another car.

I cannot get the tap to make holes to install the dead pedal. The plastic for the foot rest is much tougher than I thought it would be.h Can anyone help? Otherwise I'll just sell the piece.

-Kristin


I have a Makita stubby cordless drill that works perfect for that. If you were closer I could have it installed in like 5 mins. I have done 3 different types of dead pedals on my car, the ACS one (real btw) is the one I have now.


Yeah I know Matt, i would like to see what kind of power I was putting down with just my motor first but I sold my chip/injectors/intake already. Kinda shitty.

I didn't realize that dyno was that close to my work. I work on 120th ave out in Holland. I am gonna have to stop by there tomorrow. Does he still have that Mitsubishi EVO over there?

EMC> Many thanks for all of your hard work getting my car running again. It feels great to have it back on the road. After driving the prelude all winter, it feels like a $100k car. I appreciate your help and will get with you this week to make pmt.

If anyone is interested in a set of BBS RG-R's 18x8.5 with Pirelli P Zero Nero's (only used approx. 3 mos) please let me know. They are a perfect fit for any E36. One wheel has a small rash, other than that they are mint. I have pics if you need them. I thought I would post this here first because I would like to avoid shipping them.

Thanks

Yup, all I have been trying to do is drill through the plastic to anchor the pedal with some screws. Where is the shop in Livonia? I'd love to get some help and check out the place for when I am in need of future work :)

BTW I believe my pedal is also real. But I am never quite sure since it didn't have instructions in the ACS box. I guess it is pretty self-explanitory

Thanks

Kristin

There is an EVO there but not a nice one. The one that is there belongs to my friend and it is getting all of the electronics redone and tuned.

Thanks guys.
Ill give the dyno dude a call. By the way I went to Stanton drag strip Sunday, and pulled a 12.7xx at 110mph. I ran it with my 19's....just how i drive it everyday. also I raced into the 30 mile an hour winds. Im pretty sure withut the NW wind we had, I could break 12.5xx. my60ft time was 2.0xx. ive done 1.8 before... owell it was fun.

josh

Thanks guys.
and pulled a 12.7xx at 110mph.
josh

great number :D ,, u have a monster under the hood!

Yeah, those are really good numbers. Congrats!

Dave

Thanks guys.
Ill give the dyno dude a call. By the way I went to Stanton drag strip Sunday, and pulled a 12.7xx at 110mph. I ran it with my 19's....just how i drive it everyday. also I raced into the 30 mile an hour winds. Im pretty sure withut the NW wind we had, I could break 12.5xx. my60ft time was 2.0xx. ive done 1.8 before... owell it was fun.

josh

What rear tires were you running and what tires do you normally run at the track?

Eric, check your pm

EMC,
I was running Michelin pilot sports. 275/19/30. The tire pressure was a whopping 42psi. They are my normal street tires. When i go to the track I preffer to run the same set up i run on everyday driving. Then I know when someone asks me "whats itt run"..... I can tell them. The way theyre looking at it. I would like to throw some super sticky 18's on, raise the suspension, and even lower the tire pressure to get some super crazy time, but i feel like thats not how i drive it. I even kept my box in the trunk. :buttrock

josh.

Hey guys, the weather is turning and it looks like time to bust out and all meet up. Any suggestions on where and when? And for that matter, where can I get the best deal on a UUC TSE exhaust?

-Kristin :redspot

Ricks..heehee

EMC,
I was running Michelin pilot sports. 275/19/30. The tire pressure was a whopping 42psi. They are my normal street tires. When i go to the track I preffer to run the same set up i run on everyday driving. Then I know when someone asks me "whats itt run"..... I can tell them. The way theyre looking at it. I would like to throw some super sticky 18's on, raise the suspension, and even lower the tire pressure to get some super crazy time, but i feel like thats not how i drive it. I even kept my box in the trunk. :buttrock

josh.

For some reason, I thought that you were driving an M3.

Tamer, I never got a PM from you...?

Hey guys, the weather is turning and it looks like time to bust out and all meet up. Any suggestions on where and when? And for that matter, where can I get the best deal on a UUC TSE exhaust?

-Kristin :redspot

Okay, I will take the lead:
<b><u>Date:</u></b> Saturday Apr 10th at 6:00 pm
<b><u>Location:</u></b> Down Town Royal Oak, at the parking Lot of the South East corner of Main St and 11 mile road (Behind the restaurants).
If you are coming from the east(going west) on 11 mile road, before you cross Main st, the parking lot is on your left hand side.
here is the map (not exactly at the red star)

http://maps.yahoo.com/maps_result?multipleCityState=ROYAL+OAK%2C+MI&Get%A0Map=Get+Map&csz=ROYAL+OAK%2C+MI&country=us

Please confirm who is coming... don't turn me down this time ! :nono


Eric, I sent it again..

Sounds like a great idea. I'll be there!

it's on

-Kristin :redspot

Sorry guys, I will be out.

Dave

So, only 3 are going to meet :confused: ?
what happened to the other guys?

Where'd everyone go?

I'll probably show up. I'm putting my turbo car back together tonight so I can drive it there tomorrow.

Hey All, I probably won't make it tonight - I am going to the Tiger's game this afternoon. Hopefully next time, during the week after work is usually better for me.

I took a little drive in the M Coupe yesterday, went out Huron River Drive from Ann Arbor to Hell...here's a photo:

Sorry I didn't make it on Saturday. I got caught up at my Uncle's house for my brothers birthday.

what's up all, I didn't know you were all meeting this weekend. Guess I should check this forum out more often.

When will the next meet be? I'm dying to see EMC's car now that it's finished and would love to see Deez ride in person as well. Let's setup a BBQ day or something since it's nice out again.

Hey Eric (EMC), I decided after doing some reading not to buy the M5 suspension. I will save up a little and buy a new setup. What do you think about Bilstein shocks or Koni shocks w/ BavAuto Springs or Eibach springs?

Also, I'm ordering a pre-modded cdv from Zacheusen, can you help me do this as I'm not familiar with bleeding hydrolic systems.

I spent about 20 hours this past weekend detailing my car. I buffed w/ a hi speed wheel, polished, waxed, conditioned the leather, etc. It looks really good.

Next weekend I'm changing the oil, atf, and diff fluid, should be fun!

later,

Jim

pic of my new wheels. http://www.acurainspired.com/gallery/data/98f13708210194c475687be6106a3b84/full_45_p25632.jpg http://www.acurainspired.com/gallery/data/98f13708210194c475687be6106a3b84/full_45_p25633.jpg

Nice jo!!! :)

You can do mine next :D

...Also, I'm ordering a pre-modded cdv from Zacheusen, can you help me do this as I'm not familiar with bleeding hydrolic systems.

Next weekend I'm changing the oil, atf, and diff fluid, should be fun!

later,

Jim

What's a "cdv"? Bleeding hydraulic systems/brakes is easy.

I built another 3" stainless exhaust for my car this past weekend. That was more work than I wanted to do, although now it will be easier to duplicate.

i couldnt get out the 10th i was visiting my brother

BW3s tuesday night (tomorrow) in Lake Orion? 7PM?

Dave

Nice jo!!! :)

You can do mine next :D

thanks, but those pics are from last week. I didn't take any pics after detailing b/c it was dark when I finished. It's kinda pointless to take them today b/c it already doesn't look as good.

EMC, CDV= Clutch Delay Valve, it is a small valve located in the clutch line, we would just need to swap it out, fill the fluid back up and get the air out. I would prob try it myself but I don't have a floor jack, stands or a garage.

What would it cost to build an exhaust for my car?

Sorry I didn't make it on Saturday. I got caught up at my Uncle's house for my brothers birthday.

All what I can say is that "You guys missed lots of fun!!" :D

Dave,, tomorrow is a rainy day, I'm not going to take her out(as long as I have an alternative).

sl0moti0n ::: Your car is soo beauttiffuullllll.... :buttrock

HEY theres meets in MI i dont know about!!!! where do you guys usually meet, me and a friend would love to join you guys.

EMC whats your contact info again, me and my friend are still intrested in seeing your shop soon.

Al

please tell me alot of you are going to bimmerfest :alright

Slomotion> I think I have seen your car a few time on the way to work (96E @ US23 to Telegraph rd.). I am sure you had to notice mine as well, a sweet 1991 base model Honda Prelude with faded window tint.

Hey, when you detailed your car did you follow the steps listed in the show and shine forum? Basically, wax bar, 3m cleaner, klass AIO, followed by klass sealant, then optional carnuba finish (also utilizing a PC random orbital sander).

I have alot of this stuff on order and would be curious if you used this formula and whether you think it made a world of difference. I have a couple cars that I would like to detail and sell this spring.

Agapehme> I am going to test the detailing process detailed in the show and shine forum on the old Honda to test the results. If it turns out nice, I would be happy to help you out if you wanted to clean and polish your car. I will keep you posted. Most of the product that I ordered arrives today. Unfortunately, we probably won't have another nice day for a week or so.

EMC> Thanks again for getting the M back up and running.

EMC whats your contact info again, me and my friend are still intrested in seeing your shop soon.


Rally Road Productions, Inc.
12617 Farmington Rd
Livonia, MI 48150
(248)719-3226

I'm there a LOT lately. If the weather holds out tonight, I'll probably get my car out of the shop and my 325is in on the lift so I can get some more turbo work done.

Hey Eric, you got a Dyno by you at all? We are thinking about having a day up here to make some pulls on the Mustang Dyno here if your interested.

thanks eric, ha ha join the club me and my buddies car are both in pieces, but we will give you a call in a couple of weeks, hes having the turbo itch :devillook

I may have seen you before, not sure. I'm on 696 & Tele alot.

Here's what I did.

1. washed twice with Dawn.
2. used some 3M Perfect-it swirl mark remover with hi speed wheel.
3. cleaned the huge mess the hi speed wheel made and washed with plain water.
4. applied 2 coats of Maquiar's Deep Crystal Polish with an Orbital buffer/terry pad and removed it by hand with diaper rags.
5. applied a coat of s100 by hand and removed with orbital buffer/microfiber pad. did this twice.
6. cleaned all glass and put rainex on all exterior glass.
7. washed the entire interior w/ soapy water.
8. Lexol'd all leather
9. 303'd everything on the interior.
10. cleaned the liner with Oxyclean.
11. used Mothers Back to Black on the exterior trim.
12. Polished and waxed my wheels too.
13. stood back and said, "man, my ride is pimpin!"

I've never used a clay bar, what is it for?

I came outside this morning after the rain, ya it sucks that it rained, and my ride looked so awesome with all the water beeds all over it.

Later,

Jim


ps. thanks Tasmir!

Let's try this again,
When the weather is nice we should ALL meet-up. Hopefully more of us can make it.
-Kristin

Let's try this again,
When the weather is nice we should ALL meet-up. Hopefully more of us can make it.
-Kristin

set it up Kristen, I will show! Let's do it the last weekend of this month, does that work?

Sounds good to me, I think it is supposed to warm up soon...

set it up Kristen, I will show! Let's do it the last weekend of this month, does that work?

Set a date.

If anyone is interested, there are weekly meets on Fridays. Lots of nasty cars show up so don't expect anything great but lots of cars and people...It is outside in a parking lot and starts at 8:00. I sometimes go down there. --> www.redlinemotorsport.com

Also, xceedspeed has set their anual picnic date. May 15th and then they are all going to Milan in the evening. --> www.xceedspeed.com

Dave

So you want me to pick a date. Well I will be free of the shackles of oppressive PhD class work starting April 26th. How'z about something like Either Friday April 30th or May 1st. If we go saturday, we might be able to do a run somewhere. As far as a meet point, what did we decide was central?

Hey Eric, you got a Dyno by you at all? We are thinking about having a day up here to make some pulls on the Mustang Dyno here if your interested.

Yeah, there are several Dynos down here. Just take your pick of what kind you want. Mustang, DynoJet, DynaPack...

My family is from Pentwater, over on Lake Michigan. I can always use an excuse to get up there and visit them. Grand Rapids is right on the way.

Maybe when Matt's car is done we can line them up and see how they compare. After I finish some more work, my 325is should also be turbo'd. Maybe I'll be able to bring that one up instead.

So you want me to pick a date. Well I will be free of the shackles of oppressive PhD class work starting April 26th. How'z about something like Either Friday April 30th or May 1st. If we go saturday, we might be able to do a run somewhere. As far as a meet point, what did we decide was central?

hey hey... your incharge of the detroit chapter caravan to bimmerfest... think of htis as your practise run :)

im in BTW for either the 29th or may1st :buttrock

So you want me to pick a date. Well I will be free of the shackles of oppressive PhD class work starting April 26th. How'z about something like Either Friday April 30th or May 1st. If we go saturday, we might be able to do a run somewhere. As far as a meet point, what did we decide was central?

LOL,, why not ;) ..
I think the most convenient location is Royal Oak for most of us,..
May 1st may be better as it's a weekend...

Only Bimmers please! ,, and GL with your PhD mod :cool:

hopefully i can have my car done in a month or soo.

taking out the engine very soon.

psychocandy> That sonuds great. Let me know how it turns out. It looks like this weekend is going to be nice.

May 1st it is.

Where Somewhere in Royal Oak I guess, if it is central.
Time: Depends

So what do you guys want to do. A run? Dinner? Lunch? Something else? Post ideas so we can do something interesting.

if my car is done may 1st id be very suprised...

but that doesnt mean i want to go. :)

maybe i can buy a ride of deezbmw *puppy eyes*

if my car is done may 1st id be very suprised...

but that doesnt mean i want to go. :)

maybe i can buy a ride of deezbmw *puppy eyes*


You got it... :D

Hello all,

Very new around here. I live in Ypsilanti, MI. If anyone is meeting around here, let me know. I'm always down to meet new folks. I think I attached some pics of my baby :) So if you see me, honk, wave or sumthin.

Finally, I am not alone out here in AA.

Welcome.

Be sure to tell us if you want to come to a meeting of some sort at the end of the month.

-Kristin

I thought that was your car at Club Divine...LOL j/k

I'm at Beck and Geddes...so we're almost neighbors.

Sounds like we are starting to get a cohort of people here. maybe a local event for the bitchin weather coming up this weekend. Anyone in the AA/Ypsi area up for a run? I know that Huron River is decent as long as you don't get caught behind a minivan. After Dexter, I have no idea where that road goes.

-Kristin

i ment to say bum lol



deez are you gonna have that day off?

Sounds like we are starting to get a cohort of people here. maybe a local event for the bitchin weather coming up this weekend. Anyone in the AA/Ypsi area up for a run? I know that Huron River is decent as long as you don't get caught behind a minivan. After Dexter, I have no idea where that road goes.

-Kristin
I'm down for a run this weekend... just let me know where and I should be there.

I thought that was your car at Club Divine...LOL j/k

I'm at Beck and Geddes...so we're almost neighbors.

Club Divine... yeah, it wasn't me! I plead the 5th! :) I used to be in that area all the time. I had a friend who lived in those houses on the east side of Beck just north of Geddes. Not far at all.

i ment to say bum lol



deez are you gonna have that day off?


Yeah I will have that off.

Matt and I will be there for the May 1st meet. Just let us know how to get there!! :D

I'm down for a Sunday afternoon run! Anyone else up for it?

I will be there for May 1 and if you decide to have a run this weekend give me a shout, I will try to make it. My cell is 248.756.1600

I also signed up for teh BFE caravan!

Later,

Jim

I'm down for a Sunday afternoon run! Anyone else up for it?

I'm up for it...

I'm available Sunday from 10am-6pm. Just let me know when/where you guys plan to meet and I'll be there...Here's my cell # (734)730-7369.
(looking forward to meeting you guys/girly!)

AA/Ypsi Run this weekend.
Sunday Sunday Sunday (April 18)
Meet point Chili's at Arborland Mall/Plaza (Ann Arbor off of 23) at 10:30 am.
I need to be back in AA by 7pm, so this should be enough time.

We can grab food and drive.

If you want to go, give me a call or reply to this.

510-541-5919

-Kristin :redspot

well, my cell is (734) 323-2396 if sum1 decides to organize sumthin for this sunday.

Lou

AA/Ypsi Run this weekend.
Sunday Sunday Sunday (April 18)
Meet point Chili's at Arborland Mall/Plaza (Ann Arbor off of 23) at 10:30 am.
I need to be back in AA by 7pm, so this should be enough time.

We can grab food and drive.

If you want to go, give me a call or reply to this.

510-541-5919

-Kristin :redspot

That's kinda early... but I guess I'll try and wake up in time to be there :)

Start showing up at 10:30 am at Chili's and be there by 11am or abouts. I just wanna grab some eats since I am out of food at the place and need to go shopping.

I'm in too!! :checkered
Pls guys if only 2 will show up let's know before I leave my house..
Here is my Ph# : (two - 4 - eight-842-3433)

So far, 5 people:
-------------
<font color=pink>
lou10it
MotorcityM3
sl0moti0n
Kris
Tamer
</font>

Anybody wants me to pick him up on my way?! Dave? anybody?

I'll most likely show.

My check engine light came on today so I went up to Autozone (free OBDII scan) and it came up p1397, ignition system or misfire, does anyone know more about this code? I changed my plugs and boots. Erhard FarmHills matched Pacific prices. $7.80/plug $8.40/boot.

I'll most likely show.

My check engine light came on today so I went up to Autozone (free OBDII scan) and it came up p1397, ignition system or misfire, does anyone know more about this code? I changed my plugs and boots. Erhard FarmHills matched Pacific prices. $7.80/plug $8.40/boot.

Exhaust side camshaft position sensor
--> http://tech.bentleypublishers.com/thread.jspa?messageID=50923
u must come to show us your fantastic :)

So how many people are going tomarrow? If anyone is going from Grand Rapids, lets meet up and cruise out there.

josh.

So how many people are going tomarrow? If anyone is going from Grand Rapids, lets meet up and cruise out there.

josh.

Probably 5 or 6 people... if you want I could meet you in Auburn Hills.are you taking 75 south?

I'll probably make it out.

So how many people are going tomarrow? If anyone is going from Grand Rapids, lets meet up and cruise out there.

josh.

Well, thanks to either AA or UPS I can't go. Cars ready to rip but no chip. Matts car is underconstruction as well. There is an open Dyno day today till sundown I am going to head out to today if you want to go check it out. Give me a call if you want to head out there. 616-318-4158

Exhaust side camshaft position sensor
--> http://tech.bentleypublishers.com/thread.jspa?messageID=50923
u must come to show us your fantastic :)

sweet! thanks man!

I can't get this part until Monday, do you think it would be ok to drive on Sunday?

anyone know where to get parts on Saturday?

sweet! thanks man!

I can't get this part until Monday, do you think it would be ok to drive on Sunday?

I don't know,, ask the more advanced people here..

People Coming so far (7)
---------------------
lou10it
MotorcityM3
sl0moti0n
Kris
Tamer
PhilyM5
EMC

Well, thanks to either AA or UPS I can't go. Cars ready to rip but no chip. Matts car is underconstruction as well. There is an open Dyno day today till sundown I am going to head out to today if you want to go check it out. Give me a call if you want to head out there. 616-318-4158
when that chip comes i want a ride :redspot

deez a pick you probably wanna see.
this is your car right?
http://www.dtmpower.net/ppost2/data/514/5777hinjul26-med.jpg

deez a pick you probably wanna see.
this is your car right?
http://www.dtmpower.net/ppost2/data/514/5777hinjul26-med.jpg


Ahh, no shit... That was that first HIN we went to. We won that trophy for biggest crew or hottest crew or something like that. That was the show I got on Overboost.com too. I have a pic of me holding the trophy by the car somewhere..... :buttrock

Sunday...Chili's....I'm there!

9:10am now... See u guys there.

Son of a bit**! I just saw this thread, and I go to school at U of M, would have loved to be there, but I would have shown up late anyway, had a crew race in Ypsi in the morning, may not have been able to catch up to y'all, I will be up in Port Huron (N of Det.) for the summer if another one of these shin-digs goes down! And I should have a new engine in my Bimmer by then! :buttrock

Been away from this board for awhile, had to get the boat out from storage, etc. Was damn nice this weekend. Couldn't make it due to other plans. So how'd it go for everone? I'd be down for an evening get together - maybe Novi? LittleBlue I believe you've been designated as the group Event Planner :D

slowmo: I would try to get the cam position sensor error cleared first, i don't think it will damage anything. BMWs monitor everything and it seems like if there's even a slight blip in the signal it sends up the light. I had the same code, cleared it w/o replacing the part and never saw it again. Just a thought.

So how'd it go for everone?

It was a damn nice ride!!! nice weather, cool cars, very nice curves around Huron river... it was the best drive I have ever had since I got my car :buttrock ... I got Sun Burn from driving 6 straight hours topless :D

Motor City has a Hot damn fast ride!!! his machine is so sweeeeeett!!! good job!

I think our next meet would be May 1st.. hopefully 10+ people will come ;)

Check out new thread for May 1st run
http://forums.bimmerforums.com/forum/showthread.php?t=201383


Also need tips on lowering insurance. They jacked my premium up b/c my dad got a speeding ticket. So if you can beat 2400 /year for 1999 323is, perfect record, student, safety, occasional driver, female, etc. Let me know ASAP

I have a farmer tan on my left arm only from the drive.

2400$ /year !!! OMG.... try Amica.com , they have an 800 number,, mine doens't go over 1200$ a year.. esurance too might be very low.. they gave me a quote < $1100 :)

Kristin: Here is the agent I use. Its AAA insurance but they are usually very reasonable - hell I've got way too many tickets to count and I'm still well under $2K a year. Tell her Neil Wallace sent you (if you don't mind). I need to re-negotiate my rate next year when I turn 25 and have 2 tickets coming off my record by then too so I'd like to keep my name familiar with her. She can be hard to get ahold of but ask for her specifically.

Agent: PAM CAPPER-ADAMS
Title: General Agent
Location/Branch: Sales Agency
Address: 42020 Grand River Avenue, Suite A
Novi, MI 48375
Directions: Located on the north side of Grand River Avenue in the Country Epicure Plaza between Novi and Meadowbrook Roads.
Phone: (248) 347-6969
Fax: (248) 347-6219
Hours: Monday-Friday 8:30 a.m.-5:30 p.m.
Within 6 Miles

slowmo: I would try to get the cam position sensor error cleared first, i don't think it will damage anything. BMWs monitor everything and it seems like if there's even a slight blip in the signal it sends up the light. I had the same code, cleared it w/o replacing the part and never saw it again. Just a thought.


Thanks for the tip but I did try that. I took the harness off blew some air in there had the light reset and it stayed off for a day. Then when it came back on I went to Autozone had them run it again to assure it was the same code and they reset it and it came on again.


I replaced the MAF and Cam Sensor yesterday, both very easy jobs, for $308 (248/maf 60/sensor) thanks to Autostraus in AA for there awesome price on parts. Erhard wanted 479/maf and 156/sensor.

Needless to say, my car runs perfectly smooth again.

Later,

Jim

Kristen, also try Nick Pallas in the Canton AAA office, he's the man!


Later,

Jim

Damn you got some great prices!

Let me know what quotes you get. I am currently paying 2k a year for my 99 M3 and I am 24.

Dave

Wonder if it because is it CA registered? If I can save $$$ I might suck up the loss on the reg fee and switch to this state. It may screw the title value, being a CA car, but I am not selling her. I'll try a couple of places you guys suggested and see what comes up. I checked Liberty Mutual for their BMW special, and it was $1700/year (with my Dad having to be on it).

Eric took me today in a ride in His Turbo M3,,, this was a crazy fun ride, his car pushes so hard like an F16!!
videos at http://forums.bimmerforums.com/forum/showthread.php?t=200715&page=1&pp=25
we missed a :cop: by 1/2 mile,,plain luck :)

Here's the video that Tamer took during the ride...

http://www.rallyroad.net/images/Turbo/EMCturbo04.AVI

Kristin: Here is the agent I use. Its AAA insurance but they are usually very reasonable - hell I've got way too many tickets to count and I'm still well under $2K a year. Tell her Neil Wallace sent you (if you don't mind). I need to re-negotiate my rate next year when I turn 25 and have 2 tickets coming off my record by then too so I'd like to keep my name familiar with her. She can be hard to get ahold of but ask for her specifically.

Agent: PAM CAPPER-ADAMS
Title: General Agent
Location/Branch: Sales Agency
Address: 42020 Grand River Avenue, Suite A
Novi, MI 48375
Directions: Located on the north side of Grand River Avenue in the Country Epicure Plaza between Novi and Meadowbrook Roads.
Phone: (248) 347-6969
Fax: (248) 347-6219
Hours: Monday-Friday 8:30 a.m.-5:30 p.m.
Within 6 Miles
do you know how many points you have?

my license is crazy, i have 16pts.. i lost my license for like 6 months.
I have a drag racing ticket and a trunk full of speeding tickets.

I could give them a call tho it couldnt hurt. thanks :)

I just checked and I only have 8pts currently. Not too bad I guess. Never got a drag racig ticket to stick - went to court twice for that. Lawyer was able to prove there was no defined start and end (requirements I guess for "drag racing" ticket).

As far as Liberty Mutual I just got a sheet from SAE (Society of Automotive Engineers). Through them you can get 10% off for being a member of SAE, and additional discounts for multiple cars, Good Student and other misc. I'll see if I can find the details. Might check into them myself.

I may be alone here, but ZERO points.
Liberty Mutual was great except My Dad has to stay on because he cosigned the loan for the car, even though he doesn't drive it or make payments.

If I can get him off my current policy, I might not change. I made the mistake of re-registering the car in CA and now my insurance has to be CA. It might have been cheaper to reg. in MI and get MI insurance that is comparable.

I may be alone here, but ZERO points.


You aren't alone there, just lucky like me. :D

just got popped doing 132 on 696, I was honest and he wrote me up for 5 over....wooohooo, I'm done speeding for a while, atleast I will try!

Later,
Jim

Jim, this sucks man although you are lucky with the 5 over...132 could be an arrest but the BMW respect factor may be worked.


0 points here too..

Jim, this sucks man although you are lucky with the 5 over...132 could be an arrest but the BMW respect factor may be worked.


0 points here too..

I know, I'm ssooooo freakin lucky! The cop asked, "do you know the speed limit" I replied yas, it's 65" He asked, "do you know how fast you were going" I replied, "a little faster than double that" The cop then cracked a smile and right then I knew I was going to get a little lucky, wow, when he came and said b/c of my honesty he only wrote me up for 5 over I immediately smiled from ear to ear and said "thank you sir, sorry for speeding"


Later,

Jim


edit: he wrote 132/65, pointed it out and said, "don't you dare try taking this to court"

edit: he wrote 132/65, pointed it out and said, "don't you dare try taking this to court"

I'd fight it. :rolleyes:

Last time I got a ticket on 696 it was xmas eve and I was doing less the 10mph over! Which is nothing for 696. What a prick

I got 0 points but I have to keep a good record for my job.

I think Matts got everyone beat though!! ;) :D

I have 0 points again as of last year. Lets hope I can keep it that way.

Dave

What is the cost to reg an E36 (1999) in Michigan?
I was thinking if I switch my reg, I can drop my insurance to Michigan rates (much lower than Cali).

Any input as to cost of first time reg. would be helpful.

What is the cost to reg an E36 (1999) in Michigan?
I was thinking if I switch my reg, I can drop my insurance to Michigan rates (much lower than Cali).

Any input as to cost of first time reg. would be helpful.

may be somthing like 70$ ?? I can't remember since I was overwhelemed by what I paid for the taxes :mad: , stop by the DMV (secretary of state) and ask them..

What is the cost to reg an E36 (1999) in Michigan?
I was thinking if I switch my reg, I can drop my insurance to Michigan rates (much lower than Cali).

Any input as to cost of first time reg. would be helpful.

It's between $100 and $130. All 3 of my E36's are in that range.

$124 to register a '96 328is

Soon I will be free of the yoke of classes and will be able to look into reg and insurance since I am going to be here for at least a few years.

I am thinking about getting an upgrade to 18s and I like either
#46 M3 wheels in hyper black
or ACS Type IIIs (by Moven)

Either would be a replica since ebay has used sets that are still out of my price range.

Opinions?

I thought about upgrading to 17s since the roads around here are so bad. Does anyone here have experience with 17 vs. 18s? Durability, ride, etc? Either way I wouldn't go with super low profile tires - just asking for problems IMHO.

If you are getting 18's, just make sure that they are a forged wheel. 17's and 18's will bend easily if they are not a strong wheel.

I'd shy away from buying replicas. There are lots of people that have had replica wheels bend on them. Ask slomotion (aka Mr. 132 in a 65) what happened to his first set of replicas....although his case would have wrecked most wheels.

I have a couple sets of bent 17's if you want to see how they will feel after a year of Michigan driving. ;)

Yeah I would agree with Eric on the replica deal. I have already read a couple threads about the Movens as it is. Finish starts flaking, then your looking at spending another $125 per wheel to have them refinished on top of what you spent on them in the first place. Try to find a set of damaged "real" wheels. Transwheel out of Ill. is amazing when it comes to refinishing wheels. You can usually pic up a set of damaged wheels for a reasonable price, then another $125 each and they are litterally Brand New!!

I learned my lesson with replicas and other low quality wheels. I got a great deal on a set of 17" Voxx's with 225/40 Nitto's. It didn't take long at all for them to bend. You can't see the bends but they won't balance out at a tire shop. When you are on the road they cause vibrations depending on the severity of the bend. Once the tires wear out they are going in the garbage. It's really too bad because I love the way the wheels look.

LittleBlue> Call John Johnson @ Farmers Insurance (Northville) for the best rates. I can almost guarantee that he will beat whatever other quotes you have received.

Does anyone know anyone in the auto glass industry in Michigan that could give me a decent price on a new windshield? Mine looks like I have driven through Kosovo a few hundred times...

FARMERS INSURANCE GROUP
335 N CENTER ST, NORTHVILLE, MI 48167
J. Johnson 248-349-8990

Sorry, forgot to list the contact info...

I got 0 points but I have to keep a good record for my job.

I think Matts got everyone beat though!! ;) :D
wheres my trophy :(

Yes you should def stay far far away from replicas. My first set were severely damaged by a huge crater on 96 and I was lucky enough to have AAA pick up the tab. It was about 2 weeks of driving on both sets of wheels that all 4 were "out of round." I ended up hitting a big pothole on Meadowbrook Rd. between GR & 11 Mile and damaging the 2 driver side and had to replace both tires. Luckily, once again AAA was able to cover this as well so I bought 2 wheels and AAA picked up the other 2 and tires. Both instances were considered unavoidable road hazards and AAA was able to waive my deductables and did not effect my rate. My new set are replicas but seem to be much stronger than the M5s. I would go the damaged then repaired route as Deez suggested if you are looking for a cheap but reliable solution.

Jim

LittleBlue> Call John Johnson @ Farmers Insurance (Northville) for the best rates. I can almost guarantee that he will beat whatever other quotes you have received.

Does anyone know anyone in the auto glass industry in Michigan that could give me a decent price on a new windshield? Mine looks like I have driven through Kosovo a few hundred times...


If your windshield is cracked and your insurance is as pimp as mine then you should be able to claim it free twice a year w/ $100 deductable. If you call Harmon they will usually pay your deductable, they always have for me. good luck!

Later,

Jim

LittleBlue> Does anyone know anyone in the auto glass industry in Michigan that could give me a decent price on a new windshield? Mine looks like I have driven through Kosovo a few hundred times...

If I have the Choice to replace my windshield, I would buy it from the BMW dealer regardless of the price...the one I got for $330 from an Auto Glass company is not as good as the OEM glass :shifty

Guys, I'm getting bored over here...anybody wants to hang out :help

Guys, I'm getting bored over here...anybody wants to hang out :help

If I would have known sooner, I would have invited you to the Windsor Ballet with a few of my friends. It was a good time!

If I would have known sooner, I would have invited you to the Windsor Ballet with a few of my friends. It was a good time!


Whats the Windsor Ballet? Is it actually Ballet or a code name for strippers? :D

Whats the Windsor Ballet? Is it actually Ballet or a code name for strippers? :D

They are great dancers. Calling it the "Ballet" just doesn't do it justice.

Thanks Eric,, I missed that :(.. may be next time.

I have two sets of wheels for sale. There's a set of 17x8.5 MK1's and a set of 16" 325/328is sport package wheels...with good tires for sale. I'd rather sell them locally and I can accept credit card, etc.

Here's the thread for the 16's.
http://forums.bimmerforums.com/forum/showthread.php?t=203368
Thanks,
Eric

How wide are the tires on those MK1's? Do you think I could swap over my 225/40 Nitto's?

If I have the Choice to replace my windshield, I would buy it from the BMW dealer regardless of the price...the one I got for $330 from an Auto Glass company is not as good as the OEM glass :shifty

Thanks for the advice, unfortunately, I don't think I am financially ready to pony up for OEM glass....$330 seems like alot, I was quoted $200 or so last year, but I never had it replaced. Damn windshield was perfect before driving locally. :mad:

in the spirit of saving $$$, who here can help me change the oil in the beast and reset the bar thingys? I am not in a position to pay BMW in AA 120.00 to F-up my car.

Also don't forget that we are running this Saturday.

Hey...just called Allstate and got a quote from them and I am 24 with one ticket and it is still only 840 for 6 months. Once I turn 25 and the ticket goes away it will be low 7XX. This is for 500 & 250 also. I think it is a hard price to beat.

Dave

I am with Allstate now and it was about 800/6 months before. I am going to talk with them this week and see what I can do.

in the spirit of saving $$$, who here can help me change the oil in the beast and reset the bar thingys? I am not in a position to pay BMW in AA 120.00 to F-up my car.

Also don't forget that we are running this Saturday.

I use the TopSider to drop off the OIL.

psychocandy: I think $330 was the cheapest you could ever get.. may be it was $300+ ... and yaah, driving anywhere in MI is the worst, I already have 2 chips in the new windshield :rolleyes:

Hey...just called Allstate and got a quote from them and I am 24 with one ticket and it is still only 840 for 6 months. Once I turn 25 and the ticket goes away it will be low 7XX. This is for 500 & 250 also. I think it is a hard price to beat.

Dave

What's the contact info for your allstate agent. I really need to lower my rates on my ti and check rates on an M3.

Her name is Diane and her # is 586-792-9000. My dad is switching over to her too. His insurance on his IS300 w/ 4 points dropped from 1150 for 6 months to 370.

Dave

in the spirit of saving $$$, who here can help me change the oil in the beast and reset the bar thingys? I am not in a position to pay BMW in AA 120.00 to F-up my car.

Also don't forget that we are running this Saturday.

We can do it at the shop Saturday before the drive. You can reset the oil service light with a paperclip or small piece of wire. I'll show you how....its easy.

Just buy the oil and filter, and bring it with you. It takes 15 minutes.

Even Rob did it by himself. :rolleyes:

Hey Rob, I haven't had time to check out that M3 as of yet. Maybe tomorrow since I have to be at the shop early to meet somoene that wants a set of wheels.

WHAT DRIVE Eric!!!!??????!!!!!! :nono

WHAT DRIVE Eric!!!!??????!!!!!! :nono

May 1st man! :devillook

did I just see snow?!!!!! :eek: :confused:

Time, Place and where to????

It was snowing like a bitch over here this morning....... :mad:

Even Rob did it by himself. :rolleyes:

Hey Rob, I haven't had time to check out that M3 as of yet. Maybe tomorrow since I have to be at the shop early to meet somoene that wants a set of wheels.

you're dam skippy I did it by myself! :stickoutt But, thanks for the lift. :D

Will somebody answer my question!!!!

May 1st drive.....Time, Place and where to????

Will somebody answer my question!!!!

May 1st drive.....Time, Place and where to????


http://forums.bimmerforums.com/forum/showthread.php?t=201383

Will somebody answer my question!!!!

May 1st drive.....Time, Place and where to????

Eric's Shop in levonia, address is here somewhere.. and time would be around 11 am.

Just got 2 matching all season tires, took it over 125 mph and runs now like a mother trucker... :D

Thanks!!! I'll be there at noon.

psychocandy; ARe you going? :redspot

Thanks!!! I'll be there at noon.

psychocandy; ARe you going? :redspot


Noon? by noon we will be by Tensessee or something!!

Ok Erics between 11 and no later than noon for those coming from further away.
Eric please post an address for us.

No replica wheels then.
Either used ACS Type IIIs or OEM E46s.

Still hunting the insurance deal of the century.

Liberty Mutual with my Dad and his speeding ticket plus me (under 25) makes it 1700 a year with some pretty high end coverage.

LittleBlue -

If you're going OEM let me know exactly what you want (part # is best). I get parts at wholesale.

Might be joining everyone on saturday. I'd like to meet everyone. But I've got a bachelor party that night that I've been planning.

Any buddy deal with internet scammers? I just got a phony cashiers check (likely I'm not out anything) and I'd like to see this a$$hole pay.

I think that if I want to go OEM I need to get 4 front wheels, but I am not sure if that will work. I don't see any reason why not but you never know. Can you get light fixtures? I was looking at going with clears around the car (corners, sidemarkers, and euro rears) but price will determine whether this is a good idea.

Insurance hunt

Comparable coverage from AAA is 820 / 6 months (with a $200 discount for credit union account)

Liberty mutual: Rated as 25 years or older simply for owning a BMW
If your collision deductible is 1000.00 then the premium is 1300 a year

I'll find out about the clears. It would be cheaper to buy off brands but I'm not sure about the tailights as I know some brands throw up the check brake light circuit dispaly.

you really need 4 fronts? Is there a different offset with E46s?

Cool pic!

Insurance hunt

Comparable coverage from AAA is 820 / 6 months (with a $200 discount for credit union account)

Liberty mutual: Rated as 25 years or older simply for owning a BMW
If your collision deductible is 1000.00 then the premium is 1300 a year

Did u call Amica? $1000 deductibles is too high,, $500 is reasonable..
there are few coverage items that are recommended so you would be totally covered in case of any serious accedient.. I could give you more details if you want..
...For your case if you get $1300 with $500 deductibles and high coverage that would best...

tough to get the 1300 without raisinn my deductible. I might have to stick with the 1600 I have right now, pending I can get it down by removing my dad from the policy.

I have called LM, Allstate (current carrier), and AAA.

I could take the cheap-ass way and get no-fault, but I prefer not to. It is worth the extra 1000 to not have to pay in case of an incident.

Apparantly, the offset in the rear of the OEM E46 M wheels is too much for the E36

Wheels are going to have to be put on hold until I can sort out my insurance and how much it might actually run. But if you want to run a price check, it would be cool.

I looked at ebay and figured I might be able to assemble a set for 400-500 and then tires would be a lot of money.

I think that if I want to go OEM I need to get 4 front wheels, but I am not sure if that will work. I don't see any reason why not but you never know. Can you get light fixtures? I was looking at going with clears around the car (corners, sidemarkers, and euro rears) but price will determine whether this is a good idea.

I'd recommend either Pacific BMW or Circle BMW for getting the OE clears all around. They have by far the best prices and you are gaurenteed to get original equipment bmw parts.

I'll check on the clears and rims. I want the clears too. Pacific and Circle are great to work with but I work with a local dealer w/ no shipping.

tough to get the 1300 without raisinn my deductible. I might have to stick with the 1600 I have right now, pending I can get it down by removing my dad from the policy.

I have called LM, Allstate (current carrier), and AAA.

I could take the cheap-ass way and get no-fault, but I prefer not to. It is worth the extra 1000 to not have to pay in case of an incident.

Call John Johnson at Farmer's insurance in Northville for the best deal, your wasting your time with these other places. He is the cheapest around. I gave the contact info earlier in this thread. With the money you save you can get your clear OEMs all around....

Thanks!!! I'll be there at noon.

psychocandy; ARe you going? :redspot

Hey Andre,

I hope you guys have a great time out there, unfortunately the timing of this event wasn't the best for me, falling during the last week of the month, which is our busiest time at work. I couldn't swing the time off.

Let us know how it goes and drive safe out there.

FYI - The BBS RGR's are sold, $2,150 to a guy in NY.

kristin before you bye your rims make sure to check out the classifieds on here and DTM, theres always great deals on pretty much and rim combo you can imagine.

hoe long you figure EMC's tour will be, we wont be leaving till 12(takes 1/2 hour to get there depending on tunnel traffic), unless of coarse we get someones # to call in case we miss you guys and we can meet up somewhere

..hoe long you figure EMC's tour will be, we wont be leaving till 12(takes 1/2 hour to get there depending on tunnel traffic), unless of coarse we get someones # to call in case we miss you guys and we can meet up somewhere

The "tour" will take about 5 minutes. There's not much to see. :)

Are u guys sure about driving in the Levonia area? Last time I was there a cop came from nowhere...I would be worried to go over 60 mph.

We'll leave from there although I am still waiting for the route from Jim. <nudge>

Are u guys sure about driving in the Levonia area? Last time I was there a cop came from nowhere...I would be worried to go over 60 mph.

Livonia (notice the spelling) cops suck A$$, got nabbed there last summer for "squealing the tires" of all things. Idiot lied in court too (to the magistrate). He didn't even remember the occurrence stating that the offense took place at a stop sign, when in fact I was proceeding through a green light.

Be careful in that area or you will be contributing to the well-being of the Livonia community as well...

deez any chance you will get geting out there?

Off topic...anyone looking at upgrading their washer, dryer or lawn mower? I just bought a house and these are things that I am going to need pretty soon after I move in...so in about a month or so.

Dave

Who is going tomorrow? Please add your name:
Tamer, Kris, EMC,

Who is going tomorrow? Please add your name:
Tamer, Kris, EMC, Neil (kinda)

I'm not going to have time for the drive but would like to meet everyone.

Livonia is where I grew up and the cops are bad. But then again they are just as bad in Plymouth, Northville, etc. I would head downriver or out towards the country. I know there's some nice backroads that take you to Hell, MI.

Who is going tomorrow? Please add your name:
Tamer, Kris, EMC, Neil (kinda)

I'm not going to have time for the drive but would like to meet everyone.

Livonia is where I grew up and the cops are bad. But then again they are just as bad in Plymouth, Northville, etc. I would head downriver or out towards the country. I know there's some nice backroads that take you to Hell, MI.


Hey guys, I will be at Eric's shop tomorrow, as far as a route I will have Cherie hook something up tonight. E Hines Drive would prob be nice. I will NOT be speeding at all tomorrow. 2 more points and I'll be suspended :( .

Hines Drive is awesome. Just do not speed!!!!! The speed limit is real low and the cops make it a real mine field. that said it is one of the nicer roads in the area to drive, especially on a nice sunny day.

Hines Drive is awesome. Just do not speed!!!!! The speed limit is real low and the cops make it a real mine field. that said it is one of the nicer roads in the area to drive, especially on a nice sunny day.

I used to go on Sunday morning (6 a.m.) autobahn runs with a few bmw guys. We would take walkie talkies, radar detectors, then chat to let each other know what was up. We hit 140+ a few times on every run. That was a lot of fun, but it sure was dumb. Tamer and I hit 80 in a 25 when we saw that cop. I thought that the road was deserted and we even checked it just to make sure nobody was around. I didn't want to do anything un-safe...at least I could have used that in a court argument. :nono

Oh...and I had some dumbass in an old corvette trying to race me the other night. I burned him pretty good from a roll about 3 or 4 times. Then, when we were sitting at a stop light, he does this big tire squeeling halfass burnout once the light turned green. It would have been cool if he had about 200 more horsepower.

Anyways...he's doing about 80 and can't even keep his car in his own lane. There's a cop going the opposite direction...he doesn't do a damned thing. I bet if that was me, I'd be pulled over in a heart beat.

It would have been cool if he had about 200 more horsepower.


:lol: ...
yah no speeding.. :confused: ..
how about the other guys,, MotorCity,, louli...I thought we are gonna have over 10 people tomorrow!

I'm sure the weather has a lot to do with it.

We need to schedule a date for Waterford Hills when the weather turns good and more people have their cars out. I'm down for going to the dragstrip sometime soon as well.

I'm sure the weather has a lot to do with it.

We need to schedule a date for Waterford Hills when the weather turns good and more people have their cars out. I'm down for going to the dragstrip sometime soon as well.

June 12th, the head of the Chrysler design studio is hosting a track day at Waterford. If anyone wants the invite, please let me know. I know that "heetandtoe" aka Jeff will be there. Lets not let him wus out and take his 328is instead of his Mcoupe....

I think that the fee is only $115. Thats a bargain for a track day. I hope to have one of the turbo cars there to pick on some people's more expensive toys. :devillook

I will come to watch :)
Tomorrow = RIAN :( ... no top down....
Eric: I just got the panties for my car (butt strut).. could we do it tomorrow before the run? before or after Kris's Task..

hahaha this is damn funny, he will be at Oakland mall tomorrow!!
http://www.williamhung.net/photos/CDCovers/5.jpg

What task?

oil change I remember?

Bring it with you Tamer. It will only take a few minutes to install.

Wait is that tomorrow? I never got a confirm from anyone that it would be educating Kristin day. I don't even have the oil, although that can be remedied if I knew what to get.

:lol: ...
yah no speeding.. :confused: ..
how about the other guys,, MotorCity,, louli...I thought we are gonna have over 10 people tomorrow!

I'm going to try and be there, but I may be going to some graduation BBQ's tomorrow, so we'll see...

Bring us some BBQ

June 12th, the head of the Chrysler design studio is hosting a track day at Waterford. If anyone wants the invite, please let me know. I know that "heetandtoe" aka Jeff will be there. Lets not let him wus out and take his 328is instead of his Mcoupe....

I think that the fee is only $115. Thats a bargain for a track day. I hope to have one of the turbo cars there to pick on some people's more expensive toys. :devillook

I am planning on being there, haven't decided which car yet - maybe I'll bring both! I am leaning towards the 328 though, I might save the M Coupe for Gingerman (more runoff room there...) Hope some of you can make it, even if it is just to watch. Bring a helmet, passengers are allowed!

It was good meeting everybody at Eric's today, too bad it wasn't a little nicer out. Thanks for hosting Eric!

Speak of the devil,

My last green bar is gone and the inspection light came on. I think it is up for Inspection II and an oil change. The cost is pretty high (400-500+). Any way to cost cut? I have to do the it to stay with my warranty. And I am not fond of Ann arbor BMW. Send help or suggestions.

so what was the final outcome of today's meeting? I had some great bbq :D

We split, weather bad.

Another time we will have #s for people and figure out if we are waiting for people.

Inspection II is a huge Checklist and $400 sucks but what else can you do other than a DIY...
The outcome was disappointing, I was surprised that everybody was just there for few hours, this was supposed to be a 3 hours + gathering. We could have postponed it if we knew that...and weather sucks too...
Anyway next time...

Is it really about $400, b/c in California II is like 600.00

I just a hit a frickin' coon or possum on the highway a minute ago on the way home. It knocked out my passenger side foglight... that bastard!! :mad: I'll have to check and see how extensive the damage is in the morning... this friggin' sucks...

This sucks lou..what you were doing ? it's not an autocross! hopefully it didn't damage the bumber. Im sure it did scratch it..

Kris, u might need to call and ask, here they say 400 - 500 $ range.. http://www.bimmerzone.com/inspection.htm

This sucks lou..what you were doing ? it's not an autocross! hopefully it didn't damage the bumber. Im sure it did scratch it...


I wasn't doing anything but cruisin along at about 80 when at the last minute, whatever it was, ran out in front of the car, there was nothing I could do to avoid it.

I just checked the car... fog light, gone. Brake duct is gone too... :mad: Looks like I'll be in the market for both of those. This sucks...

$500 for inspection II

Lou, for the fog light get OEM from Pacific BMW, it is like 50% less than any other dealer.

That must have been a big raccoon.

Eric,

Can you do an INSPECT2? I have an appointment on Friday at 8 am.

I might just go ahead and pay to keep my warranty and this should be the last oneuntil the warranty is up.

Eric,

Can you do an INSPECT2? I have an appointment on Friday at 8 am.

I might just go ahead and pay to keep my warranty and this should be the last oneuntil the warranty is up.

Yes, its easy enough to do. But...if you must go to the dealer to keep your warranty...thats what you better do.

So anyone interested in going to Lapeer this weekend? I was thinking of heading up on Saturday. Anyone else interested?

Dave

So anyone interested in going to Lapeer this weekend? I was thinking of heading up on Saturday. Anyone else interested?

Dave

What's going on at Labeer?

I was thinking of heading to lapeer drag strip to see what the M3 will do in the 1/4.

Dave

I was thinking of heading to lapeer drag strip to see what the M3 will do in the 1/4.

Dave

Sweat :buttrock , I would love to do that too!
Is that the one http://www.lapeerdragway.com/whenf.html ?

Yeah I am not sure if it has to be done at the stealer or not, I just know it has to be done

$500 for inspection II

Lou, for the fog light get OEM from Pacific BMW, it is like 50% less than any other dealer.

That must have been a big raccoon.


Autostraus in A2 will match Pacific prices if you don't want to wait for shipping.

Jim

Current Car Insurance Update:

Liberty mutual will insure me for 1471 a year (No one else but me)

Allstate: Between 1700-1900 (without my Dad on the policy)


Plus they (LM) are fast to get the quote the underwrite.

Tamir, we will have to talk on Friday. I will know for sure if I am going. I will PM you my contact info and if you could do the same we can try to schedule something.

Yes, that is the track. It looks like another guy from my club may show up also.

Dave

Dave u better go, I'm preparing a PH.D in drag racing now! :D

hehe...hope for good weather.

It should be a learning experience for me too. I can launch a FWD car quite well but we will see how I do with a RWD.

Dave

Can anyone here do a brake fluid flush? The car is at the dealer right now and they want 90.00

Can anyone here do a brake fluid flush? The car is at the dealer right now and they want 90.00

I know how to do it. It's a pretty easy job that I was reluctant to do by myself the first time. I ended up doing it and wondered why I thought it was such a big deal. With a person to help and some clear hose from Home Depot you could do it too.

nevermind I'll have them do it one last time

nevermind I'll have them do it one last time

Having a BMW sucks, isn't...

only when the bill comes

I wouldn't sweat it too much. you're still in school and would be a royal pain to do in the parking lot. Plus it can be time consuming your first time.

hehe...hope for good weather.

It should be a learning experience for me too. I can launch a FWD car quite well but we will see how I do with a RWD.

Dave

LOL, wan't it sunny yesterday!

Yeah, but that was around 2-3 when things started clearing up. I am pretty sure the track never opened because they probably didn't have enough time for it to properly dry. We will try to plan another weekend soon. Maybe Memorial day or something.

Dave

I rolled out to the SCCA Auto-X at Ypsilanti Willow Run today and got a huge-ass sunburn. I am talking like rasberry red. I did a ride along with a friend and it was really fun. maybe I'll try it if I can save the tires. I saw some mighty three-wheeling action, cone-punting, and spin-outs.

Hey Ken, have you gotten your new heat shield? Let me know, I am loosing some power without a heat shield. :)

Guys, I think the leaking problem is continuing to happen in my car, It was smelling bad and I opened the hood and some oil is spread under... might be as simple as tightening the Oil Filter cover or might be somthing else..Also It started to make some wired random noise like wsoooooooweeee,.. I don't know what the heck is going on...

Eric, are u our non-official service center now? if so, you might wanna take a look at it soon. I will try ti tighten the cap more and where the OIL is coming from...The OIL level is not bad so I don't think it's leaking too much..

Tamer

Guys, I think the leaking problem is continuing to happen in my car, It was smelling bad and I opened the hood and some oil is spread under... might be as simple as tightening the Oil Filter cover or might be somthing else..Also It started to make some wired random noise like wsoooooooweeee,.. I don't know what the heck is going on...

Eric, are u our non-official service center now? if so, you might wanna take a look at it soon. I will try ti tighten the cap more and where the OIL is coming from...The OIL level is not bad so I don't think it's leaking too much..

Tamer



Does it make that noise when you are turning? lol, I tried to do that noise out loud.......I gotta sound like a tool. If its when you turn, could be power steering fluid. Mine leaks sometimes, not sure where the hell its coming from but I have noticed it.

Does it make that noise when you are turning? lol, I tried to do that noise out loud.......I gotta sound like a tool. If its when you turn, could be power steering fluid. Mine leaks sometimes, not sure where the hell its coming from but I have noticed it.

Damn Coolant :mad: http://forums.bimmerforums.com/forum/showthread.php?t=209113

Tamer, sorry I missed your call.
If you can make it out this week, let me know.

I don't know if the car will make it to Livonia with the leaking issue :(

Sorry to here that Tamer, probably a good thing that we didn't make it to the track last Saturday.

On another note, anyone planning on going to the Xceedspeed picnic at Stoney Creek this Saturday?

Dave

Alright, anyone interested in going to Lapeer this Sunday???

Dave

Alright, anyone interested in going to Lapeer this Sunday???

Dave

come work with me on the thermostat thing and we will go on sunday :D
unless u want me to drag race the Camry :D

Sunday sunday sunday
I'm free but my car isn't exactly made for drag. Still....

Everything works for the drag. I found online that my Camry has 1/4 mile of 16.31 s @ 86.85 mph :D ..

what would i need to do this thing?

I got nothing else to do but race
We could crash the SCCA TSD rally in Ann Arbor on Saturday night

To race at Lapeer all you need is a car, 25 bucks and a helmet (if you don't have a helmet, you can rent one there for like 5 bucks)

Let me know if you are serious about going.

Dave

Also you want to remove any unwanted wieghts from the car, like extra gas, speaker.. etc...Also some launching tips...
If you guys are going, I might come to watch..

Call me on Sat or Sunday if interested Tamer or anyone else for that matter (PM me if you want my contact info.)

Dave

i'd like to watch but launching... i dunno, I have to race Tamir in a re-match :)
I'd probably get my a$$ handed to me on a plate.

Come on, 25 bucks...if you drive up there, you will want to race for only an extra 25 bucks. I don't want to just race by myself.

Dave

BTW, anyone planning on coming to the Xceedspeed picnic at Stoney Creek on Saturday?

Dave

Anyone in? I don't want to have to go beat all the mullets by myself.

Dave

Anyone in? I don't want to have to go beat all the mullets by myself.

Dave

Hey, when are u going? if it's around noon, give me a call around 11 on my cell, I might be done at the shop by that time, hopefully.

Tamer

I am going to prob head up there around 10 or so so I get there around 10:30-11ish

I can get you directions so you can meet me up there. Or just try to get done earlier and we can head up together...get it all taken care of on Saturday and then you will be golden for sunday.

Dave

I am going to prob head up there around 10 or so so I get there around 10:30-11ish

I can get you directions so you can meet me up there. Or just try to get done earlier and we can head up together...get it all taken care of on Saturday and then you will be golden for sunday.

Dave

we will see, If I get done in a reasonable time, I might find you there at the Park.
BTW, you never sent pics of your car :confused:

oh, there also a drag race tomorrow at 6pm!

http://www.activeperf.com/members/photo.php?photo=DSrugis09.jpg

http://www.activeperf.com/members/photo.php?photo=DSrugis04.jpg

http://www.activeperf.com/members/photo.php?photo=DSrugis03.jpg

http://forums.**********************************.php?atta chmentid=66840.jpg

http://forums.**********************************.php?atta chmentid=66841.jpg

http://forums.**********************************.php?atta chmentid=66842.jpg

Dave

deez how is the car running now?

the rest of my stuff comes tuesday :)
im gonna need a rear pretty quick